Phihong USA    Fremont, CA 94539
Nov 14, 2007 Available in 5, 12, 24, and 48 V outputs, Series PSC30U 3-wire input switching adapter consumes less than 0.5 W and supplies from 20-30 W to single output voltage. Compact unit measures 3.88 x 2.17 x 1.24 in. and weighs 8.82 oz, making it suitable for portable equipment, peripherals, networking systems, and gaming machines. Contained in non-vented case, adapter is equipped with auto restart for over-current protection and output can be shorted without damage.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 14, 2007 Low-impedance, high-voltage analog switches are available in DG467, DG468, DG447, and DG448 SPST models and DG449 SPDT model, with maximum on-resistance down to 10 W, flatness up to 2.6 W, and ±15 V analog signal range. Devices operate from single 7-36 V supply or from dual ±4.5-20 V supplies. Suiting audio, video, and data switching applications, switches feature rail-to-rail signal handling and are TTL and CMOS input compatible.

Linear Technology Corp.    Milpitas, CA 95035
Nov 14, 2007 Supplied in 15 x 15 x 2.8 mm LGA package, LTM4607 regulates output voltage from variable input voltage greater than, less than, or equal to the output voltage. It integrates synchronous buck-boost DC/DC controller, 4 N-channel MOSFETs, input and output bypass capacitors, and all compensation circuitry. Operating from 4.5-36 VIN and regulating output voltage from 0.8-24 V, product is phase-lockable to external clock frequency from 200-400 kHz and achieves efficiencies up to 97.7%.

Real Time Automation    Wauwatosa, WI 53222
Nov 14, 2007 InstantCommunications is complete industrial communications interface on chip that enables manufacturers of industrial and process industry products to add Modbus, Modbus TCP, EtherNet/IP, DeviceNet, and/or TCP industrial communications to their products. InstantCommunication solutions for OEM manufacturers are delivered on chips, as small circuit board modules, or as packaged add-on modules.

3M Co., Electronic Products Div.    Austin, TX 78726
Nov 14, 2007 Suited for system design engineers working with VME and CompactPCI backplane systems, MetPak HSHM B19 supports speeds of up to 5.0 Gbps per differential pair while maintaining pin-to-pin compatibility on backplane with VME64x, P0 VITA 31, and P3 PICMG 2.16 connectors. It uses virtual coaxial shielding technology to provide maximum performance with minimal cross talk and skew, allowing them to plug into existing 2 mm hard metric connectors and support PCI Express and RapidIO protocols.

SIXNET    Clifton Park, NY 12065 0767
Nov 13, 2007 Available with rugged D38999 style connectors, Models ET-8MS-MIL-1 (Managed) and ET-8ES-MIL-1 (Unmanaged) 8-port Ethernet switches are rated for MIL-STD-810F, MIL-STD-461E, and MIL-STD-1275. Each port supports auto-speed/duplex, auto-crossover, and auto-polarity for plug and play connections. Managed models support features such as RSTP, SNMP, QoS/CoS, IGMP, and VLAN. Dual (redundant) power inputs with MIL-STD-1275 military spike and surge protection are also available.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 13, 2007 Suited for oscilloscope measurements in environmental chambers and other settings with extreme temperature conditions, Model N5450A extension cable offers 2 different operational temperature ranges, depending on probe head configurations. It provides temperature range coverage of -55 to 150°C and -25 to 80°C when used with N5381A differential solder-in probe head, and E2677A differential solder-in probe head, E2678A differential socket probe head, or N5425A/26A ZIF tip, respectively.

Astrodyne Corp.    Mansfield, MA 02048
Nov 13, 2007 Including 30 and 60 W models, PLN Series devices use PFC topology to offer up to 86% efficiency, class C Harmonic levels for lighting industry, and comply with UL1310 class 2 safety approvals providing less than 5 A. IP64 enclosure protects against dust and moisture, making them suitable for indoor/outdoor lighting applications. Units feature built in constant current operation with adjustable overcurrent and output voltage settings, and operating temperature range of -30 to +50°C.

RECOM Power Inc.    Brooklyn, NY 11201
Nov 12, 2007 Suited for ambient temperatures up to +85°C at full load, constant current Model RCD-24-0.35 features non-isolated buck regulator topology in 22.1 x 12.6 x 8.5 mm case. With input voltage of 4.5-36 V, unit provides 1.2-35 V and 350 mA with ±2% accuracy. Converter can be powered down and dimmed by applying PWM signal with frequency from 10-1,000 Hz. Driver is suited for applications such as fork lift trucks, traffic lights, railway signaling, and aircraft interior illumination.

Richard Gray's Power Company    New Orleans, CA 70130
Nov 12, 2007 Suited for limited-space applications, RGPC 600RM Pro contains 6,000 W parallel choke engineered to fit into 2U rack space. There are 6 commercial-grade Hubbell outlets on back panel and one convenience outlet on front. Also available, one rack-space RGPC Extender Pro utilizes 12-gauge wiring and offers 6 commercial-grade Hubbell Outlets hand-wired independently to power source with no filtering. Both models are designed to add automation capabilities to any power line conditioner.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 12, 2007 Utilizing eXtreme Light Technology, Model 191XL Hazardous Location Flashing LED Warning Light is Class I Division 2, Class II Division 1, and Class III signal that is configurable for steady burning or flashing mode. Low in-rush circuitry assures compatibility with factory automation systems and reduces electrical interference with in-rush-sensitive devices. Type 4X, Marine-rated unit features aluminum alloy housing with ¾ in. 14 NPT pipe mounting and operates on 24 Vac/dc, 120, and 240 Vac.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 12, 2007 Featuring eXtreme Light Technology(TM), 225XL LED Warning Light produces light output equal to or greater than 100 W incandescent lamp. Unit operates on 24 Vac/dc, 120 Vac, and 240 Vac, and is available in amber, blue, green, and red. Though factory set to flashing mode, light can be switched between flashing and steady burn in field. Housed in die cast zinc alloy with ½-14 NPT pipe mounting, light has polycarbonate clear dome and is Type 4X, IP66, and Marine rated for indoor/outdoor use.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 12, 2007 Model 27XL explosion-proof LED light with Extreme Light Technology produces 60 high-intensity flashes/min and operates on 24 Vdc, 120 Vac, and 240 Vac 50/60 Hz. UL listed for Class 1, Division 1, Groups C and D; Class II, Division 1, Groups E, F, and G; Class 1 Division 2, Groups A, B; and Class III, it is also Marine- and type 4X-rated. Powder epoxy finish applied over aluminum housing provides corrosion-resistance and all exposed hardware is 316 SS.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 12, 2007 Rated for hazardous environments, Model 2000 is available in 24 Vdc model and multi-volt configuration with circuit that automatically compensates for different input voltages. Beacon is activated through direct application of power or by contact closure from remote field device. It may be operated in steady-on, slow-flash, or rapid-flash, depending on position of terminal block wiring. Constructed of LM6 or A356.0-T6 aluminum, IP66 enclosure features integral mounting feet.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Nov 09, 2007 PowerWise® LM201xx and LM202xx series include 10 synchronous buck regulators, each of which integrate 2 switching MOSFETs and utilize externally compensated peak current-mode control loop. Operating from 2.95-5.5 V input, 9 buck regulators (fixed and adjustable switching frequency) deliver up to 5 A continuous output current. High-voltage buck regulator, LM20242, operates with 4.5-36 V input and delivers up to 2 A continuous output. Frequency is adjustable from 250 kHz to 1 MHz.

Honeywell Power Supplies    Northford, CT 06472
Nov 09, 2007 Comprised of 7 models, HPTV24-E Series powers CCTV cameras and other video accessories. Products feature 2 circuit protection choices (automotive fuses or circuit breaker type PTCs), transformers with built-in thermal protection, and LED diagnostic indicators. Series delivers constant source of 24 Vac power with 4 or 8 A of supply current. All models offer choice of output distribution via 4, 8, or 16 individually protected circuits.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Nov 09, 2007 Vaporproof Lighting Fixtures offer rugged, seamless die-cast aluminum construction that prevents moisture entry. Configurations include VAX Series box mount fixtures, VAT Series surface mount units, VAP Series right angle units, VAS Series pendant mount fixtures, and VPX Series wall mount units with box. All fixtures operate on 110/120 Vac and are rated 100 W when installed with glass globe and 75 W with Lexan® globe. They are available in amber, blue, clear, green, and red.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Nov 09, 2007 Available with or without mounting bosses, JS1200 five-position joystick switch is designed for SMT applications that require navigation. Respective travel for push and tilt is 0.15 mm ±.01 mm and .20 mm ±.01 mm, and life expectancy is 200,000 actuations in any direction. Switch has contact rating of 20 mA @ 12 Vdc and is suited for use in consumer electronics or handheld instrumentation devices for various markets requiring user interface.

Omron Electronics, LLC    Schaumburg, IL 60173
Nov 09, 2007 Providing up to 40 A switching capacity per pole on NO contact, Model G7Z features resistive load rating of 40 A at 440 Vac for NO contact and 25 A at 440 Vac for NC contact. Space saving unit is offered in 12 or 24 Vdc coils, and maintains dielectric withstand of 4,000 Vac between coil and contacts. Suited for inverter, solar/fuel battery, and Uninterruptible Power Supply applications, it has inductive load rating of 22 A at 440 Vac on NO contact.

Tyco Electronics/Raychem.    Menlo Park, CA 94025-1164
Nov 09, 2007 Featuring 0805 EIA compliant form factor, surface-mount PolySwitch(TM) picoSMD035F offers circuit designers smallest PPTC (polymeric positive temperature coefficient) overcurrent protection device available for consumer and computer electronics. Resettable solution, rated at 6 V, provides hold current of 0.35 A, trip current of 0.75 A, and max resistance of 1.4 X. It is full-edge terminated with nickel-gold finish and RoHS-compliant.