Calex Mfg. Co., Inc.    Concord, CA 94520
Jan 27, 2009 Supplied in half-brick, cast case and potted with thermally conductive potting compound, 24S24.8TH offers 4:1 input range of 9-36 Vdc and outputs 24 V at up to 8.33 A. Pulse by pulse current limiting, over-temperature protection, and auto softstart are included, along with ability to fully regulate output down to no-load condition and remote sense for voltage regulation directly at load. Output trim range is -35 to +10%, while load and line regulation are 0.02 and 0.01% respectively.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Jan 26, 2009 Wall-mounted in standard 3-gang electrical box, IPAC-GL1 comes with preconfigured default program, LCD, and front panel controls that facilitate setup and programming for complete switching system comprised of up to 210 switched loads; CNX-B, C2N-DB, or Cameo keypads (up to 16); 41 occupancy and photo sensors; and 100 time clock events. Onboard e-Control® Web server achieves complete integration as part of facility-wide managed control network.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 26, 2009 Featuring rated voltage of 250 Vac and 400 mW coil power, RZ series is suited for household appliances, building automation, heating, timers, industrial controllers, and POS automation. It offers one pole with 12 or 16 A current rating and one CO or one NO contact. Operating in ambient temperatures to 85°C, product is VDE and UL approved, fully RoHS compliant, and meets appliance industry requirements of IEC60335-1.

Semiconductor Circuits, Inc.    Atkinson, NH 03811
Jan 26, 2009 Suited for mobile/optical telecom, industrial, and test equipment, SC50B Series 50 W DC/DC converter features 4:1 input range of 9-36, 18-75 Vdc, as well as single and dual output. Low noise unit is fully isolated (1,500 Vdc) and I/O protected, and has efficiencies greater than 88%. Designed for through hole mounting, optional case with threaded inserts for heatsink mounting is also available.

Grayhill, Inc.    La Grange, IL 60525 5914
Jan 26, 2009 Manufactured to meet mil-spec standards for mechanical shock and moisture seal, Series 04J consists of single-pole, 4-way toggle switch with pushbutton switch in center position. Standard knob is shaped and sized for operation with single thumb or finger, allowing both directional control and pushbutton select without requiring user to remove finger from control. Applications include military vehicles, construction equipment, and industrial controls.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jan 26, 2009 Designed to convert ambient light into power, credit card-sized eZ430-RF2500-SEH kit combines Cymbet Corporation's EnerChip(TM) lithium thin-film battery technology with TI's MSP430 microcontrollers, 2.4 GHz CC2500 RF transceivers, and eZ430-RF2500 development tool. Eliminating need for system batteries, kit enables developers to build self-powered, solar-based wireless sensor networks in remote or hard-to-access environments.

Douglas Electrical Components, Inc.    Rockaway, NJ 07866
Jan 26, 2009 Available with aluminum, titanium, steel, brass, plastic, or low-out-gassing epoxy housings, Ductorseal® sealed wire and cable assemblies solve through-bulkhead conductor sealing problems by providing interconnecting harness in fully sealed and pre-wired hermetic feedthrough. They are available with various standard or custom wire bundles, and are epoxy-sealed to provide leak-free performance in operating environments from 1x10^-10 Torr through 15,000 psi and 4 K (LHe) through 200°C.

Semtech Corp.    Newbury Park, CA 91320
Jan 26, 2009 Offering greater than 30 dB attenuation for cellular lines operating at 1.8-2.5 GHz, EClamp(TM) 237xK family of resistor-capacitor (R-C) protection devices have low C(in) value of 20 pF and resistance of 100 W. Each device includes TVS diodes for ESD protection and R-C network for EMI/RFI filtering. Offered in SLP package, they feature flow-through design, 500 micron package height, and 400 micron lead pitch. Series includes 4-line EClamp2374K, 6-line EClamp2376K, and 8-line EClamp2378K.

Newport Corp.    Irvine, CA 92606
Jan 23, 2009 Featuring 36 x 60 in. footprint, PV IsoStation(TM) Vibration Isolation Workstation features storage and shelving for instruments and worksurface that minimizes light reflectivity. It includes RG series, 3 x 5 ft breadboard with surface that has durable black matte finish and ¼-20 hole pattern on 1 in. centers. Instrument rack is constructed of welded heavy gauge steel. Workstation frame is enclosed on all sides except rear, with 2 doors opening toward front of unit.

Snake Creek Lasers    Hallstead, PA 18822
Jan 23, 2009 Constructed of machined and anodized aluminum, water-resistant Prolight-G makes possible illumination and visualization of objects at distances beyond reach of traditional incandescent bulbs and LED-based flashlights. Unit features continuously variable cone-angle setting to accommodate short-distance illumination tasks. It comes with push-button tail-cap switch, lanyard, and one CR-123 Lithium battery.

JKL Components Corp.    Pacoima, CA 91331-2376
Jan 23, 2009 Used with standard or high power LEDs, Custom Silicone Lenses can focus, shape, or confine light output. Thermal stability and UV resistance make them suited for harsh and high temperature applications. With Shore hardness ratings from 25-80 and resistance to compression, aging, and ozone, lenses are compliant with aircraft and automotive quality and environmental standards. They are available installed on LEDs or can be molded to custom configurations.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 23, 2009 Finger-proof CROWN LINE bus bar system consists of extruded profile holding 2 solid copper conductors; power is supplied to conductors using quick connect color-coded RAPID LOCK right angle sockets. Option to vary conductor thickness provides flexible design up to 2 m in length, with ability to pre-form conductors to fit into awkward envelopes, thereby maximizing available space for essential equipment. Circuit breaker connector can be mated to busbar at any location along its length.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 23, 2009 Supplied in 16-pin, 3 x 4 mm TDFN package, AAT3691 regulates battery charge voltage and current for 4.2 V lithium-ion battery cells used in portable systems. Integrated over-voltage protection (OVP) up to 28 V offers response time under 1 µsec, and IC supports inputs from AC adapters as well as USB ports across 3.0-6.75 V (typ) range. Charger intelligently assesses which input source offers minimum charging time and modifies charge path accordingly.

ELB Electronics    Arcadia, CA 91006
Jan 22, 2009 Available in 2- or 3-lamp models, ELB Plus T8 32 W Dimming Ballast provides continuous light level dimming between 100-10% and allows facility managers to set ballast maximum and minimum light level output. Unit is equipped with built-in line voltage protection and 0-10 V control can be wired as Class 1 or Class 2 circuit. In addition to complying with ASHRAE 90.1 requirements for load reduction, unit meets ANSI standards C82.11-1993 and CD82.41-1991 and is UL-listed.

Hewlett Packard    Houston, TX 77269-2000
Jan 22, 2009 Models T750 G2, T1000 G3, and T1500 G3 protect computer equipment and critical data against damage due to inconsistent/fluctuating power in SMB, remote office, and retail environments. Line-interactive units, featuring buck and boost voltage regulation, respectively offer 750, 1,000, and 1,400 VA power ratings. Along with front panel display and battery management technology, each model comes with support for prioritized shut-down of attached devices and Network Transient Protection.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Jan 22, 2009 Offering momentary and latching switching, RoHS compliant BT Series comes in 7 single LED colors and 6 dual LED colors, with round, square, or no frame with 9 cap style options. Cap colors come in semi-transparent, transparent, and opaque styles with 10 laser etching choices. Electrical rating is 100 mA at 30 Vdc, contact resistance is less than 50 MW max, dielectric strength is 500 Vrms min, and switch is rated for 10,000 cycles. Operating temperature range is -40 to 85°C.

Alpha Source    Milwaukee, WI 53223
Jan 22, 2009 Designed to make unplugging safer for healthcare professionals, RingPlug is built with 6 o'clock and 9 o'clock angle configurations. It features ergonomic design that minimizes cord damage and emphasizes safer way to unplug cords. Cord is UL approved for hospital use on equipment such as defibrillators.

Littelfuse, Inc.    Des Plaines, IL 60016
Jan 22, 2009 Compact 215 Series Fuses come in 15, 16, 20 and 25 A ratings for up to 250 Vac service. Ceramic body, time-lag fuses are suited for use in power supplies, white goods, air conditioner compressors, and other high-amp equipment that needs protection against high fault-current conditions. RoHS compliant fuses can interrupt currents as high as 500 A at 250 Vac under fault conditions, and are recognized under UL and CSA component programs.

Emerson Network Power    St. Louis, MO 63136
Jan 22, 2009 Liebert PSI-XR provides 5+ min of battery backup at full load, with optional external battery cabinets for extending runtime. Configured at 110/120/127 Vac with range of output capacities, it offers remote communications and shutdown options for network closets, IT rooms, and small data centers. Also available, Liebert PSA provides up to 5 min of battery backup at full load for small office computers and electronic equipment. Various output capacities are available for 120/230 Vac models.

ERNI Electronics, Inc.    Midlothian, VA 23112
Jan 22, 2009 UL/CSA approved M8/M12 distribution boxes feature IP65/IP67 protected housing that withstands oil, lubricants, and vibration. M8 modules are available with 3- and 4-pin sockets, while M12 modules come with 4- and 5-pin sockets (A coded). Control level is connected by pre-assembled hybrid trunk cable, which acts as both power supply and data link for sensors and actuators connected to I/O box. All boxes utilize LEDs to display status and operation mode of I/O ports.