Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Aug 20, 2008 Intended for quick mounting in panel openings, SRB Slide-In Power Line Filters are available with 33-1,000 pF capacitance range. Featuring IEC 320 male power connection and measuring 0.96 in. deep, shielded filters are suited for space-constrained communications, computer and consumer electronics, industrial and commercial, instrumentation, and medical equipment applications. UL Recognized, CSA Certified, and VDE approved filters are rated up to 15 A at 250 Vac, 50/60 Hz.

Schaffner EMC, Inc.
Edison, NJ 08837
Jul 22, 2008 ECOsine(TM) load-applied passive harmonic filters are suited for 3-phase power electronics with 6-pulse rectifier front ends. With total harmonic current distortion of under 5%, products guarantee compliance with IEEE 519 and other international power quality standards. Two ranges are available, one for 380-500 V, 50 Hz grids (FN 3410 series) and one for 440-480 V, 60 Hz systems (FN 3412 series). Plug-and-play concept facilitates installation, wiring, and commissioning.

Fil-Coil Filters
Central Islip, NY 11722
Jun 06, 2008 Mounted through outer wall of shielded enclosure, Series FCP power line penetration filters are RFI-secure and supplied with threaded nipple. Products are supplied with bleeder resistors to prevent shock hazards and can withstand 140% of rated current for 15 min without any deterioration. Providing specified insertion loss of 100 db min over indicated frequency range, series filters from 60-400 Hz with 100 db attenuation from 14 KHz to 10 GHz and 100 KHz to 10GHz.

Schurter, Inc.
Santa Rosa, CA 95403
May 06, 2008 Particularly suited for applications requiring increased attenuation of asymmetric disturbances, FMEB and FMEC series have current rating of 30 A @ 80 Vdc and aluminum housing that is potted and has metal flanges for secure mounting to chassis. Single polarity FMEB filter is designed for max operating voltage of 80 Vdc, while FMEC series offers connections for 2 polarities for 80+ Vdc max. Input side is equipped with screw clamps, and output has 6.3 x 0.8 mm quick connect terminals.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
May 02, 2008 Designed for mounting on DIN rails, STFE Elite Series protects against voltage transients and surges that may impair operation of industrial and machine tool equipment. Combination of hybrid-clamping network and Active Tracking® Filter technology allows products to continuously track input ac power line and respond instantly to extraneous high-frequency noise and high-voltage transients. Filters have UL-Listed surge current capacity of 45,000 A.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 20, 2008 CORCOM single- and 3-phase filters, offered in variety of series, meet performance requirements for conducted noise and are designed for high-current (30-400 A) applications. Offering elevated insertion loss over 10 kHz to 30 MHz range, products aid in immunity/susceptibility compliance. All BCF, FCD, and CFN series filters are delta wound and offer voltage ratings of 277/480 VAC. Model 60VS6 of S series single-phase power line filter is rated 250 Vac.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Feb 05, 2008 Available with current ratings of 10, 15, and 20 A, chassis-mount RK series uses single-stage filtering to achieve differential mode performance required in industrial machinery in noisy environments. Leakage current of 0.16 mA @ 120 Vac/60 Hz also makes these filters suited for portable equipment. Rated for voltages up to 250 Vac, products are designed for global applications. They are UL-Recognized, CSA-Certified, and VDE-Approved.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Dec 11, 2007 Model 60VS6 60 A filter combines common mode interference rejection with circuitry to reduce differential mode noise and transients. Measuring 7.2 x 3.08 x 2.28 in., multistage package includes terminals for line and load connections. Filter is designed for use in 120 Vac 60 Hz/250 Vac 50 Hz applications such as industrial frequency inverters, motor drives, and switch-mode power supplies. It features UL Recognition, CSA Certification, and VDE Approval.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Nov 26, 2007 CORCOM CFN series universal, 3-phase power line filters help electrical equipment comply with EMI requirements as well as aid in immunity and susceptibility compliance. Designed for delta wiring, UL recognized 400 CFN filters are rated for continuous operation at 400 A and 277/480 V 50/60 Hz. Maximum leakage current at 10% unsymmetrical mains line to ground is 5.0 mA at 120 Vac/60 Hz and 9.6 mA at 277 Vac/50 Hz.

Sola/Hevi-Duty, EGS Electrical Group
Rosemont, IL 60018
Mar 20, 2007 Designed to safeguard equipment against damaging low-energy voltage transients and high-frequency noise, STF Series of Active Tracking® Filters continuously track input ac power line at all locations on sinewave and instantaneously counter noise. By reducing normal mode transients to ±5 V and absorbing large bandwidths of noise, they recreate well-regulated sinusoidal waveform. Units come in 1- and 3-phase configurations with input voltage of 120, 240, and 480 Vac at 50/60 Hz.

American Power Conversion
West Kingston, RI 02892
Jan 11, 2007 APC AV C3 Power Filter delivers surge protection and isolated noise filtering to help eliminate power anomalies such as surges, spikes, or EMI/RFI that threaten AV component hardware, signal integrity, and system availability. Featuring 8 outlets, unit offers surge protection efficiency with less than 85 V let-through rating. Gold Coax connections and phone jack surge protection provide additional safeguard for incoming signals on dataline.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Aug 08, 2006 CORCOM SRB series shielded line filter is rated for up to 15 A at 250 Vac (10 A VDE). Configurations are available in unfiltered versions, or designers can select from up to 8 capacitance values for different application requirements. Filter can be specified for snap-in or flange/screw mounting. Termination options include FASTON terminals, wire leads, or pin termination.

Schurter, Inc.
Santa Rosa, CA 95403
Mar 21, 2006 Series 5120 Filtered Power Entry Module is dimensioned as 1-stage filter for 1, 2, 4, 6, 10 and 15 A rated currents. Attenuation range is 100 kHz to 30 MHz range with leakage current of less than 0.5 mA for standard filter and less than 5 µA for medical filters. Metal flange provides large contact area for optimal shielding at panel opening. Series fulfills requirements of IEC/EN 60950 and UL 1950 for use in IT equipment and IEC/EN 60601 and UL 544 for use in medical equipment.

Curtis Industries
Milwaukee, WI 53234
Jan 30, 2006 Intended for applications from 380-600 Vac and up to 600 A, 3-Phase AC Power Line Filters are suitable for both 50 and 60 Hz power and will support Delta and Wye connected loads. RoHS-compliant units offer both wire leads and terminals for installation. Applications include variable frequency drives, facility filters, uninterruptible power supplies, power conditioning, laser welders, and industrial automation equipment.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 13, 2006 Suited for 4-wire WYE applications with balanced and unbalanced 3-phase loads from 20-60 A, Corcom A Series provides common mode and differential mode suppression from 50 kHz to 30 MHz. Corcom ADT Series is available with common or differential mode coils for Delta applications from 63-200 A. For very noisy Delta applications, 6-50 A Series FCD attenuates conducted interference at low and high frequency ranges, protecting components from RF noise on AC power line.

Interpower Corporation
Oskaloosa, IA 52577-0115
Nov 09, 2005 Filtered C20 Inlet Power Entry modules are intended for computer, medical, general-purpose, and custom indoor type equipment applications that benefit from use of one component that provides filtering and ac power entry for detachable C19 cordsets. Configured with IEC 60320-1-1 C20 inlet and filter, products carry max rating of 20 A @ 250 Vac. Features include screw-mount, nickel-plated, shielded enclosure; 0.250 in. quick disconnect terminals; and RoHS-compliant construction.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 14, 2005 With max current ratings from 3–30 A, CORCOM EMC series addresses need for additional differential mode attenuation in lower frequency range. Filters help reduce conducted noise to acceptable limits for equipment that must comply with requirements of CISPR in Europe as well as FCC specifications in United States. UL/CSA/VDE-approved series is available with ¼ in. FASTON terminals, wire leads, or stud terminals.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 07, 2004 CORCOM EJT series 2-stage inlet filter utilizes IEC320 input connectors with maximum rating of 20 A. It can attenuate up to 14 db in common mode and 23 dB in differential mode @ 1 GHz. Available with ¼ in. FASTON terminals or wire leads in flange mount configuration, series carries UL/CSA/VDE agency approvals. It can be used in networking, telecom/datacom, and test and measurement equipment.

Schurter, Inc.
Petaluma, CA 94975
Nov 26, 2003 Snap-in, Model C20F can be used in power supplies rated up to 20 A at 125 V and 16 A at 250 V. AC inlet is designed according to IEC 320-1, type C20, and is combined with standard or medical grade filter. Bulky wires between connector and filter are eliminated, and direct path to ground is achieved. Typical surge withstand is greater than 2.5 kV, L-N. Unit is suited for power supplies and distribution units with power ratings up to 3,500 W.

Radius Power, Inc.
Orange, CA 92867
Nov 10, 2003 EMC Series RP400 eliminates equipment and mains-borne electromagnetic interferences. It features universal input up to 480 Vac and Y configuration, which incorporates filters on all 3 phases plus neutral. Series includes 11 models ranging from 15–300 A/phase. Each is CSA/UL and EN approved for input voltages up to 480 Vac, meeting most ac input line requirements. Applications include industrial and medical equipment, factory automation, and welding equipment.