Dwyer Instruments, Inc.    Michigan City, IN 46361
May 24, 2007 Featuring 3-digit red LED display to facilitate viewing at extended distances, dual-stage Series TSS2 accepts up to 2 PTC thermistor temperature sensors to control temperatures from -58 to 302°F. Switch offers 0.1° resolution under 100°, and 1° resolution over 100°. Unit offers 2 independent SPST 8 A relays and can be customized via 34 user-programmable parameters. Voltage supplies, depending on model, include 12 or 24 Vac/dc, 115 Vac, and 230 Vac.

Linear Technology Corp.    Milpitas, CA 95035
May 24, 2007 Supplied in 2 x 2 mm 8-lead DFN package, LT3502/A operates from 3.4-40 V input range and has switching frequency of 1.1 MHz for standard version and 2.2 MHz for A version. Regulator delivers up to 500 mA continuous output current to voltages as low as 0.8 V and utilizes 900 mA, 300 mVCESAT switch with necessary boost diode, oscillator, control, and logic circuitry integrated on-chip. Other features include internal compensation, soft-start, and short circuit protection.

Universal Lighting Technologies    Nashville, TN 37214
May 24, 2007 Model B232PUS50-A Ballastar® light-level switching ballast for T8 lamps provides light level control by switching from full light to 50% power using standard wall switches or relays allowing for easy compliance with ASHRAE 90.1 and California Title 24 switching requirements. Model B232PUS50-A complies with CEE requirements for high performance T8 lighting, operates 1 or 2 F32T8, F25T8, or F17T8 lamps, and has a light ballast factor of .88.

Pickering Interfaces    Wobum, MA 01801
May 23, 2007 Supplied in 1U high case, 60-200 provides means of applying ac power to any instrument or ac-powered device. Single ac supply connection is connected to 8 switched ac outlets, which provide power to the connected instruments. Each connection can be turned on or off, including precise timing delays under programmatic control over Ethernet LXI compliant connection or controlled through any W3C compliant web browser. Emergency shutdown switch is included on front panel.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 23, 2007 Series A7 Mini Pressure Switches are designed for high current applications and can be used with non-hazardous gases or liquids. Compact, lightweight snap-action switch is diaphragm actuated and features nylon housing and factory set point between 0.25-50.00 psi. Models are built to customer specifications, options include switch type, electrical rating, electrical connection, process connection, and set point.

Sipex Corp.    Miliptas, CA 95035-1701
May 23, 2007 Model SP6415 LED drivers feature 1 inductive boost converter to power 2 independent drivers for driving white LED main panel and powering OLED subdisplay, or additional white LEDs. Model SP6415 can be configured for automatic turnoff when phone is open, features output voltage of up to 20 V, and offers full protection scheme against fault conditions such as over-voltage, over-current, over-temperature, and under-voltage lockup.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 23, 2007 LXI-compliant N6700 gives test system integrators flexibility to optimize performance and power to meet test needs. Modules N6753A and N6754A, together with 20 modules already offered, comprise family ranging in power from 50-300 W at 3 performance levels. Any of 22 modules can be combined in any of 3 MPS mainframes to create 1U-high DC power system of 1-4 outputs. Features include autoranging output capabilities, built-in Polarity Reversal Relays, and remote operation capabilities.

Crescent/Stonco    Union, NJ 07083
May 23, 2007 NyteWatch(TM) low-glare, luminaires offer twin 150 W quartz illumination while preserving nightime environments by projecting no visable light 90° above the fixture. NyteWatch(TM) lights feature Cut-off optics to reduce glare and Nyte-Glow(TM) dimming for dusk-to-dawn operation. Steinel(TM) motion sensitivity includes two 120° sensors with adjustable masks. NBA Model is adjustable from 0-30°, while NBC Model is fixed at 0°. Both models are available in black or white.

Linear Technology Corp.    Milpitas, CA 95035
May 22, 2007 Combining monolithic linear power manager, diode controller, and standalone battery charger, Model LTC4067 is intended for portable devices and battery backup systems. PowerPath(TM) control provides power to peripheral device and also charges single-cell Li-Ion/Polymer battery from USB bus or wall adapter power supply. Battery float voltage is preset at 4.2 V with 0.8% accuracy. Housed in 4 x 3 mm DFN package, unit provides up to 1.5 A programmable charge current and operates from -40 to 85°C.

Mid-West Instrument    Sterling Heights, MI 48314
May 21, 2007 Model 121 features industrial terminal strip and removable cover for wiring, 8-28 Vdc loop power, weather resistant gauge front, and push button zero reset feature. Accurate at ±2% from 20-100% of full scale, Model 121 operates at temperatures of 20-150°F and safe working pressure of 6,000 psig. It is available in aluminum or 316 SS pressure housing with 316 SS and internal ceramic parts in pressure ranges from 0-5 to 0-110 psid.

Kulicke & Soffa Industries, Inc.    Willow Grove, PA 19090
May 21, 2007 MaxSoft(TM) copper bonding wire, engineered for various discrete and IC applications, offers physical properties that help reduce IC bond pad stress and promote second bond strengths - even in fine-pitch applications. Available in diameters from 0.8-1.3 mil, wire has 6 month shelf life when stored in recommended conditions inside original packaging.

Kulicke & Soffa Industries, Inc.    Willow Grove, PA 19090
May 21, 2007 Designed for stacked-die and multi-tier applications, Formax(TM) bonding wire offers consistent loop profiles and promotes linearity and stability. It is capable of loop heights of less than 3 mil to over 16 mil, with wire span up to 320 mil using 1 mil dia wire. Intermetallic stability is based on proprietary 3N gold composition.

Heyco Products    Toms River, NJ 08753
May 21, 2007 Characterized by precision-molded, 2-piece mechanism with attached integral locking closure, Flexicon Conduit Mounting Clips provide secure means of mounting Flexicon FPAS or FPI liquid-tight conduit, cables, and tubing into vertical or horizontal indoor/outdoor configurations. Constructed from polyamide 6/6 Nylon, units accommodate .25-2 in. conduit and tubing and are resistant to salt water, weak acids, gasoline, oil, grease, and common solvents.

XP Power    Sunnyvale, CA 94085
May 21, 2007 Single output, 480 W-rated DNR480 offers universal input, accepting voltages from 90-264 Vac (single phase) without switch selection or 340-575 Vac (3-phase) - depending on model. Both 24 and 48 Vdc output variants have adjustable outputs: 22.5-28.5 Vdc for 24 V model, and 47.0-56.0 Vdc for 48 V model. For applications requiring increased power, up to 3 units may be connected in parallel. Each industrial ac/dc power supply is offered with detachable or fixed screw terminals.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
May 21, 2007 Integrating level shift and slew rate control functionality into single device, Model AAT4285 allows designers to minimize parts count in 12 V applications. P-channel MOSFET switch operates across 3.0-13.2 V input range and is designed for high-side load switching. Housed in 8-pin SC70JW package, unit offers turn-on time of 100 µs, fast shutdown load discharge capability, and RDS(ON) of 240 mW at 12 V to maximize load switch power handling.

W.A.C. Lighting Company    Port Washington, NY 11050
May 18, 2007 Black/White Double-Paned, Cut-Glass Quick Connect Pendants are handcrafted products with individual shades produced with 2 panes of glass, fused together, and cut by hand to create 3D design. Daytona (G526), Harlequin (G525), and Groove (G524) cylindrical pattern pendants measure 9 in. tall and 4 5/8 wide, while Hendrix (G527), Chaplin (G528), and Hepburn (G529) pendant styles comes with buffet-shaped glass lampshades, each with 3 7/8 in. width and 4 1/8 in. height.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 18, 2007 Able to fit in 1U high rackmount configuration, Model 7406 allows single device connected to COMMON port to access either of 2 networks connected to ports A and B. Product can be controlled via front-panel pushbutton or rear-panel RS-232 serial port. Once computer is connected to remote port, any common terminal emulation software may be used to interface with switch. Switched RJ45 ports are transparent to data format, and front panel LEDs display switch position and power presence.

LEDtronics, Inc.    Torrance, CA 90505
May 18, 2007 Designed to fit battery-powered flashlights with 9 mm screw-in incandescent bulb, T3¼ (9 mm) Single-Contact Screw-In LED Bulbs are offered with 1 or 3 cool white LEDs that respectively offer total light output of 15 and 45 cd. Average life span is 50,000 hr, and solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. Cool white (8,000 Kelvin) bulbs output 13,000 MCD at 20° angles and produce minimal heat.

FiberFin, Inc.    Yorkville,, IL 60560
May 18, 2007 Intended for use with Versatile link® connectors, Installer's Tool Kit includes hand tool that can terminate fiber and strip jacket to proper length, as well as crimp tool that installs connector with consistent results every time. Blade on termination tool is mounted on gear assembly that rotates blade every time user cuts fiber for even wear. After 1,260 cuts, cutting assembly will stop and prevent usage of unit until replacement cutting head is installed.

BRECOflex Co., L.L.C.    Eatontown, NJ 07724
May 18, 2007 Designed for T10 and AT10 pitch timing belts, Mechanical Connection System allows for access to shafts and pulleys without disassembling machinery parts. Finger spliced ends of timing belt are prepared to be clamped together with connecting kit hardware, which consists of carbon fiber reinforced polyamide connecting plates and tooth inserts, including screws.