Altair Engineering, Inc.
Troy, MI 48084
May 29, 2008 Available in 4 pendant models and 1 table lamp model, Designer Series combines LEDs with metals, acrylic, and glass. Luminaires feature outputs from 600-1,000 lumens, color temperature of 4,200 K, and CRI indexes above 90, while consuming 10-18 W of electricity.

Altair Engineering, Inc.
Troy, MI 48084
May 29, 2008 Available in color temperatures ranging from 3,500-5,000 K, MK1 LED Tubes run directly from 110 Vac and can operate in existing fluorescent fixtures, without modifications to fixtures or ballasts. Solid-state units are mercury-free and available with variety of optical diffusion options.

LEDtronics, Inc.
Torrance, CA 90505
May 29, 2008 Operating on 3 replaceable AAA-cell-type alkaline batteries, Micro High-Power LED Flashlight has 1 W, 80-lumen LED chip that emits over 4,300 end ftc of bright Cool White (8,000 K) light. Measuring 4.5 in. long and over 1 in. wide, it weighs 3.5 oz without batteries and 4.8 oz with 3 AAA batteries. Product features push-button switch in back of unit to operate LED light, and Focusable Lens with narrow- and wide-beam lens design that allows continuous varying of light beam width.

Lighting Products Div., Welch Allyn, Inc.
Skaneateles Falls, NY 13153 0187
May 28, 2008 Solarc® Lamp produces intense, elliptically focused light in UVA and blue, 320-500 nm range, making them suitable for spot and fiber illumination. Design allows system integrators to incorporate lamp into compact devices and minimize energy use. Designed for medical devices, spectrophotometers, and photo-activation, lamp can be customized according to user's particular applications.

Chloride Systems
Burgaw, NC 28425
May 28, 2008 Designed with wall mount profile and numerous finishes that fit any architectural space, indoors and out, Diskuss lighting features white LEDs with custom reflector. Housing is constructed of die-cast aluminum with polycarbonate lens and is fully gasketed. Suited for use as emergency lighting unit, it has 120/277 dual voltage input with surge protection and Intelli-Charge for self-diagnostics. Self-testing option satisfies monthly periodic testing requirements in NFPA 101 and IBC.

OSRAM Opto Semiconductors GmbH
Regensburg D-93049  Germany
May 27, 2008 Measuring 0.6 mm high, RGB MicroSIDELED® is suited for use inside in-coupling light guides used to backlight thin displays such as mobile phones and laptop LCDs. With 3 individual color chips, it delivers more than 100% of NTSC on screen. LED features high efficiency green delivering 1,000 mcd at 20 mA with power efficiency of 50 lumens/W. With package size of 5.0 x 1.4 x 0.6 mm, unit offers thermal resistance as each chip has its own thermal contact lead.

Amerlux Lighting Solutions
Fairfield, NJ 07004-2527
May 27, 2008 Delivering high performance lighting with color temperatures similar to that of incandescent, Cylindrix II LED can be track, canopy, or busway mounted. Life at 70% of initial lumen output is rated at 50,000 hr. Construction includes die-cast lens bezel, lamp, and ballast housing along with die-cast aluminum heat sink with machined face. Designed with architectural look, units feature lockable vertical tilt (0-90°) and 360° rotation for precise aiming.

OSRAM Opto Semiconductors GmbH
Regensburg D-93049  Germany
May 27, 2008 Suited for in-coupling into light guides as thin as 2 mm, Ceramos(TM) Reflector LED is used for backlighting 5-20 in. LCDs used in high ambient light conditions. ThinGaN® LED technology allows operation at optical efficiency of 70 lumens/W at 80 mA. With 50,000 hr life and up to 150°C operating temperature, unit comes in 2.3 x 3.2 x 0.8 mm SMD ceramic package. Mercury-free and RoHS-compliant CERAMOS(TM) can also be used for camera flash and strobe lighting.

Kim Lighting
City of Industry, CA 91749
May 23, 2008 Able to withstand outdoor environments, Lightvault LED and Minivault LED series luminaires produce low-heat output that enables use in pedestrian-accessible areas. Lightvault LED Series, offered with spot or narrow flood distribution patterns, brings consistency to in-grade fixtures with 18 W LED super bright white technology. For accenting small elements or larger vertical surfaces, Minivault LED Series offers spot or narrow/wide flood distribution and comes in 5, 6, or 15 W modules.

NTE Electronics, Inc.
Bloomfield, NJ 07003
May 23, 2008 Available in blue, green, red, white, amber, and red/white/blue colors, LED tubing contains 15 bright LEDs that are encased in flexible clear encapsulate. Measuring approximately 1 ft long, up to 15 individual tubes can be connected in series and powered by one 12 Vdc power supply. Available accessories include multi-strip surface mount connector, surface mount multi-strip L connector, rotatable mounting clip, multi-strip electrical connector, and power supply adapter.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
May 21, 2008 Rated for NEC Class I Division 2 atmospheres, RigMaster(TM) provides dependable source of illumination for offshore and land-based drilling rigs. Metallic fixture features impact-resistant lens and corrosion-resistant aluminum housing that withstands extended exposure to caustic chemicals, UV rays, and driving vibrations. To protect personnel and equipment during power interruption, product offers instant-on capabilities and optional emergency battery pack.

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
May 20, 2008 Designed for installation in enclosed areas, Compact Fluorescent Ceiling Lampholder (Cat No. 9860) provides safe, energy-efficient lighting while complying with NFPA 70, NEC Section 410.16 fire safety standards. It uses 13 W GU24 bi-pin bulb that lasts over 10,000 hr and is designed for use with any standard, non-illuminated wall switch. Available with or without 13 W bulb and lamp guard, lampholder offers pigtail leads and knockout holes to accommodate multiple box configurations.

LEDtronics, Inc.
Torrance, CA 90505
May 19, 2008 Flame Tip LED Chandelier Bulbs (DEC02-B11E25 series) are comprised of LED bulb in flame-tip-shaped, UV-protected plastic lens covering. Suited for any situation that accepts 26 mm Edison screw base attachments, products can directly replace 20-26 W standard-base incandescent bulbs and offer lifespan of up to 50,000 hr. Products are resistant to shock and vibrations as well as frequent switching, and will not burn out from being switched on and off.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
May 15, 2008 Suited for use with most Building Management Systems, ROVR(TM) Ballasts come in 1-lamp, 54 W model for T5 fluorescent applications, as well as 1- and 2-lamp models supporting 17, 25, or 32 W T8 fluorescent applications. All feature IntelliVolt® multiple voltage technology and continuous dimming from 100% to 3%. Digital Addressable Lighting Interface enables 2-way communications with individual lighting fixtures and allows users to set up various lighting configurations.

Optek Technology, Inc.
Carrollton, TX 75006-6905
May 13, 2008 RoHS-compliant OPA80 and OPA83 Series near-infrared light sources are available with ring sizes from 0.625 in. ID/1.25 in. OD to 1.25 in. ID/2.25 in. OD. Typical forward voltage is 1.35 VF, reverse voltage per emitter is 2.0 V, with continuous forward current of 50 mA and peak pulsed forward current of 1.0 A at 1% duty cycle. Series OPA80 12 V light ring comes with ambient light sensor to minimize current consumption, while Series OPA83 5 V light ring comes without sensor.

Welch-Allyn Lighting
Skaneateles Falls, NY 13153
May 09, 2008 Long-life replacement halogen reading lamp, part number 998502-18, is FAA-PMA approved for Airbus models A319, A320, A321, A330 and A340. Lamp lifetime is rated at 5,100 hours, helping to reduce maintenance, while providing high-brightness, high-quality output.

Omega Engineering, Inc.
Stamford, CT 06907
May 09, 2008 Featuring red LED display window, G3 Big Flexible Display connects directly to RS485 port of G3-series HMI. Designed by using 32 display boards in 8-column by 4-row configuration that displays text and graphical information to entire plant floor, unit is suited for plastics, paper, water treatment, and asphalt manufacturing industries. It features field-replaceable display boards, flexible eyebolt mounting, optional NEMA 4 cooling kit, and universal ac power.

Global Lighting Technologies Inc.
Brecksville, OH 44141
May 07, 2008 Designed for portable devices, mobile phones, laptop and desktop LCDs, keypads, and keyboards, Microlens(TM) Light Guides feature MicroLens(TM) light extraction technology, which reduces number of LEDs required. They provide bright, uniform light in thin form factor with no hot spots or dark areas. Light is extracted precisely where needed, such as around thru-holes for keypads, and devices can backlight LCD displays in sizes from 0.25-50 in. diagonal.

Eye Lighting International
Mentor, OH 44060
May 06, 2008 Designed with PTFE coating to prevent shattering of outer bulb jacket glass, EYE Shatterproof Metal Halide lamps are suited for food processing, food warehouse, grocery, and other facilities where reduced potential for glass shard related injuries or contamination is critical. Available in 250 or 400 W versions, Multi-Metal(TM) Premium Universal Mogul Base operates on existing metal halide systems, while ANSI O-rated Multi-Metal Ignitek(TM) 360 W model operates on 400 W open fixtures.

Shat-R-Shield, Inc.
Salisbury, NC 28147
May 02, 2008 Offered in T12 and T8 sizes, Luna Glow Sleeves feature translucent, tubular design that slips over existing fluorescent lamp. Units are held in place with end caps and soak up energy from powered lamp. If lights go out, sleeves immediately activate and provide stored photoluminescent illumination. Sleeves require no wiring, tools, batteries, or maintenance. With automatic activation, lighting is suited for hallways, exit stairs, elevators, and subway tunnels.