Pickering Interfaces
Wobum, MA 01801
Aug 11, 2008 Supporting high current and high voltage switching applications, model 40-330 SPST Power Relay Module provides 24 off SPST switches, each capable of switching currents up to 4 A and hot switching voltages up to 250 Vac. Cold switch rating of 1,000 V peak permits unit to be used for high voltage test applications where hot switching is not needed. User connections are provided on 50 way male high voltage D Type connector. Module includes software support for common programming environments.

Omron Scientific Technologies Inc.
Fremont, CA 94555
Apr 23, 2008 Consuming less than 4 W DC power, G7Z Series is designed and insulated to apply up to 160 A using 4-pole parallel connections. Unit provides EN 60947-4-1 certified safety functionality via mirror contact mechanisms that use combination of relay and auxiliary contact blocks. Mounted to DIN track, RoHS-compliant relay offers alternative in applications where bulkier contactors have traditionally been used.

Picker Components Inc.
Carrollton, TX 75006
Feb 21, 2008 Available in top flange, side flange, and plain case mounting configurations, Model PC740 includes silver alloy contacts and heavy swinger wires that go down to contacts to carry current load and minimize heat in springs. Two-pole version is rated 40 A, 250 Vac, while 3-pole version is rated 30 A, 250 Vac. Measuring 55.2 x 52.0 x 38 mm plus mounting tabs, relay is suited for driving motors and actuators, battery chargers, heater elements, industrial controls, and safety circuits.

Omron Electronics LLC
Schaumburg, IL 60173
Nov 09, 2007 Providing up to 40 A switching capacity per pole on NO contact, Model G7Z features resistive load rating of 40 A at 440 Vac for NO contact and 25 A at 440 Vac for NC contact. Space saving unit is offered in 12 or 24 Vdc coils, and maintains dielectric withstand of 4,000 Vac between coil and contacts. Suited for inverter, solar/fuel battery, and Uninterruptible Power Supply applications, it has inductive load rating of 22 A at 440 Vac on NO contact.

Crouzet
Coppell, TX 75019
Oct 10, 2007 RoHS-compliant GN3 series 3-phase and motor reversing solid-state relays are designed for thermal efficiency and noise immunity. Models are suited for various 3-phase motor and heating applications as well as applications switching multiple outputs with single control signal. Supplied in IP20 touch-safe housing, series complies with IEC 62314 (2006-05) and offers built-in transient protection. Various ratings and voltages are available.

Omron Scientific Technologies Inc.
Fremont, CA 94555
Sep 06, 2007 Including 3 models for dc or ac input power for reliable operation in variety of environments, RM-2 resource modules provide centralized location for all connections and convert output of those devices to force-guided relay outputs. Suited for harsh applications, Model RM-2AC-IP comes in rugged metal chassis, while Models RM-2 and RM-2AC feature IP20 rated 100 and 150 mm DIN enclosures, respectively. Models RM-2AC and RM-2AC-IP also include power supply and pair of safety relays.

Weidmuller, Inc.
Richmond, VA 23236
May 16, 2007 Combining base sockets with industrial relays, RIDERSERIES II can switch loads up to 16 A at 24 Vdc or 230 Vac for power or signal switching. Heavy-duty industrial pins nearly eliminate accidental pin bending, while integrated status LEDs and diode circuit protect controllers from inductive kickback damage and facilitate troubleshooting. Able to temporarily or continuously lock contacts closed, test lever allows operator to test output circuit without energizing coil.

Waytek Inc.
Chanhassen, MN 55317
Mar 27, 2007 Power Relay Module contains 2 female fuse positions and one sealed 70 A relay. While one fuse protects relay, other is single-circuit inline fuse. Module is available with or without output connector and works with JCASE cartridge style fuses. Also available, Power Fuse Module holds 2 fuses, each as separate circuits. Silicone seal and removable cover offer weather-tight enclosure for fuse positions.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Nov 09, 2006 Sealed, twin PCB-mount AZ9891H Series incorporates 2 separate coils in DPDT H-Bridge arrangement capable of handling 25 A loads. Built in ISO/TS 16949-certified factory, sub-micro unit is suitable for power windows and doors, sunroofs, seat adjusters, mirror adjusters, and wherever board space is limited.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Oct 09, 2006 Suited for engineers designing HVAC controls, alarm systems, and industrial controls, AZ880 series subminiature power relay is UL rated for 10 A at 250 Vac, 10 A at 30 Vdc, and 1/3 hp at 250 Vac. Relay has power consumption of 200 mW and dialectic strength of 4,000 Vrms (6,000 V surge) from contact to coil. Latching and non-latching versions (single or dual coil), and 1 Form A, 2 Form A or 1 Form A, 1 Form B contact arrangements are available.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Sep 11, 2006 Supplied in 28 x 5 x 15 mm, RoHS-compliant package, AZ6991 has UL/CUR rated switching capacity of 6 A @ 277 Vac and 30 Vdc as well as R300 Pilot Duty rating. Coil voltages are rated from 3-60 Vdc, with nominal sensitivity of 170 mW. Available in 1 Form A or 1 Form C versions, product features 4,000 Vrms contact to coil dielectric strength, 6 kV surge rating, and 8 mm creepage and clearance distances. It is available epoxy-sealed with silver nickel contacts.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Aug 10, 2006 With isolation spacing of 10 mm and dielectric strength of 5,000 Vrms, Series AZ761, AZ762, and AZ743 feature switching capabilities up to 16 A in single pole configuration and 8 A in double pole configuration. AC coil power is 0.76 Va, with DC coil power at 400 mW. Featuring Class F insulation and seated height of 15.7 mm, relays have complete UL, CUR, and VDE approvals, and are suited for HVAC and white goods applications.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jul 31, 2006 Light-weight J115 Series are offered in PC termination, combination PC and QC for contacts, and panel mount style QC for both coil and contacts. Relays include 40 A contacts, 2 hp, and Class F insulation with max coil temp of 140°C. Suited for computer, telecommunications, medical, and motor control applications, series offers dielectric strength coil to contact of 400 Vrms, shock and vibration resistance, and coil voltage from 3-110 Vdc and 12-277 Vac.

TURCK, Inc.
Plymouth, MN 55441
May 05, 2006 As 2-pole changeover contact relay, modular C12 interfacer(TM) provides universal socket to allow input and output relays with various voltages to be positioned on DIN rail and replaced, individually, as needed. Industrial-grade relay has blade terminals with push-to-test and pull-to-lock latches, while built-in surge suppressor eliminates need to specify separate relays for ac and dc applications. Dual-status output indicator uses LED pilot light and mechanical flag.

E-T-A Circuit Breakers
Mount Prospect, IL 60056 6060
Apr 11, 2006 Measuring 30 x 30 x 30 mm, dice-shaped Model E-1048 uses electromechanical relay in combination with blade fuse to provide electronic overcurrent protection in single unit. Remotely controllable, electronic load disconnecting device matches standard 4-pin automotive relay sockets and operates from ambient temperatures of -40 to +185°F without derating. Consuming less than 1 mA, unit is based on power MOSFET that meets EN 61000-6-2 requirements for noise immunity.

Advantech Automation Corp.
Cincinnati, OH 45240
Mar 16, 2006 Modules ADAM-4069 and -5069 satisfy requirements for driving externally controlled devices and have 8 output channels rated 240 Vac @ 5 A, 30 Vdc @ 5 A. Featuring 4 Form A and 4 Form C relays, ADAM-4069 supports Modbus/RTU protocol and ADAM ASCII commands. ADAM-5069 provides jumper setting for output values to clear or keep values when reset. It has 8 LED indicators and 8 Form A relays. When used with selected controllers, unit can provide Modbus/RTU or Modbus/TCP protocol.

Panasonic Electric Works Corporation of America
New Providence, NJ 07974
Jan 19, 2006 Featuring encapsulated contacts, EV 300 A compact power relay achieves 400 Vdc high voltage switching cutoff due to hermetically sealed construction and magnetic arc motion through use of permanent magnet. This 1 Form A relay requires no arc space as arc is not exposed to outside. Contact is hermetically sealed with hydrogen to maintain stable contact resistance, and unit exhibits minimal operating noise, even when breaking larger currents.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Jan 18, 2006 Stand-up, PC-mount Model AZ2501 handles heavy loads up to 13,850 Va, 50 A at 277 Vac, making it suited for applications such as HVAC-R, UPS systems, lighting controls, industrial heating, and spa controls. Unit features dielectric strength of 4,000 Vrms contact to coil and 50 ms pulse to Set or Reset. Optional manual switch and PCB retaining stud are available.

Sensitron Semiconductor
Deer Park, NY 11729
Oct 07, 2005 SSPC Module provides electronic equivalent to electromechanical circuit breaker with isolated control and status. Measuring 1.875 x 1.125 x 0.38 in., this 25 A microcontroller-based Solid State Relay offers integrated current sensing with no derating over full operating temperature. Features include current slew control, built-in R-C filters, repetitive fault handling, and true I2t protection from 32-250 A with nuisance trip suppression.

American Zettler, Inc.
Aliso Viejo, CA 92656 4115
Sep 22, 2005 With seated height under 0.55 in., AZ9481F series is suited for applications where mechanical headroom is limited. It is rated at 16 A, 4,000 VA, has dielectric strength from contact to coil of 2,500 Vrms, and incorporates coil that operates at 128 mW at pull-in. Featuring Quick Connect terminals and PCB terminals, fully sealed and RoHS-compliant series comes standard with Class F insulation system that allows operation in ambient temperatures to 85°C.