Bridgeport Fittings, Inc.
Stratford, CT 06497
Aug 27, 2008 Designed for use with aluminum interlocking armored all purpose MC Cable, MCI-A line of cable connectors includes Whipper-Snap single-screw, strap-type connectors to connect 14/2 to 10/4 MCI-A cable to box or enclosure. It also includes Whipper-Snap 2-screw, strap-type connectors for use with 14/2 to 10/3 MCI-A cable, Whipper-Snap snap-in, U-shaped strap connectors for use with MCI-A cable 14/2 to 10/3, and E-Z Lock connectors to connect 14/2 to 10/4 aluminum MCI-A cable.

Bulgin Components PLc
Barking Essex IG11 0AZ  United Kingdom
Aug 27, 2008 Available in flex, flex in-line, panel mount, and flange mount types, 10 pole Buccaneer Connector with body shell that features sealing properties of IP68 dust and water resistance to be maintained. UL, CSA, and VDE approved unit features ratings up to 32 A, 600 Vac/dc, temperature range from -40 to 85°C, and accommodates cables with 7-22 mm dia.

Molex Inc.
Lisle, IL 60532-1682
Aug 22, 2008 Based on .059 in. wide ISO blade-type terminal system, MX150(TM) supports low-level signal as well as power applications up to 22.0 A for space-conscious, small circuit applications. Solution offers sealing reliability for SAE wire gauges from 14-22 AWG as well as metric size wires, while offering terminal-to-housing retention forces that meet/exceed USCAR-2 requirements. All-in-one plug and receptacle housings have pre-assembled interfacial seal and terminal position assurance.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Aug 20, 2008 Designed for PDUs requiring small form-factor interface, 20 A ET Connector offers integrated coding contacts which allow electronic functions to be designed into PDU electronics with activation on full insertion of cable connector. It uses crimp contacts from Standard Power Timer range, with current ratings of 20 A with 2.5 mm² cable. Unit is available in trays, with contacts on reels for customer assembly or fully assembled to specific customer requirements.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Aug 20, 2008 Z-PACK TinMan orthogonal connector system comes in 6 x 6 (36 differential pairs) module which offers 25 Gbps, and 6 x 12 (72 differential pairs) module that delivers 20 Gbps. Modules are designed for high speed differential architectures and utilizes midplanes with front and rear card interfaces. Available with vertical headers and right angle receptacles for perpendicular interconnect solutions, system provides routing capabilities and short traces.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Aug 20, 2008 With compact size, High Performance Interconnect (HPI) 2 mm locking connector series is available in single vertical row style and in different colors to allow customers to color code their systems. Accepting 30-24 AWG wire, it is rated 3.0 A at 100 Vac/Vdc and 1.0 A at 250 Vac/Vdc, and insulation OD range is 0.9-1.5 mm. Suited for -25°C to +85°C temperature range, disconnectable connector can be used in plasma display panels, LCD monitors, and small electronics equipment.

Omega Engineering, Inc.
Stamford, CT 06907
Aug 19, 2008 Allowing wire to be connected without any prior stripping, XBQ series of insulation displacement connection terminal blocks are suited for applications in automated equipment and machine tools, packaging and material handling machinery, railway/mass transit systems, petrochemical, and any other application requiring high volume connections for low-voltage control and signal circuitry.

Altech Corp.
Flemington, NJ 08822
Aug 19, 2008 Ranging in length from 10-120 mm with heights of 10.8 mm, SHS connectors offer horizontal or vertical mounting options and modular design for application adaptability. These pluggable black PCB blocks are available in 2-24 pole versions with 5.0 mm pitch and current ratings up to 10 A @ 250 V. Horizontal plugs clamp using galvanized steel tubular screw with tin-plated brass wire protector, and female plugs are engineered to pair with male PVS connector.

Molex Inc.
Lisle, IL 60532-1682
Aug 19, 2008 Available in shielded and unshielded versions, BradConnectivity(TM) Micro-Change® M12 12-Pole Connection System is offered with standard or Ultra-Lock(TM) connection. Cordsets are IP67/68-rated, Ultra-Lock versions are IP69k-rated, and all withstand harsh industrial environments. O-ring radial seal is operator-independent, eliminating chance of over-tightening or under-tightening. There is also no twisting or turning, and cable is UL/CSA-approved as well as halogen-free.

Binder-USA, LP
Camarillo, CA 93012
Aug 18, 2008 Series 713, 715, and 825 male/female field-attachable connectors use internal iris spring, which enables connection between cable shield and connector body and installation of braided or metal foil shield with 360° protection from EMI. Available with A-, B-, or D-coding, they have 4 or 5 gold-plated contacts and cable outlet that accepts cable diameters from 5-8 mm. Suited for automation and industrial network applications, IP67-rated units protect against ingress of water and dust.

ETCO Incorporated
Warwick, RI 02888 1501
Aug 14, 2008 ETCO Specialty Terminals featuring dual-gauge materials can combine 2 functions, such as rigid tab or connector with formable ear section mating end. They are suitable for designing terminals and connectors incorporating multiple bends and forms. Allowing engineers to specify parts 0.032 in. thick on one end and 0.016 in. thick at other end, units can be fabricated from any alloy in sizes from 0.008-0.900 in. thick with ±0.002 in. tolerances.

Canfield Connector
Youngstown, OH 44514
Aug 13, 2008 Series 5FFAC and 5JFAC feature molded solenoid and molded plug and play design for rapid installation, and low-profile straight line configuration allows for installation in limited space applications. Both models feature bi-directional indicator lights, load suppression, ambient temperature rating of -25°C to 80°C, and meet environmental protection to IP67/NEMA 6 standards. Connectors are available in DIN sizes to round sizes 8-12 mm straight as well as UL and CSA versions.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Aug 12, 2008 Available with 3-6 pin contact arrangements, RoHS-compliant Mini-XL Series accommodates both cable and panel-mount applications. Units feature socket insulator that minimizes vibration and electrical noise, disconnect latch lock, gold-plated contacts, and low reflectivity satin finish. Rear housing is available in plastic or metal for male and female plugs. Applications include recording equipment, microphones, amplifiers/speakers, medical instruments, and industrial controls.

Amphenol Corp., Amphenol Aerospace
Sidney, NY 13838
Aug 08, 2008 Designed for use in ruggedized and environmental applications, fiber optic connectors use MIL-DTL-38999 Series III connector with special insert that accommodates commercially available MT fiber optic ferrules. Each MT ferrule can accommodate up to 24 fiber optic channels for total of 96 circuits in connector shell size 21 package.

C & M Corporation
Wauregan, CT 06387 0348
Aug 04, 2008 Reducing stress and strain from electrical conductors' termination points, hard/soft strain relief is engineered with anti-twist function as well as elimination of pistoning action of conductors inside cable jacket at termination point of assembly. It meets or exceeds straight pull test of its corresponding cable and connected assembly. Weighted 180° tick-tock flex tension testing achieves 750,000 cycles. Unit can be produced in PVC (and its alloys), polyurethane, and TPR.

Binder-USA, LP
Camarillo, CA 93012
Aug 01, 2008 Suited for applications where space is limited, Series 768 shielded M8 right-angle connectors feature metal shell with IP67 rating for harsh environments and internal 360° shielding ring that provides EMI protection in industrial and automation applications. Male and female connectors are available with 3 or 4 solder contacts with up to 4 A current load, and cable outlet allows cable diameter of 3.5-5 mm.

AVX Corp.
Myrtle Beach, SC 29578
Aug 01, 2008 Rated for use at up to 650 V, 9177 Series insulated displacement connectors can handle up to 15 A and are suited for applications such as high voltage inverters in lighting industry and other high-performance industrial equipment. Available as single contact version for separate power handling or 2- and 3-way configurations, connectors offer user flexibility of placement on PCB for single or multiple wires. Devices are end-stackable for larger pin counts.

SOURIAU
York, PA 17402
Jul 31, 2008 Designed for 500 coupling/release operations, Model 8D36 is used as electric interface to transmit signals between planes and onboard weapons systems, such as missiles, observation pods, or smart bombs with GPS guidance systems. With mechanical uncoupling system, unit can function at ejection speeds of over 10 m/sec with angles of incidence of up to 20° compared with the vertical axis of the connector. They are available in cadmium or nickel.

3M Co., Electronic Products Div.
Austin, TX 78726
Jul 28, 2008 Measuring 2 x 2 mm, 3M family of latch/eject headers feature 13-pin count options from 6-50 positions. Connector bodies have cut-out to accommodate mating connectors with centre bump polarization and are made from PCT resins, allowing for high-temperature processing in lead-free environments up to 260°C in compliance with JEDEC J-STD-020C standard. Family offers RoHS compliant straight and right-angle plated pins, and through-hole tails for boards up to 31.75 mm thickness.

Duraline Div., J.B. Nottingham & Co., Inc.
Islandia, NY 11749
Jul 17, 2008 Protected against ingress of dust, water, and other contaminants, SOFTPower series is comprised of environmentally sealed connectors able to withstand harsh environments. Factory prewired molded-to-cable connectors provide portable and modular power for industrial machinery. Offering NFPA-compliant components that help reduce maintenance activities and downtime, products meet crush and impact resistance requirements of type (MC) metal clad cable.