ETCO Incorporated    Warwick, RI 02888 1501
Mar 12, 2008 ECTO Bender-Booter applies boot to terminated ignition wire and bends it to produce 45 and 90 deg angled or straight boots. Featuring dual palm-button actuation for operator safety, air-powered unit is capable of processing up to 100 wire assemblies per hr. Measuring 24 x 18 in., it is designed to bend and boot ETCO CB2, CB3, AB16, CB8, AB15, and AB20 boots, along with DT2000LB, DT207LB, DT200B, DT250B, DT257B, SP19, and DT7B ignition terminals.

Meltric Corporation    Franklin, WI 53132
Mar 12, 2008 Featuring butt-style contact technology, Welder Plugs and Receptacles are rated to safely make and break under full load up to 200 A, and are UL/CSA approved for branch circuit disconnect switching. Safety shutter maintains dead front thus preventing unintentional access to live parts. Units facilitate compliance to NFPA 70E electrical safety requirements because they maintain NFPA 70E defined hazard/risk category 0 during electrical equipment connection and disconnection processes.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Mar 11, 2008 Available with gull wing or J-lead termination, CS3304 Series offer contact resistance of less than 50 mW, dielectric strength of 1,000 Vrms, and insulation resistance of greater than 100 MW. Contacts are silver-plated phosphor bronze and terminals are silver-plated brass. Operating from -40 to 85°C, surface mount momentary switches are suited for computers, test and measurement equipment, consumer electronics, telecommunications, and instrumentation.

Waytek Inc.    Chanhassen, MN 55317
Mar 11, 2008 E-Stop, Push Button, and Selector Switches include contact elements that are self-cleaning and that operate in double breaking action. Rated 12 A at 24 Vdc and 6 A at 120 Vac, they are compatible with variety of control station enclosures and operators for custom assembly.

Kim Lighting    City of Industry, CA 91749
Mar 11, 2008 Available with 30, 45, or 60 W LED modules, GEM® Performance Bollards feature fluted, tempered glass refractor that spreads light evenly in beam pattern. Stepped design of lower body baffle minimizes surface brightness, while die cast construction produces sharp detailing, and sealed optical system eliminates intrusion of dirt and insects. Placed high in optical system, LEDs optimize luminaire efficiency in desired luminous zone at 60° from vertical.

Uniloc USA Inc.    Irvine, CA 92612
Mar 11, 2008 Providing protection against cyber security threats, StrongPoint(TM) uses device recognition to create device-locked secure private networks between StrongPoint Server at TOC and StrongPoint appliances in traffic cabinets in field. It offers hack-resistance and provides bidirectional security. Featuring cross-platform compatibility with operating systems and field control hardware devices, unit gives notification and location of unauthorized StrongPoint VPN connection attempts.

Pass & Seymour/Legrand    Syracuse, NY 13221
Mar 10, 2008 Including light-, medium-, and heavy-duty models in single- and 3-phase versions, Panel TVSS Units deliver premise-wide protection against electrical surges caused by lightning, utility grid switching, and electrical equipment such as motors, arc furnaces, and welders. Compact units include Metal-Oxide Varistors (MOVs) to handle large surges and slow-blow current fuses to manage intermediate surge currents, and offer EMI and RFI filtering.

LEDtronics, Inc.    Torrance, CA 90505
Mar 10, 2008 Combining LED technology, 25 mm Edison screw-in base, and light optimizing design, PAR30-Style LED spotlight bulbs produce 480-544 lumens of light. They are available in 40° light-emitting viewing angle, running on 80-260 Vac current. With low power draw and high shock/vibration resistance, bulbs draw 15.8 W power, replace 50-75 W PAR30 incandescent bulb, and come with color temperatures of 3,000 K warm white and 5,000 K pure white.

Universal Forest Products    Grand Rapids, MI 49525
Mar 07, 2008 Providing source of ambient light for decks and fences as well as stair posts, gate entrances, and walkways, Solar Post and Stair Light can be mounted on wood, composite, or vinyl posts. Top-mounted solar lens and rechargeable AA battery powers LED bulb. Product is available in black or white and in 2 sizes that accommodate 4 x 4 in. or 6 x 6 in. posts.

International Rectifier Corp.    El Segundo, CA 90245
Mar 07, 2008 Designed for DC-DC converters used in notebook and desktop computers, Model IR3721 measures dynamic power at output/load side of voltage regulators. TruePower(TM) technology captures information with 2.5% accuracy at 65°C, minimizing dynamic errors. Device monitors output filter inductor current in buck or multiphase converters from 0.5-1.8 V, and provides options of using resistive sensing or inductor DCR current sensing with internal compensation feature.

Eaton Electrical    Moon Township, PA 15208
Mar 07, 2008 Available in tower and rack options, Pulsar 700, 1,000, and 1,500 VA models accommodate multi-position PDU that adds receptacles to back, side, or top of UPS. Universal HotSwap Maintenance By-Pass module assures power continuity by allowing UPS to be replaced without interrupting power supply. Combining network integration software and communication connectivity, double-conversion, on-line systems protect network servers, storage systems, VoIP, and sensitive medical instrumentation.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 07, 2008 Signal50 Warning Tower Lights are recommended for all applications that require operator notification and/or intervention. Suited for industrial control systems, 50 mm high-grade, heavy-duty tower lights can be customized with over 100 combinations of lenses, voltages, and illumination types including incandescent, LED, strobe, and flashing. Devices target food processing, packaging, and electronic industries.

Singular Controls, Inc.    Tarrytown, NY 10591
Mar 07, 2008 Suited for metalworking, woodworking, textile, plastics molding, and other industrial applications, Series 211 single-function foot switches can handle up to 18 A, ¾ hp load and feature yellow, cast aluminum protection guard, steel pedal, 4 in. wide actuator, and skid-resistant base pads. UL and CSA listed units are equipped with snap-acting switch that delivers more than 2 million operations. Options include choice of cord length, strain relief, protection guards, and plug style.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Mar 07, 2008 Optimized for delivering image processing contrast when inspecting contours, edges, or openings of component, Nerlite LT430 backlights are available with even and diffuse transmitted-light illumination and incident-light illumination features. Various frameless models provide uninterrupted surface lighting with edge-to-edge technology feature. Offered in 7 sizes from 47 x 59 mm to 200 x 250 mm, products are available with red, green, blue, white, and IR light sources.

Corsair Memory    Fremont, CA 94538
Mar 07, 2008 Certified under 3-way NVIDIA® SLI® Technology Certification Program, 1,000 W Model HX1000W features twin transformer, dc-to-dc conversion, and solid state capacitors rated at 105°C. With active power factor correction and 80% or more energy efficiency across range of loading conditions, power supply generates minimal heat during operation. Thermally controlled, double ball bearing fan measuring 140 mm provides effective cooling and quiet operation.

Solar Technology International Ltd.    Bredon   United Kingdom
Mar 07, 2008 Using solar energy, FreeLoader 8.0 can power iPod for 18 hr, mobile phone for 44 hr, PSP for 2.5 hr, and PDA for 22 hr. Charger features durable casing and ability to fold into minimal device that can be slipped into pocket or handbag. To ensure batteries never run flat, device can simultaneously charge its own internal battery, which holds charge for up to 3 months.

International Coil/Acute Power    Brockton, MA 02301
Mar 07, 2008 Running at 400 kHz, QMM150 dual-output eighth-brick has independently regulated and isolated outputs and can be configured as single-output or plus-minus system. Converters come in 24 and 48 V input models in 6 versions that provide dual outputs from 0.9 V, 25 A up to 5 V, 15 A. Line regulation is ±0.5%, load regulation is ±0.5% no-load to full-load, while output ripple and noise is 50 mV at 20 MHz. Converters are rated for operation over -40 to +105°C and are RoHS compliant.

Pickering Interfaces Inc    GRANTS PASS, OR 97526
Mar 06, 2008 Offered as 4- or 8-slot BRIC module, 40-569 integrates 16-wire analog bus with BUS Matrix cards and Resource Distributor cards. Scalable design permits inclusion of up to 2 off Resource Distributor subsystems and 6 off Bus Matrix subsystems. Also available, 40-618 Source Switching Module implements switching functions defined in Appendix D of ARINC specification. Each module can be supported in any 3U PXI chassis or Pickering Interfaces LXI Modular Switching Chassis.

Staco Energy Products Co.    Dayton, OH 45403 1314
Mar 06, 2008 FirstLine® 924 3-phase UPS central emergency lighting system provides 90 min power supply during blackouts and isolates and protects connected load from damaging sags, swells, harmonics, noise, and voltage imbalances in primary ac supply. On-line, double-conversion central inverter supports any lighting system. Input voltage rating is 208 or 480 Vac with ±20% range, for input range of 166-250 and 384-576 Vac, respectively, at 60 Hz. Output voltage is regulated to ±1% of nominal at full load.

Bookham, Inc.    San Jose, CA 95134
Mar 06, 2008 Supplied in hermetically sealed, 2-pin package with floating anode/cathode, Telcordia GR-468-CORE qualified 6 W un-cooled fiber coupled multimode laser diode lets service providers extend triple play service delivery to fiber customers located further away from central office or cable head-end. Product is designed for pumping next-generation amplifiers in cable and FTTx networks, enabling network providers to replace DSL running on coax/copper with GPON running on fiber.