TDK Corporation Launches MAF1005G Series Noise Suppression Filters with Current Rating Up to 1.25 A
The MAF1005G Series Noise Suppression Filters are available in MAF1005GAD251D, MAF1005GAD401D, MAF1005GAD571D and MAF1005GAD701D types with impedance of 250, 400, 570 and 700 Ω at 900 MHz respectively. The units use low-distortion ferrite for suppressing noise at cellular frequencies from 600 MHz to 2.7 GHz. They are offered in IEC 1005 case size with 1.0 mm x 0.5 mm x 0.5 mm dimensions. These...
Read More »
New Model CFO 25 Continuous Filter Operation System Features a Cover with 360 Degrees of Studs
The Model CFO 25 Continuous Filter Operation System is designed for handling materials, such as PE, PP, PS, PC, and ABS. The system can handle up to 0.75 in. of foreign material and up to 10% paper. This CFO 25 unit comes with a robust design that can handle up to 3500 psi and delivers an output up to 3000-7500 lbs/hr. The System is used on contaminants, such as metal, wood, paper, textile fibers...
Read More »
New Ultra-Low Profile RF Filters Use Innovative Machining and Material Optimization Techniques
Reactel’s Ultra-Low Profile RF Filters are designed for portable and aerospace applications where weight and size are significant. The units are offered in package heights as low as 0.125 in. weights as low as 15 g. and provides Qs in frequencies up to 30 GHz. The filters are available in axial or radial pins in flatpack combline and interdigital packages for higher frequency designs.
Read More »
New Membrane Filtration System is Operated in Both High and Low Pressures
Sterlitech’s Dual-Pressure Membrane Filtration System is available in digital or analog models. System is equipped with convertible skid for use in reverse osmosis, osmotically-driven, forward osmosis or membrane distillation processes. Convertible Skid System is suitable for applications such as food processing, chemicals, pharmaceuticals or processing of water and wastewater.
Read More »
Increasing Workplace Safety with Beryllium Medical Surveillance
To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.
Read More »
New ULT 200 Series Filtration System Automatically Adapts to Required Pollutant Capturing
ULT 200 Series Filtration Systems are used for removing laser and soldering fumes, dusts, gases, odors and vapors. The system is offered with foot switch for ON/OFF, extraction hoses of various lengths, Y hose connectors, sockets, cuts or a panel for extraction arm. Unit allows user to assemble hoses with (Ø 50, 75, 80) and features an M12 interface for connecting to devices.
Read More »
Flowrox Geobag Filtration and Dewatering Unit Comes with Packaged Pumping System
Flowrox Geobag™ Filtration and Dewatering Unit consists of container, geotextile bag, slurry pump, chemical dosing pumps, and flocculation reactor module. Unit is suitable for applications such as sewage sludge dewatering, tailings dewatering, filtration and dewatering of clay, sand and fine particles. Geobag features a drain valve that allows closed and clean operation.
Read More »
New B84243* Series EPCOS EMC Filters Can be Operated in 30 mA RCD Environments
TDK’s B84243* Series EPCOS EMC Filters are optimized for motor cable lengths of either up to 25 m (C1) or 50 m (C2) and are designed for rated voltage of 530 V AC. Units are used in frequency converters for drives of elevators, pumps, conveyor systems and HVAC systems. The filters are offered in IP20 protected metal cases ranging from 190 x 40 x 95 mm to 450 x 170 x 230 mm dimensions. Units...
Read More »
Sales of Eriez® Dry Vibrating Magnetic Filters Continue to Rise with Surging Worldwide Lithium Demand
Erie, PA—Eriez® reports a steady escalation in sales of Dry Vibrating Magnetic Filters (DVMFs) which the company says can be attributed mainly to ongoing increased worldwide lithium production, driven by growing demand for lithium-ion batteries. Eriez DVMFs are specifically designed to remove very fine iron-bearing contaminants from hard-to-flow fine powders such as lithium....
Read More »
New AVX MLO Band-Pass Filters Incorporate High-Density Interconnect Technology
New band-pass filters from AVX include patented multilayer-organic (MLO) interconnect technology. They feature a high-dielectric-constant combined with low-loss materials that can be matched to most other organic PCB materials. This allows for increased reliability over standard silicone and ceramic pieces. The filters have an ultralow profile of less than 0.556mm, and can support 18 pass bands...
Read More »
FPBB RAIL Filters Come with OverVoltage Varistor
FPBB RAIL Filters is available in three variations and are designed for currents from 1 A to 16 A with a maximum of 125 / 250 VAC and 250 VDC. These two-stage units are suitable for industrial or machine controls applications. Filters are operated in the range from -40°C to 100°C. Units offer low leakage current feature cage clamp terminals.
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
