Fairchild Semiconductor    San Jose, CA 95134
Dec 08, 2005 Housed in 28-pin SSOP package, Model FMS6501 integrates analog switch capability, input clamps, bias circuitry, and cable drivers into one device. It provides 12 inputs, each of which may be switched to any of 9 outputs. Device accommodates SD, PS, HD, and 1080p video signals while offering selectable 6, 7, 8, or 9 dB integrated cable drivers capable of driving dual video loads. Suited for consumer video applications, unit optimizes system power using disable feature.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Dec 08, 2005 Available with empty housing or complete with desired switches or pilot lights, Operator Control Stations feature 1-5 positions and wire entry through top or bottom. They are made of self-extinguishing ABS plastic and come in either yellow or white. Complete station includes enclosure, switch and legend holder, and STOP legend plate. Labeling accessory can be pre-printed to meet customer requirements.

Powerstax plc    Farnborough, Hants GU14 0NR  United Kingdom
Dec 07, 2005 Offered in 46,000+ possible output configurations, A2000 series configurable AC-DC power supplies employ modular construction and feature up to 12 isolated and adjustable outputs with total power up to 2,000 W. Products, supplied in 2U-high, 19 in. rack-mount package, provide regulated single or multi-output DC supplies from universal mains supply of 90-253 Vac. Additional features include zero load operation and fully floating outputs with standard ranges from 1.45-28 V.

Cooper Bussmann    Ellisville, MO 63021
Dec 07, 2005 UL listed to 600 Vac/dc, Limitron® DCM Fuses feature interrupting ratings of 100,000 A for ac applications and 50,000 A for dc. Developers of solar photovoltaic systems can utilize fuses to comply with NEC® 690.9(D) which requires that photovoltaic source circuits utilize overcurrent devices listed for dc circuits and have appropriate voltage and interrupting ratings. Additional applications include traction/mass transit auxiliary circuits and alternative energy sources.

Cooper Bussmann    Ellisville, MO 63021
Dec 07, 2005 Lead- and cadmium-free, dual-indication Series NH fuses meet stringent environmental standards worldwide. They provide visual indication as well as ability to actuate micro-switches for remote indication of operation. Units feature 400 and 500 Vac rated voltages, interrupting rating of 120 kA, operating frequency of 45-62 Hz, and silver-plated full contact blades.

Streamlight, Inc.    Eagleville, PA 19403
Dec 07, 2005 Made from aircraft-grade machined aluminum, Twin-Task® 3C Laser Combo Light features 5 white LEDs that last for 100,000 hours, Xenon bulb that can be adjusted for spot-to-flood focus, and pre-focused laser cartridge. It offers push-button, 3-position lighting, including laser only, laser/xenon bulb, or LED only. Laser pointer provides range of 100 ft in laser/xenon position and 100 yd in laser only mode. Water-resistant flashlight is powered by 3 C batteries.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Dec 06, 2005 Available in MSOP-8 micro-package, XTR117 offers over-scale and noise-resistant signaling with 250 µA max power consumption. Product has operating voltage from 7.5-40 V and is tolerant of power surges to 50 V. I_out/I_in transfer function of x100 can be created for voltage output sensor conditioning circuits. Along with 4-20 mA output scaling, transmitter offers 3.75 mA @ 5 V (sub-regulated) available for external sensor conditioning circuitry power.

BI Technologies Corp.    Fullerton, CA 92835-1051
Dec 06, 2005 With 1.380 x 2.230 in. footprint and .200 in. board mounted profile, Series 7720 replaces up to 10 TO-220 or TO-247 discrete power semiconductors required to achieve power factor correction in conventional power supply design. Operating temperature is -40 to +125°C. Offering correction to near unity power factor and better than 95% efficiency, PFC evaluation board accepts 85-265 Vrms input voltage at 50-60 Hz, and handles up to 3 kW of power with cooled heatsink.

Waytek Inc.    Chanhassen, MN 55317
Dec 06, 2005 Pressmaster self-adjusting cut and strip tool, Stock No. 555, can be used on over 90% of wires without requiring adjustment. It will cut and strip 34-8 gauge wire. Also available, Stock No. 556 heavy-duty cable stripper handles cables of all insulation types. Tool handles cable up to 1.57 in. and insulation thickness to 0.18 in. Used for removing insulation from copper and fiber optic cables, Stock No. 557 handles cable up to 0.43 in. and insulation thickness to 0.04 in.

Wall Industries, Inc.    Exeter, NH 03833 4556
Dec 06, 2005 Housed in SIP package measuring 0.86 x 0.36 x .044 in., LANEW Series provides 2:1 input ranges of 4.5-9, 9-18, 18-36, or 36-75 V and delivers outputs of 3.3, 5, 9, 12, or 15 V. Converters include remote on/off, ±1% voltage accuracy, line/load regulation, low ripple and noise of 50 mV p-p, continuous short-circuit protection with auto recovery, and 1 kVdc I/O isolation. They provide up to 2 W of power with no derating across temperature range of -40 to +85°C.

LEVITON    Melville, NY 11747
Dec 06, 2005 Pre-wired at factory, Hospital Grade Models 8200-L and 8300-L include three 6 in. No. 12 AWG THHN wire leads, locked-in wrap around strap, dual drive pins, die cast center bushing, and triple-wipe brass T contacts. Receptacle bodies and covers are impact-resistant thermoplastic and come in 7 faceplate colors. Available in 15 or 20 A straight blade models, with 2-pole, 3-wire grounding, units resist impact, cracking, and harsh chemicals.

Greenwood Electronic Components Ltd    Mortimer, Reading, Berkshire RG7 3UD  United Kingdom
Dec 05, 2005 Separable circuit board jack, Trompeter 75 Ohm Model UCBJSE20F sends high-frequency signals directly from edge of PCB through motherboard into coax cable. Two-piece design consists of edge-mounted connector mounted to daughter board, and BNC body mounted over hole in motherboard. Edge mounted connector can be mated and de-mated through hole, allowing hot-swap interconnections without removing cable from motherboard. Return loss values are better than -25 dB up through 3 GHz.

Cables To Go    Moraine, OH 45439
Dec 02, 2005 Consisting of 2 Runners(TM) and selection of 8 BreakAway(TM) termination jumpers, RapidRun(TM) can handle UXGA, RGBHV, component, composite, and S-video along with left and right audio or S/PDIF digital audio signals in runs from 15-150 ft. Connector system allows Runner base cable to be pulled through ¾ in. conduit with up to 90° sweep. AnyAngle(TM) Locking connector enables termination for wall plate or flying-lead BreakAway applications.

RF Industries    San Diego, CA 92126 4202
Dec 02, 2005 Designed for use with Andrew Cinta® cables, Connectors include N-Type, TNC, BNC, 7/16 DIN, UHF, Mini-UHF, and miniature units, as well as SMA, MCX, MMCX, SMB, SSMB, and MC Card models. Reverse polarity N-type, TNC, BNC, SMA, MMCX are available for Wi-Fi and Broadband applications. Offering crimp or clamp attachments, connectors are available with silver, gold, or nickel-plated components, Teflon® dielectric, and gold or silver-plated contacts.

Zippertubing Co.    Los Angeles, CA 90061 0129
Dec 02, 2005 Designed for moderate to severe temperature heat barrier applications, Heat Reflective Products combine aluminized fiberglass or aluminized silicone jacketing used in conjunction with pressure-sensitive adhesive closure system, stainless steel snaps, high-temperature hook and loop, or Teflon® closure system. Available in sizes from 3.8 in. dia, products provide protection for both flat and round cable bundles in automotive, truck, bus, and aerospace markets.

Panasonic Electric Works Corporation of America    New Providence, NJ 07974
Dec 02, 2005 Complying with EN50205 Type A, 4-pole SFS features forcibly guided contacts, built-in LED indicator, and 40 x 13 x 24 mm profile. Safety features include 8 ms max response time and min shock resistance of 200 m/s². Available in 2a2b, 3a1b, 4a2b, 5a1b, and 3a3b contact arrangements, relay suits applications such as machine tools, elevator/escalator control, factory automation, and automotive manufacturing lines. PC board sockets are available.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 01, 2005 Sta-Kon Sta-Org(TM) Terminal and Splice Organizer Kit contains vinyl ring terminals in 12-10 AWG and 18-14 AWG sizes, vinyl butt splices in 12-10 AWG and 18-14 AWG sizes, and vinyl fork terminals in 12-10 AWG and 18-14 sizes. Measuring 6½ in. high x 3 in. in diameter, nylon drawer case features 6 clear lidded canisters and hardware to mount it on bench.

TransEra Electronics Inc.    Waterloo, ON N2V 1Y9  Canada
Dec 01, 2005 Featuring 0.906 x 0.866 in. footprint, mini-line series epoxy encapsulated power transformers help save space on circuit boards and equipment housings. Products, available from 0.08-0.5 VA, are resistant to heat, humidity/moisture, and shock/vibration. They cover commonly used primary and secondary voltages and meet UL/CSA requirements for Class 2 power transformers. Product line also includes 0.472 in. high, 0.935 oz model.

Conntrol International Inc.    Putnam, CT 06260 0645
Dec 01, 2005 Suited for wet, oily, and dirty environments, Series 400 is equipped with skid-resistant elastomeric base pad, and foot rest that lets users slide foot sideways to step on nickel-plated steel pedal. Switch has electrostatically coated black housing and no external springs. Measuring 7¼ x 4¾ x 1½ in., UL-CSA listed unit is sealed to IP68/NEMA 4X, 6P, 12, and 13 ratings.

Spectronics Corp.    Westbury, NY 11590
Dec 01, 2005 Spectroline® 11SC-1 and 11SC-2 are short wave, mercury-vapor discharge lamps made of double-bore quartz material with both electrodes at one end. Measuring 5 in. long, Model 11SC-1 has 2 1/8 in. lighted length tube and delivers average 254 nm intensity of 4,500 µW/cm² at 1 in. Measuring 3½ in. long, Model 11SC-2 features ¾ in. lighted tube and provides avergage 254 nm intensity of 2,000 µW/cm² at 1 in. Both are suited for spectroscopy, chromatography, and photometry.