Weidmuller, Inc.    Richmond, VA 23236
Aug 18, 2009 Available for most industrial PLCs and Micro PLCs, pre-assembled specific Interface Cable Assemblies feature jacketed round cable that is attached directly to original connectors for specific PLC model I/O card. Several connector styles are available to connect to PLC interface boards, including flat connectors with strain relief and polarized connections, shielded Sub-D connector with shielded 24 AWG cabling, and industrial connectors rated up to 250 V and 8 A.

Endicott Research Group, Inc.    Endicott, NY 13761
Aug 18, 2009 Providing everything needed to get panel, backlight, and driver fully operational, Smart Kit(TM) Development Kits include ERG LED driver card, flying lead input harness, DigitalView® to ERG plug-and-play input harness, and direct mate LED driver-to-LCD interconnect wiring harness. All components come in 8.5 x 5 in. polyethylene bag labeled with manufacturer and model number of LCD panel as well as part numbers for driver card and harnesses.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Aug 18, 2009 Delivering up to 91% efficiency, PS3500 24 Vdc, 15 A power modules feature modular design and selectable wiring configurations. They plug directly into 3- or 6-position chassis/backplane for maximum capacity of 45 or 90 A, respectively. Features include universal supply voltage of 90-250 Vac/90-300 Vdc, user-adjustable output of 22.5-30 Vdc, convection cooling, and configurable load sharing and alarm functions. They are certified for Class I Div 2/Zone 2 ATEX Zone 2 mounting.

L-Com, Inc.    North Andover, MA 01845
Aug 18, 2009 Designed to protect computer's USB ports from surges and spikes from attached devices, AL-ECF504-AB can be mounted in ECF style panels, and can also be used in custom cut wall plates and panels. Low capacitance diodes protect data lines and ensure USB 2.0 speeds, while protection device clamps power lines to safe levels. Unit is suited for protecting PC from USB connected devices including USB hubs, WiFi USB client adapters, and USB enabled surveillance cameras.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 17, 2009 Available in 25 MHz SPI(TM) and 400 kHz I²C versions, MAX11810 and MAX11811 are touch-interface systems with integrated 4-wire touch-screen controllers, haptic controller drivers, and IR-based proximity sensing. Each operates from one 1.7-3.6 V supply and can drive DC motor directly or piezo elements using external piezo driver. Also included, automatic validation of touch responses functionality reduces data transfer and power draw.

Linear Technology Corp.    Milpitas, CA 95035
Aug 17, 2009 Equipped with 1.1 W MOSFET gate drivers, Model LTC3857/-1 operates with selectable fixed frequency from 50-900 kHz. Two-phase, dual output synchronous step-down controller draws 50 µA when one output is active and 80 µA when both are enabled. Each output can be set from 0.8-24 V at output currents up to 20 A, with efficiencies as high as 95%. Input supply range of 4-38 V is wide enough to protect against automotive high voltage transients and continue operation during cold crank.

Philips Lighting Co.    Somerset, NJ 08875
Aug 17, 2009 Using fluorescent and solid-state lighting technologies, ActiLume Color System provides dynamic and static color effects. It is comprised of 3 basic elements: color controller, Advance ROVR electronic ballasts, and IR remote or ActiLume Color Studio programming software with RS232 gateway and optional remote. Designed to eliminate complicated commissioning, plug-and-play system can control up to 10 color fixtures per controller via its red, green, and blue output ports.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 14, 2009 Models MAX14529E and MAX14530E provide high-current USB charger detection and ±15 kV ESD protection for portable devices. Offered in 1.5 x 2 mm, 1-bump wafer-level package, they include MOSFET to protect low-voltage systems against voltage faults up to 28 V. Units operate over -40 to +85°C temperature range. Devices are suited for cell phones, media players, PDAs, and other space-constrained applications.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 14, 2009 Housed in 1.4 x 1.8 mm UTQFN package, Models MAX4995A/MAX4995AL/MAX4995B/MAX4995C/MAX4995AF feature ±10% accurate current limit, protecting host devices against faulty load conditions. To handle overcurrent events, Models MAX4995A/MAX4995AL/MAX4995AF go into autoretry mode, while Model MAX4995B latches off switch, and Model MAX4995C places device in continuous current-limit mode. All devices provide reverse-current protection, which prevents current from being dumped back into source.

Cicoil Corp.    Valencia, CA 91355
Aug 14, 2009 Cat 5e cable, featuring flexible flat profile and extruded silicone encapsulation, meets/exceeds all electrical and signal requirements for Cat 5e standard. Rated over -65 to +260°C range, flame-resistant and submersible cable is resistant to steam, salt water, and de-ionized water. It exhibits repeated bend radius of 0.9 in. and has life cycle that exceeds 10,000,000 repetitive flexing. Rated for radiation exposure, cable is resistant to chemicals, acid, oils, alcohol, and ozone.

Aimtec, Inc.    Dollard Des Ormeaux, QC H9G3B9  Canada
Aug 14, 2009 Supplied in SMT packages, all models of series AM2B-NZ(DIP16) and select models of series AM2L-NZ(SMD) feature I/O isolation of 6,000 Vdc or equivalent of 3,000 Vac isolation for AC applications. Associated safety factor provides protection against channel-to-channel or cross-channel interference. Both series feature nominal input voltages of 5, 12, and 24 Vdc, stepping up or down to output voltages of 5, 12, and 15 Vdc. Short circuit protection is standard on all outputs.

OSRAM Opto Semiconductor    San Jose, CA 95134
Aug 14, 2009 With typical luminous intensity of 1.9 cd at 20 mA, TopLED Black Series with lens suits display applications with high ambient lighting conditions. Black package ensures there is hardly any reflection from incident light, and thin-film chip ensures high luminous efficiency. Available in red and yellow, units have beam angle of 60°. Targeted applications include information displays for traffic and public transportation systems and price changing displays.

C&K Components    Newton, MA 02458
Aug 14, 2009 GDS Series micro-miniature, side-actuated detect switches can be actuated from either X or Y axes. They offer maximum actuation force of 30 g, mechanical and electrical life of 100,000 cycles, operating in -20 to +70°C temperatures. Contact rating is 1 mA at 5 Vdc, with maximum initial contact resistance of 1 W and minimum insulation resistance of 100 MW between adjacent contacts. RoHS compliant switches are pick and place compatible and come in tape and reel packaging.

Binder-USA, LP    Camarillo, CA 93012
Aug 14, 2009 Available with dia of 14 mm, M9 metal connectors feature internal iris spring for conection between cable shield and connector body. This allows installation of braided or metal foil shield with 360° protection from electromagnetic interference. Both male and female connectors are offered with 2, 3, 4, 5, 7 and 8 gold-plated contacts, and cable outlet accepts cable dia from 4-5.5 mm. Connectors have IP67 rated connection, preventing ingress of liquids and debris.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 14, 2009 Supplied in 5 x 6 mm QSOP, iCoupler® ADuM744x series can isolate 4 channels of data and power. Products are available in various configurations with multiple channel-direction options and 1-25 Mbps data-rate options. Operating from 3.0-5.5 V supply, they can reduce board space by as much as 70% and incorporate input glitch filter that protects against extraneous noise disturbances. Suitable applications include those that need only up to 1 kV rms isolation.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 14, 2009 ADP2118, 3 A step-down, dc-dc synchronous regulator, includes low on-resistance switching FETs and features internal loop compensation, power-good indicator, precision enable, tracking, and synchronization to simplify design of POL power systems. It features 600 kHz or 1.2 MHz of fixed switching frequency and operates from 2.3-5.5 V range. Output voltage is adjustable from 0.6 V to input voltage, and it is available in preset output voltage options of 3.3, 2.5, 1.8, 1.5, 1.2, and 1.0 V.

EAO Switch Corp.    Milford, CT 06460
Aug 13, 2009 With behind-panel depth of 44 mm, Series 71 is suited for space-restricted control panels. Switches offer colored lenses with choice of illuminated symbols including on/off design, plus ring and center spot illumination. Aluminum dome lens is also available in variety of colors for flush-mounting actuators. Suitable for voltages ranging from 5 Vac/10 mA to 250 Vac/3 A, switches are protected to IP65 from front for use in general industrial environments.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 13, 2009 Integrating iCoupler® digital isolation technology and isoPower® DC-DC converter, which can operate at 5.0 or 3.3 V, iCoupler® ADuM640x Digital Isolators each provide quad-channel data isolation and 500 mW power isolation in single unit. Housed in 16-lead SOIC package, devices offer 5 kVrms medical-grade isolation for patient monitoring and other medical equipment, and include thermal shutdown feature to ensure safe operation.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 12, 2009 Supplied in 4 x 4 mm TQFN package, MAX14521E features ±15 kV ESD protection and utilizes inductor-based boost converter to generate 300 VP-P (max) voltage for optimal electroluminescent (EL) lamp brightness. I²C interface is included for adjusting settings such as output voltage, frequency, boost frequency, and waveform shape, while acoustic-noise-reduction circuit enables quiet EL backlight operation as well as bright, efficient output. Driver allows independent control of each lamp.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 12, 2009 With output current up to 2.5 A and 0.5 A, respectively, Models VO3120 and VO3150A each consist of LED optically coupled to integrated circuit with power output stage operating from 15-32 V. Units are suited for directly driving IGBTs with ratings up to 800 V and 50 A for VO3120 and 20 A for VO3150A. Offered in lead-free and RoHS-compliant packages, drivers feature low power consumption of 2.5 mA and max ambient operating temperature of +110°C.