Glass Vacuum Filtration System comes with 2L funnel.
Glass Vacuum Filtration System is equipped with PTFE coated stainless steel support screen, and 10L PVC-coated vacuum receiving flask. Unit is suitable for cold filtration applications and offers ground glass joints. Product provides GL14 connections and can accommodate membrane filters of 150 mm diameter. Filtration system is used for rough debris removal and bacterial filtration.
Read More »
Hydrophobic PETE Membrane Vent Filters are suitable for electrical enclosures.
Hydrophobic Polyester Track-Etch Membrane Vent Filters are available in 0.2, 0.4, 1.0, and 1.2µm pore size ratings. Units feature nonwoven polyester support layer and pressure activated adhesives. Products are suitable for passage of air and gases and help to prevent passage of liquid water, particles and microorganisms. Filters offer surface tension >25dynes/cm.
Read More »
AF500 AIR-SCRUB-R™ HEPA Air Filter weighs 33 lbs.
AF500 AIR-SCRUB-R™ Portable HEPA Air Filter features clean filter indicator light and 16 in. diameter inlet. Unit is equipped with ¼-horsepower, 115 VAC variable speed electric motor and comes in UV-resistant polyethylene housing. Suitable for residential, commercial and industrial applications, product comes with two-stage design, pre and secondary filters. Air filter is used to remove...
Read More »
Dyed Polycarbonate Membrane Filters are suitable for optical microscopy studies.
Hydrophilic, polycarbonate track-etch (PCTE) membrane filters are pigmented using black dye to reduce membrane autofluorescence. Units are suitable for fluorescence microscopy analyses. Products are available in gray and black versions. Membrane Filters are ideal for automated fluorescence microscopy.
Read More »
Embedded Systems and Security: Security-First Mindset Drives Both Performance and Profits
To learn more about developing a long term strategy for protecting your systems, download now.
Read More »
Centrifuge Oil Filtration for John Deere
Dieselcraft has developed the OC-20/JD Series Oil Centrifuge for the John Deere 4045 diesel gensets. The OC-20/JD Centrifuge removes 99% dirt and wear particles from the oil flow. Contaminant particles as low as 1 micron are removed by the OC-20, eliminating the wear and tear on close tolerance metal parts. The OC-20/JD Centrifuge removes dirt and wear particles from the oil flow all together....
Read More »
Lee HI-BAR® In-Line Wash Flow Safety Screens Take Filtration to a Higher Level
The Challenge Protecting components from contamination is essential in critical fluid control applications, such as those found in the aerospace, power generation and automotive industries. While many systems are designed to be relatively immune to low levels of small size contaminants, single larger rogue particles can cause blockages which could result in system failure and downtime. The...
Read More »
EVO Line CPL Filters reduce the possibilities of vignetting.
EVO CPL filters are offered in 95 mm and 105 mm sizes with thickness of 7.5mm. Featuring German B270 Schott tempered glass and aluminum construction with knurled grip, units can be mated with EVO aluminum filter holders and are housed in hinged hard, round black case.
Read More »INW-ETF Tunable Filter comes with narrow bandwidths.
INW Electronically Tunable Filter features quick tuning and sharp rejection bands. Unit is suitable for signal analysis, signal discrimination and post-filtering applications. Product provides sub-100uS tuning time greater than 50dB stop band rejection at X band. Filter offers 3dB pass band of less than 200kHz.
Read More »
Diba Filters are suitable for fluidics application.
Offered in PEEK, PTFE and stainless steel materials, Diba Filters are used to remove particulate sizes from 5μ up to 250μ. Units are available in In-Line and bottle straw filters configurations. In-Line filters come in male to female and female to female with different port sizes. Bottle Straw filters allow the user to aspirate maximum amount of liquid out of the container. Suitable for...
Read More »
Membrane Biofouling Mitigation through Applying Electric Potential in the CF016 Cell
Membrane filtration is an effective way to remove pollutants and microorganisms from water and wastewater. However, membrane fouling lowers efficiency over time when considering rejection values and water flux. Fouling is typically biological or particulate; fouling rate is a function of the membrane pore size relative to the size of the foulants and also the interactions between the membrane and...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
