Pickering Interfaces
Wobum, MA 01801
Aug 11, 2008 Supporting high current and high voltage switching applications, model 40-330 SPST Power Relay Module provides 24 off SPST switches, each capable of switching currents up to 4 A and hot switching voltages up to 250 Vac. Cold switch rating of 1,000 V peak permits unit to be used for high voltage test applications where hot switching is not needed. User connections are provided on 50 way male high voltage D Type connector. Module includes software support for common programming environments.

Beta Dyne Inc.
Bridgewater, MA 02324
Aug 11, 2008 Suited for wide range of applications such as automotive, avionics, telecom, and ground systems, Model PFL4000 EMI filter is designed to meet filter requirements of conducted emissions per MIL-STD-461E for 5-100 W dc/dc converters. It features 99.5% efficiency, MTBF of 47.6 million hr, 6-sided shielding, and thermally conductive epoxy packaged in 1 x 2 x .5 in. metal case.

TDK Corporation of America
Mount Prospect, IL 60056
Aug 01, 2008 Measuring 1.25 x 1.0 x 0.6 mm, TCM1210U-500-2P wide-band thin-film common mode filter suppresses noise on DisplayPort connections for signal transmission between computers or audiovisual equipment and display monitors. DisplayPort link uses up to 4 lines, each rated for 2.7 Gbit/sec, resulting in total transfer rate of 10.8 Gbit/sec. Unit features 8.0 GHz cutoff frequency, 50 W common mode impedance at 100 MHz, 100 mA rated current, and 10 V rated voltage.

Vicor Corp.
Andover, MA 01810 5424
Jul 31, 2008 Providing EMI filtering and transient protection, M-FIAM9 28 V front-end module meets conducted emission/susceptibility per MIL-STD-461E and input transients per MIL-STD-704A/E/F and MIL-STD-1275A/B/D. With input voltage of 10-36 Vdc and output power up to 500 W, ruggedized unit can be mounted onboard or inboard for height-critical applications. It comes in 2 environmental grades, including -55 to +100ºC operating and -65 to 125ºC storage, with 4 pin and 3 baseplate options.

Harting KGaA
  Germany
Jul 30, 2008 Available in 4 standard filter values from 47-3,900 pF, male and female D-Sub filter adapters provide electronic noise reduction in applications ranging from high-speed digital broadcasting to industrial test equipment. They are suited for both EMI corrections in existing applications or for filter tests during design phase. Adapters complement D-Sub filter SMC connectors as retrofit solution for system protection against electromagnetic radiation without PCB redesigns.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 From 2.42 x 1.92 x 0.65 mm flip-chip package, EMIF06-AUD01F2 implements complete EMI filtering and ESD protection for stereo headset output and external/internal microphones. Audible handset demodulation noise is eliminated by achieving -25 dB attenuation throughout stop-band 800-2,480 MHz using high-density 1.3 nF PZT capacitors on microphone lines. ESD protection is achieved via combination integrated TVS diodes, low-inductance packaging, and Z-R-Z pi-filter topology.

California Micro Devices
Milpitas, CA 95035
Jul 08, 2008 Based on coupled inductor design, Praetorian® III LC filter architecture utilizes 6-pole pi-filter topology and enables design of filters that can fit into small form factor, 0.4 mm pitch uDFN and chip scale packages. Filters, optimized for inductance and capacitance (down to 10 pF), promote attenuation and signal integrity. Products based on this architecture address EMI filter and ESD protection (to 15 kV) requirements found in handset designs.

Fil-Coil Filters
Central Islip, NY 11722
Jun 06, 2008 Mounted through outer wall of shielded enclosure, Series FCP power line penetration filters are RFI-secure and supplied with threaded nipple. Products are supplied with bleeder resistors to prevent shock hazards and can withstand 140% of rated current for 15 min without any deterioration. Providing specified insertion loss of 100 db min over indicated frequency range, series filters from 60-400 Hz with 100 db attenuation from 14 KHz to 10 GHz and 100 KHz to 10GHz.

Fil-Coil Filters
Central Islip, NY 11722
May 16, 2008 Dual and triple circuit power line electronic filters run at operating temperatures from -550 to +850°C; voltage ratings are 115 Vac, 400 Vdc, O-400 Hz. With minimum insertion loss characteristics, MIL-F-15733/75 filters suit variety of noise and interference filter and safety requirements of electro-magnetic compatibility. Also available is single circuit power line filter IAW to MIL-F-15733.

Schaffner EMC, Inc.
Edison, NJ 08837
Apr 23, 2008 Model FN9233E IEC inlet filter includes earth line choke that helps reduce interference signals on ground wire. They are designed for maximum continuous operating voltage of 250 Vac, 50/60 Hz and frequency range of DC to 400 Hz. Also featuring current rating of 1-15 A at 50°C maximum as well as operating temperature range of -25 to +85°C, devices have MTBF of 1,710,000 hr at 40°C/230 V. Units are available in hot inlet versions or low leakage current versions suited for medical applications.

Fil-Coil Filters
Central Islip, NY 11722
Apr 18, 2008 Offering hermetically sealed filter solution, FCL-660 Series RFI/EMC filters are available for 5-300 A circuits. Nosie interference filters are designed for low level interference and are suitable for use in screen rooms, medical apparatus, induction heaters, and other noise generating equipment.

Schurter, Inc.
Santa Rosa, CA 95403
Mar 25, 2008 Series 5003 ECO includes screw mount version for front or rear mounting to chassis as well as snap-in version that features AMP Universal MATE-N-LOK and Molex HCS-125 connectors encased with single stage filter rated up to 15 A at 125 Vdc. EMI filter provides wideband attenuation in frequencies ranging from 100 kHz to 30 MHz. Offered in lightweight and environmentally friendly compact package, dc power entry module is ENEC and cURs approved and complies with IEC/EN 60950 standard.

Schurter, Inc.
Santa Rosa, CA 95403
Feb 26, 2008 Available with current ratings of 20 A or 16 A, depending on attenuation requirements, 5130 ECO IEC Inlet meets demands of IT, medical, and industrial applications. Positive electrical contact of metal flange or snap arms to chassis ensures optimal filtering and shielding. Flange version is available for front or rear mounting with traditional screws and nuts or rivet mounting. For rear mounting only, version is available with pre-formed threaded holes for M3 screws.

STMicroelectronics
Carrollton, TX 75006
Feb 13, 2008 Housed in 0.6 mm high SOT883 package with 1.0 x 0.6 mm footprint, Model EMIF01-1003M3 is designed for single-line applications. Dual-channel Model EMIF02-1003M6 comes in 1.0 x 1.45 mm Micro QFN package with mounted height of 0.55 mm. Both devices achieve 15 kV air discharge and 8 kV contact discharge, in accordance with IEC61000-4-2 specification. When subjected to 15 kV ESD strike, Model EMIF01 delivers 9 V clamping voltage and Model EMIF02 provides 17 V.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 08, 2008 Housed in LLPXX13 leadless package with 0.6 mm profile, VEMI Series comes in 4-, 6-, and 8-channel models with typical cut-off frequencies of 130 and 240 MHz and resistance of 100 W. Compliant with RoHS 2002/95/EC and WEEE 2002/96/EC, filters provide protection in portable electronics for mobile computing, mobile communications, industrial, and medical applications.

TDK Corporation of America
Mount Prospect, IL 60056
Jan 30, 2008 Models ZCAT08V-BK and ZCAT12V-BK counter effects of electromagnetic noise on cables that link various onboard electronic control units. Structure consists of vertically split cylindrical ferrite core with integrated resin case for mounting on cables. Resin case and core material are resistant to heat (-40 to +125°C) and shock. Offering 120 and 140 ohms impedance, respectively, ZCAT08V-BK is 33 mm long with 8 mm ID and 18 mm OD and ZCAT12V-BK is 35 mm long with 27 mm OD and 12 mm OD.

Schaffner EMC, Inc.
Edison, NJ 08837
Jan 23, 2008 Offering high symmetrical and asymmetrical attenuation performance, FN9233 IEC inlet filter series is designed for devices and switching power supply units that require high level of interference suppression. Featuring maximum continuous operating voltage of 250 Vac, 50/60 Hz, frequency range of dc to 400 Hz, and current rating of 1-15 A at 40°C. With choice of output connections and mounting options, series includes snap-in versions and standard or wide mounting flanges.

Schaffner EMC, Inc.
Edison, NJ 08837
Jan 09, 2008 Featuring earth link choke, Model FN9222E targets applications requiring optimized attenuation performance or additional attenuation on ground wire. Unit is suited for max continuous operating voltage of 250 Vac, and is rated from 1-15 A at 50°C with operating frequency of DC-400 Hz and temperature range of -25 to +85°C. Featuring traditional screw mounting, filter supports electrical, household appliance, test and measurement, and electric data processing applications.

California Micro Devices
Milpitas, CA 95035
Dec 14, 2007 Based on Praetorian II architecture, Series CM1692 inductor-capacitor (LC) filters include CM1692-04DE, CM1692-06DE, and CM1692-08DE lead-free models. Units offer high cutoff frequencies of up to 400 MHz, stop band ranging from 800 MHz up to 3 GHz that covers all wireless communication frequencies, 2 nsec rise time, less than -2 dB insertion loss, and ESD protection up to ±15 kV contact discharge per IEC61000-4-2 Level 4 specification.

Spectrum Control, Inc.
Fairview, PA 16415
Sep 07, 2007 Available with M3 x 0.5 feed-thru circuit and M4 x 0.7 Pi circuit, Metric EMI Filters feature current rating of 10 A, voltage rating of 100 Vdc, and dielectric withstanding voltage of 250 Vdc. Units can be mounted in tapped hole or thru-hole and have hex head dimension across flats of 4.0 mm. Designed with resin sealed case, filters are environmentally protected and suited for signal/data lines, industrial controls, telecommunications, and test equipment.