Lighthouse Technologies Limited    Shatin   Hong Kong (prc)
Aug 02, 2011 VideoBlades(TM) 12 LED display comes in SkyRoll(TM) and GroundRoll(TM) formats, which can be deployed by rolling up/down from rotating structure. Providing 12.5 mm pixel pitch, modularity allows formation of large-scale screens limited in size only by application requirements. Blades - used in groups or singly as set lighting fixtures and scenic elements - are all operated from same control and distribution system. Also, all signal and power interfaces to each Blade travel through one connector.

Besa Lighting Co., Inc.    Blacklick, OH 43004
Aug 01, 2011 Featuring 8 ft of monorail plus LED power supply, 12 V LED Monorail Kits support up to 9 LED lights, at up to 6 W each, and are dimmable. Power supply does away with bulky surface transformers or remote transformers, and instead uses small, no-load 60 W electronic transformer that fits into junction box. Available in bronze or satin nickel finish, monorail kits include all required support and mounting hardware.

Schréder Lighting LLC    Elk Grove Village, IL 60007
Aug 01, 2011 With onboard metering chipset, Owlet(TM) Intelligent Street and Area Lighting Control System monitors and reports power usage with ±2% accuracy. Telemanagement system controls, meters, and manages outdoor lighting for major roadways, city streets, and other large public lighting applications. Each light point can be switched on or off, or dimmed at any time. Operating status, energy consumption, and possible failures are reported and stored in database with time stamp and geographical location.

Dawn VME Products    Fremont, CA 94539
Aug 01, 2011 With VITA(TM) 62 power connector pin-out and full OpenVPX support, PSC-6234 comes in plug-in or bulkhead mounted models available for air- and conduction-cooled configurations. Six-channel design provides up to 400 W output at 28 or 48 V input on 1 in. pitch, and front I/O panel includes LED status indicator, USB port, and VBAT battery access. Shock and vibration compliant per MIL-STD-810F, product integrates RuSH(TM) Rugged System Health Monitor interfaced to OpenVPX management plane.

Amphenol Industrial Operations    Sidney, NY 13838
Aug 01, 2011 Providing power from wireless, mast-mounted base station to remote radio head, Amphe-BTS features 360° EMI shielding with grounding fingers and utilizes bayonet locking mechanism for vibration/shock resistance. Receptacle has crimp contacts and plug has screw termination contacts for field installation. Circular connector, based on MIL-C-26482 series 2, features cable sealing range of 7-18 mm and is available in 2-way 48 Vdc, 2-way reverse gender 48 Vdc, and 3-way 400 Vdc/250 Vac configurations.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Jul 29, 2011 Supplied in 6-pin, 1 x 1.5 x 0.6 mm SON package, TPS62730 extends battery run-time in ultra low power (ULP) wireless and MSP430(TM) MCU-based applications. This 3 MHz, 100 mA synchronous step-down DC/DC converter leverages DCS-Control(TM) technology, has operating current of 25 µA, and achieves 95% conversion efficiency. Able to reduce current consumption drawn from battery in transmit and receive modes, product also integrates bypass switch that consumes 30 nA for sleep and low power modes.

Adalet    Cleveland, OH 44135 3301
Jul 28, 2011 Designed for use in Class I, Div 2, Groups BCD and U.S. Zone 2 areas such as refineries and petrochemical installations, pre-wired Panelboards are factory sealed from the circuit breakers inside cast aluminum explosionproof enclosure to main distribution block and branch terminals housed in IP66/NEMA4X stainless steel enclosure. Units are equipped with padlockable external operating handles, copper bus, isolated neutral and ground bar, and GFI or EPF breakers.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jul 28, 2011 As multi-output LED drivers for LCD backlighting, A8502 and A8514 integrate current-mode boost converter with internal power switch and multiple current sinks. LED sinks can be paralleled together to achieve higher LED currents. Operating from single power supply from 5-40 V, ICs can optionally drive external PMOS to disconnect input supply from system in case of fault. Both products offer diverse protection features, PWM switching frequency of greater than 2 MHz, and synchronization pin.

DDP Supply    El Segundo, CA 90245
Jul 28, 2011 Incorporating secondary optics, WashGrazeLV allows lighting designers to select up to 6 beam angles from 16-120° and 6 color temperatures from 2,700-6,300 K to illuminate or accent any architectural lighting application. Unit operates from 120-277 Vac without remote drivers, and consumes 17 W/ft while providing 850 lumens/ft and efficacy of 50 lumens/W. Available in 1, 2, 3, and 4 ft lengths, lighting fixture is IP66-rated for wet locations and suited for outdoor lighting effects.

Pickering Electronics    Clacton CO15 4NL  United Kingdom
Jul 28, 2011 Occupying 0.15 x 0.4 in. board area, 2-pole Single-in-Line (SIL) 117 series relay is constructed using SoftCentre(TM) technology with integral magnetic screen. This ensures relays exhibit optimal reliability and no magnetic interaction when closely packed together. Single-pole version, also available, occupies 0.15 x 0.27 in. All models are rated at 100 V and can carry up to 0.5 A signal current and switch 3 W of signal power. Versions are also available supporting 3 V coil drives.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jul 28, 2011 Suited for +12 or +24 Vdc industrial applications, OKI-T/3-W32 Series accommodates +9 to +32 Vdc input range, has remote On/Off input, and measures 0.47 x 0.82 x 0.34 in. Non-isolated series, exhibiting efficiency of 89% typ, is fully compatible with Distributed-power Open Standards Alliance (DOSA) package specifications and offers 3 A programmable output voltage that can be set from +0.75 to +4.5 Vdc to suit needs of individual industrial design. Power output at 4.5 Vout is 13.5 W.

Larson Electronics, LLC    Kemp, TX 75143
Jul 27, 2011 Equipped with 400 W metal halide lamp, Model HAL-1X400MCE is suitable for wet areas and carries Class 1, Div 2 rating. Internal multi-tap ballast allows unit to operate with voltages ranging from 110-277 Vac. Constructed of non-sparking aluminum and finished in powder coat, 39 x 35 in. base incorporates slide and tilt design that enables tower to be deployed and raised by single operator. Wheeled tower assembly can be lowered to 5 ft and extended to maximum of 8 ft.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jul 27, 2011 Housed in 4 x 4 x 0.9 mm QFN package, Model DRV8662 integrates 105 V boost converter, power diode, and 50-200 V peak-to-peak fully differential amplifier. Device drives piezo actuator capacitances from 50-680 nF at 300 Hz, enabling variety of haptic effects, including feedback localized to specific area of device, and vibrations and pulses that change in frequency based on user interaction. Operating from 3.0-5.5 V supply, driver features transformer-less design and direct battery connection.

Larson Electronics, LLC    Kemp, TX 75143
Jul 27, 2011 Along with 12 V, 7 W LED lamp and integrated cord reel, Magnalight EHL-LED-120X12-100 hand lamp has inline transformer to step down 120 Vac current to 12 Vdc for low-voltage applications. Light is Class 1, Division 1 rated for Groups C and D, providing users in hazardous locations with low-voltage source of LED illumination. Included 100 ft of SOOW cord promotes mobility, while contrast and color rendering produce true color and sharp definition for close work and inspection.

OSRAM Opto Semiconductor    San Jose, CA 95134
Jul 26, 2011 Measuring 0.5 x 1 x 0.45 mm, ChipLED SFH 4053 IRED is suited for low-profile all-in-one computers, tablet PCs, laptop displays, and smartphones. Thin film device delivers 35 mW from operating current of 70 mA, and in pulse mode, unit can achieve as much as 260 mW from 700 mA. At wavelength of 850 nm, light from IRED is barely discernible to human eye, but is detected by receiver components.

Fiberoptics Technology, Inc.    Pomfret, CT 06258
Jul 26, 2011 Suited for large active diameter industrial applications, High Power LED Light Source couples light from monocolor matrix die into fiber optic cable. Resulting output exceeds EKE halogen lamp in active diameter sizes up to 12 mm. Unit offers 6,000 K color temperature, stable output throughout usable life, and active heat management with integral cooling fan. With optional Ethernet and RS485 connectivity, user can control pulsing, overdrive, and timing values over Internet in real-time.

Platinum Tools    Camarillo, CA 93012
Jul 26, 2011 Used to crimp/terminate AMP-style RJ45, RJ11, and RJ12 modular plugs, PROAMP crimp tool also cuts and strips Cat5e, Cat5, and Cat6 cables. Design ensures consistent, repeatable terminations, and zero flex frame prevents torque loss during crimp cycle. Every termination will meet FCC requirements, and built-in cutter and cable jacket strippers handle round and flat cables. Also, integrated die head assembly provides 360° connector support during crimp cycle.

Larson Electronics, LLC    Kemp, TX 75143
Jul 25, 2011 Featuring IP68-rated design waterproof to 3 m, Magnalight LEDPB10W-240X2E LED Light Bar resists destructive effects of salt water and elements. Dual rows comprised of 12 CREE XLamp MC-E® LEDs each produce 20,640 lm while drawing 20 A at 240 W from 12 V electrical system. Capable of operating with voltages from 9-46 Vdc, light bar is available in 20° spot and 40° flood configurations. Other features include active heat management as well as dimming, strobing, and flashing support.

Larson Electronics, LLC    Kemp, TX 75143
Jul 25, 2011 Drawing less than 1 A at 10 W from 12 V electrical system, Magnalight LEDP10W-1R LED produces 860 lumens of light. Unit measures 2 in. in diameter, uses PWM circuitry to control heat, and can be mounted in tight spaces. Constructed with aluminum body, stainless steel mounting hardware, and unbreakable LEXAN lens, emitter is IP68-rated and waterproof to 3 m, resisting damaging and corrosive effects of marine environment. It can produce 260 ft long beam in spotlight configuration.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Jul 22, 2011 Offered as standalone device, bq77910 offers protection and cell-balancing for 4- to 10-cell Li-Ion and lithium iron phosphate battery packs. IC monitors individual cell voltages and drives 2 N-channel power MOSFETs to interrupt current flow during fault conditions. Criteria for fault detection and recovery is fully programmable in non-volatile memory. Product simplifies battery pack designs for e-bikes, e-scooters, portable gardening tools, power tools, and UPS.