Duraline Div., J.B. Nottingham & Co., Inc.
Islandia, NY 11749
Apr 10, 2008 Rated at 15 A and 600 V, Models FTP-2 and MTP-2 consist of 2-wire polarized plugs, connectors, and receptacles with IP68 rating for water and dust. Units are submersible to 6 ft of water when caped or mated and can be molded to multi-conductor type SOOW 600 V cable. Available with 16, 14, 12, and 10 AWG wire cable sizes, connectors are suitable for broad range of power applications.

Advanced Interconnections Corp.
West Warwick, RI 02893
Apr 10, 2008 Designed to meet application-specific requirements, Peel-A-Way® Removable Terminal Carriers come in different shapes, patterns, and pin spacing to suit virtually any through-hole or press-fit application. They feature lightweight, .005 in. thick low-profile insulator for automated pick-and-place. Supplied with Advanced® screw-machined terminals, RoHS-compliant polyimide film carriers can be removed after soldering for complete visibility or left in place for stability.

Waytek Inc.
Chanhassen, MN 55317
Apr 10, 2008 Supplied with Mobile Crimp Tool Kit, crimp tool frame facilitates exchange of snap-in dies and eliminates need for buying multiple tools. Seven snap-in dies work on variety of applications including insulated, non-insulated, heat shrink, and Weather Pack terminals and splices. All dies come standard with interlocking holder and are pinned together so that pieces do not get lost.

Weidmuller, Inc.
Richmond, VA 23236
Apr 08, 2008 Including depot that allows storage of plotter pens directly on machine, MCP Plus Plotter provides custom printing on complete range of MultiCard tags/markers for terminal blocks, wires/cables, and other electrical equipment. Compact and lightweight unit features positioning frame which can hold up to 5 card types at a time. It also comes with universal power pack (110 Vac/240 V, 50-60 Hz), software CD, cables, frame, marking pen, and manuals for both hardware/software.

ERNI Electronics, Inc.
Midlothian, VA 23112
Apr 08, 2008 Including 5-, 6-, and 7-pin versions, Universal Power Module (UPM) connectors supply power in applications in line with industry standard PICMG EXP.0 CompactPCI Express. RoHS compliant units meet requirements for performance grade 1, and are compatible with other 2 mm and DIN 41612 connectors. Featuring pressfit technology, angled male multipoint connectors are designed to supply power to daughter cards, while straight female multipoint connectors are used on backplanes.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Apr 08, 2008 Meeting/exceeding Lucent 640-252-053 and Telcordia GR-326 requirements, Cannon PHD SuperLC fiber optic connector targets military/aerospace, telecom, and industrial data communications applications. Tunable optical cartridge functions as standalone optical element separate from connector housing, and accepts multi-mode or single-mode ferrules. Locking mechanism prevents thermal stress of latch, while crimp termination of cable to rear body ensures quick field repair.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 08, 2008 Available with smooth bore or fully detented interface to provide insertion forces of 2.5 or 4.5 lb, 40 GHz SMPM microminiature RF connectors allow center-to-center spacing of 0.135 in. Available in cable-mount jacks, board-mount receptacles, and with accessories such as adapters and shrouds with range of configurations, 50 W units work with .047 in. semi-rigid and T-flex 405 cable. They can accommodate radial and axial misalignments of 0.010 in. and meet MIL-STD-348A standard.

ERNI Electronics, Inc.
Midlothian, VA 23112
Apr 08, 2008 SMC Board-on-IDC cable connector enables connection between PCB and IDC flat cable to be established using 1 connector. In process, cable is permanently attached to connector, already soldered to the PCB, by means of cable duct, and forms gas-tight connection with IDC contacts. Designed for fully-automatic SMT assembly, system includes black insulating body, high-temperature-resistant thermoplastic housing, preassembled mounting hood, and tape-on-reel packaging.

RADIALL Inc
STRATFORD, CT 06615
Apr 07, 2008 Targeting telecommunications industry, 7-16 Coaxial Flange Receptacle features lightweight material that is corrosion-resistant and colorable to enable color coding. Contact pressure on equipment side is generated by pressure applied by 7-16 plug. When plug is mated to receptacle, tightening torque is diverted by thread system into axial force that is applied to reference plane, equally distributing pressure on both contact junctions.

Alcatel-Lucent
Paris 75008  France
Apr 07, 2008 Alcatel-Lucent 9234 Base Station d2U Distributed is designed to support CDMA2000 1X and 1xEV-DO Revision A services, enabling streaming video, Web browsing, and VoIP. Zero-footprint 3G CDMA/EV-DO system can be deployed in wide array of physical locations such as utility poles, sides of buildings, and tower tops. It separates components into baseband unit and remote radio heads, allowing for various configurations and for different elements to be separated by miles.

Video Products, Inc.
Aurora, OH 44202
Apr 04, 2008 Meeting/exceeding ANSI/TIA/EIA-568-B.2-1 Category 6 and ISO/IEC 11801 Class E requirements, VPI CAT6 bulk cables are backward compatible with Category 5/5e cable standards and support applications utilizing 250 MHz bandwidth. Suitable for 10BASE-T/100BASE-TX and 1000BASE-T Gigabit Ethernet applications, unshielded cables come with stranded or solid conductors, while shielded and plenum CAT6 cables have only solid conductors.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 03, 2008 Able to cut copper and aluminum cables up to 2/0 AWG, 727M Cable Cutter has molded grips with hard underside for strength and soft, slip-resistant, ergonomic outside for comfort. Grip width optimizes load bearing area to facilitate handling, and hot riveted joint provides smooth opening/closing action. Product uses forged steel blanks that are heat-treated and precision-ground for extended life and cutting capability. Black oxide finish provides additional safeguard against rust.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 03, 2008 Designed with 2 die positions, KP1022 Crimper is capable of crimping insulated and uninsulated terminals and splices from 10-22 AWG. Elongated nature of curved handles and double-cushioned grips optimize leverage and operator comfort. Smooth pivot action enables single-handed use, and precision-machined and hardened cutter blades at nose facilitate cutting of copper and aluminum wire.

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
Apr 03, 2008 Available in 15 and 20 A models, Lev-Lok(TM) is suited for high-traffic environments such as universities, hospitals, hotels, and office complexes. System's wiring module, which consists of locking connector and 6 in. wire leads, accepts duplex receptacle's solid brass locking connection pins and, with single clockwise turn, securely locks and latches in place. Suited for dusty construction sites, Lev-Lok module includes factory-installed protective cover.

Thomas & Betts Corp.
Memphis, TN 38125
Apr 02, 2008 Colored UV-stabilized Ty-Rap® cable ties are designed for outdoor applications subject to ultraviolet (UV) ray exposure, which can degrade strength of untreated nylon. UL®-Listed and CSA-certified products will blend in with cabling colors and not stand out where cables are in plain view. In addition to oval-shaped cable tie head, elements of construction include rounded body that does not cut into cables, and ribbed design that minimizes slippage along cable.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Apr 01, 2008 Model 4157-DC is duplex AC/MC connector with cable range from 14/2 to 10/3 metal clad cable and ¾ in. electrical metallic tubing (EMT). Couplings' internal dimension allows conductors to pass through to EMT conduit without damaging conductor insulation. Transition fitting is suited for new construction and retrofit applications in schools and commercial buildings.

Sabritec
Irvine, CA 92614
Apr 01, 2008 Capable of providing low pass filtering and effective insertion loss without use of soldered components, Solderless Filter Connector series uses contact clip to make connection from signal/power contact to capacitor array. Grounding of capacitor to connector body (shell) is achieved via grounding spring, and filtered connectors meet electrical and filtering performance of soldered type filter connectors. Seal allows for water wash immersion of connector in unmated condition.

Richco, Inc.
Morton Grove, IL 60680
Apr 01, 2008 RoHS-compliant WIT-40LAR series eliminates need for multiple parts by incorporating cable tie and holder into one part. Able to be reused multiple times, products press and lock into pre-drilled holes and remove from panel when wings are pinched. Retaining tab secures any unused strap, eliminating need to cut off excess. Measuring 7.677 in. long, series accommodates bundles diameters up to 1.97 in. and offers minimum loop tensile strength of 40 lb.

Del City
Milwaukee, WI 53209
Mar 31, 2008 Ergonomic ratchet crimp tool has 4 crimp stations, ranging from 22-8 gauge, and color-coded crimp nests that help user match correct terminal. Mating mechanism prevents jaw slippage and misalignment, while handle length facilitates crimping process by requiring minimal force application. Release switch near handle operates with one push towards crimp nest. Designed for heat-shrink terminals, tool also accommodates standard insulated terminals.

Samtec, Inc.
New Albany, IN 47151 1147
Mar 27, 2008 Twisted Pair IDC cable assemblies employ 32 AWG 7/40 tinned cable with PVC insulation. Female assembly, Series FFTP, is double-ended with standard notch polarization and mates with .050 in. micro, shrouded, and ejector headers. Male Series FMTP is available double-ended or with transfer end and mates with .050 in. low profile and micro socket strips. Both series are RoHS compliant and available in choice of cable lengths with optional reverse connector on second end.