Newport Corp.    Irvine, CA 92606
Jan 23, 2009 Featuring 36 x 60 in. footprint, PV IsoStation(TM) Vibration Isolation Workstation features storage and shelving for instruments and worksurface that minimizes light reflectivity. It includes RG series, 3 x 5 ft breadboard with surface that has durable black matte finish and ¼-20 hole pattern on 1 in. centers. Instrument rack is constructed of welded heavy gauge steel. Workstation frame is enclosed on all sides except rear, with 2 doors opening toward front of unit.

Snake Creek Lasers    Hallstead, PA 18822
Jan 23, 2009 Constructed of machined and anodized aluminum, water-resistant Prolight-G makes possible illumination and visualization of objects at distances beyond reach of traditional incandescent bulbs and LED-based flashlights. Unit features continuously variable cone-angle setting to accommodate short-distance illumination tasks. It comes with push-button tail-cap switch, lanyard, and one CR-123 Lithium battery.

JKL Components Corp.    Pacoima, CA 91331-2376
Jan 23, 2009 Used with standard or high power LEDs, Custom Silicone Lenses can focus, shape, or confine light output. Thermal stability and UV resistance make them suited for harsh and high temperature applications. With Shore hardness ratings from 25-80 and resistance to compression, aging, and ozone, lenses are compliant with aircraft and automotive quality and environmental standards. They are available installed on LEDs or can be molded to custom configurations.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 23, 2009 Finger-proof CROWN LINE bus bar system consists of extruded profile holding 2 solid copper conductors; power is supplied to conductors using quick connect color-coded RAPID LOCK right angle sockets. Option to vary conductor thickness provides flexible design up to 2 m in length, with ability to pre-form conductors to fit into awkward envelopes, thereby maximizing available space for essential equipment. Circuit breaker connector can be mated to busbar at any location along its length.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 23, 2009 Supplied in 16-pin, 3 x 4 mm TDFN package, AAT3691 regulates battery charge voltage and current for 4.2 V lithium-ion battery cells used in portable systems. Integrated over-voltage protection (OVP) up to 28 V offers response time under 1 µsec, and IC supports inputs from AC adapters as well as USB ports across 3.0-6.75 V (typ) range. Charger intelligently assesses which input source offers minimum charging time and modifies charge path accordingly.

ELB Electronics    Arcadia, CA 91006
Jan 22, 2009 Available in 2- or 3-lamp models, ELB Plus T8 32 W Dimming Ballast provides continuous light level dimming between 100-10% and allows facility managers to set ballast maximum and minimum light level output. Unit is equipped with built-in line voltage protection and 0-10 V control can be wired as Class 1 or Class 2 circuit. In addition to complying with ASHRAE 90.1 requirements for load reduction, unit meets ANSI standards C82.11-1993 and CD82.41-1991 and is UL-listed.

Hewlett Packard    Houston, TX 77269-2000
Jan 22, 2009 Models T750 G2, T1000 G3, and T1500 G3 protect computer equipment and critical data against damage due to inconsistent/fluctuating power in SMB, remote office, and retail environments. Line-interactive units, featuring buck and boost voltage regulation, respectively offer 750, 1,000, and 1,400 VA power ratings. Along with front panel display and battery management technology, each model comes with support for prioritized shut-down of attached devices and Network Transient Protection.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Jan 22, 2009 Offering momentary and latching switching, RoHS compliant BT Series comes in 7 single LED colors and 6 dual LED colors, with round, square, or no frame with 9 cap style options. Cap colors come in semi-transparent, transparent, and opaque styles with 10 laser etching choices. Electrical rating is 100 mA at 30 Vdc, contact resistance is less than 50 MW max, dielectric strength is 500 Vrms min, and switch is rated for 10,000 cycles. Operating temperature range is -40 to 85°C.

Alpha Source    Milwaukee, WI 53223
Jan 22, 2009 Designed to make unplugging safer for healthcare professionals, RingPlug is built with 6 o'clock and 9 o'clock angle configurations. It features ergonomic design that minimizes cord damage and emphasizes safer way to unplug cords. Cord is UL approved for hospital use on equipment such as defibrillators.

Littelfuse, Inc.    Des Plaines, IL 60016
Jan 22, 2009 Compact 215 Series Fuses come in 15, 16, 20 and 25 A ratings for up to 250 Vac service. Ceramic body, time-lag fuses are suited for use in power supplies, white goods, air conditioner compressors, and other high-amp equipment that needs protection against high fault-current conditions. RoHS compliant fuses can interrupt currents as high as 500 A at 250 Vac under fault conditions, and are recognized under UL and CSA component programs.

Emerson Network Power    St. Louis, MO 63136
Jan 22, 2009 Liebert PSI-XR provides 5+ min of battery backup at full load, with optional external battery cabinets for extending runtime. Configured at 110/120/127 Vac with range of output capacities, it offers remote communications and shutdown options for network closets, IT rooms, and small data centers. Also available, Liebert PSA provides up to 5 min of battery backup at full load for small office computers and electronic equipment. Various output capacities are available for 120/230 Vac models.

ERNI Electronics, Inc.    Midlothian, VA 23112
Jan 22, 2009 UL/CSA approved M8/M12 distribution boxes feature IP65/IP67 protected housing that withstands oil, lubricants, and vibration. M8 modules are available with 3- and 4-pin sockets, while M12 modules come with 4- and 5-pin sockets (A coded). Control level is connected by pre-assembled hybrid trunk cable, which acts as both power supply and data link for sensors and actuators connected to I/O box. All boxes utilize LEDs to display status and operation mode of I/O ports.

Semtech Corp.    Newbury Park, CA 91320
Jan 22, 2009 Featuring separate 28 V transient voltage suppressor (TVS) diode, RClamp3654P protects VBus against fault conditions when standard USB port is used for charging battery. It offers transient ESD protection for high-speed data lines to IEC 61000-4-2 15 KV (air) and 8kV (contact), EFT protection to IEC 61000-4-4 40A, and protects USB DP, DM, and ID pin up to 5.5 V. Device comes in leadless 6-pin SLP1616P6 L6 package and meets China's new USB charging requirement YD-T-1591-2006.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 22, 2009 Connecting one device between 2 other devices or networks for each of its 8 channels, Model 7465 IP addressable RJ45 A/B Switch enables independent control of each channel via Ethernet 10-Base-T connection or manually via 8 front-panel pushbuttons. Switched ports are transparent to all data and switch continues to pass data in last position during power loss. Utilizing Telnet commands, switch allows user to remotely select or query switch position and lockout front-panel pushbuttons.

Phihong USA    Fremont, CA 94539
Jan 21, 2009 Suited for OEM applications, PSA18R-120P is available with 4 interchangeable AC plugs that make it compatible with power outlets worldwide. This 18 W interchangeable plug adapter complies with ENERGY STAR® EPS 2.0 requirements as well as EISA no-load and active mode energy efficiency requirements. Measuring 2.82 x 1.97 x 1.31 in., product is Class II double-insulated, features Class B EMI compliance, and has no-load power consumption of less than 0.3 W.

IDEC Corporation    Sunnyvale, CA 94089-2209
Jan 21, 2009 Equipped with 4 built-in analog inputs, 4 counter analog inputs, and up to 200 memory blocks, FL1E SmartRelays can manage automatic lighting, access control, watering systems, pump control, or ventilation systems. Optional external message display panel with 4 x 12 backlit LCD provides visual interface to view system status at any time. Display is bargraph-capable and includes scrolling feature that allows up to 24 character messages to be shown on screen.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 21, 2009 Pathway® Model 7385 allows sharing of one DB9 interface device among 4 other devices with resistance between common port pins and corresponding current position pins of less than 0.8 W. This A/B/C/D switch has no local front panel controls, and DB9 remote port, located on rear of unit, accepts RS232 serial data ASCII commands for monitoring and control of switch position. All 9 pins of DB9 interface are switched, and switch ports are transparent to data format.

Lighting Services Inc    Stony Point, NY 10980
Jan 21, 2009 Track Adaptor -00FIT is low-profile Lexan adapter for 1- and 2-circuit, heavy-duty .070 extruded aluminum LSI Track. It features on/off switch and mechanical safety interlock enabling positive non-energized making/breaking of fixture contacts. Available in clear anodized, black, white, silver, and graphite or custom painted to match fixture, UL-listed device comes in 4, 8, and 12 ft field cuttable lengths.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 21, 2009 Designed to support connections between 4 devices or peripherals and ports A, B, C, and D, Model 7286 allows selection of switch position, normal or crossover, via front panel pushbutton or remotely via dry contact closure to remote DB9 port. Users can remotely monitor switch position or utilize remote contact closure to lockout front panel pushbutton controls. All 25 signals of interface are switched and ports are transparent to all data.

Linemaster Switch Corp.    Woodstock, CT 06281
Jan 21, 2009 Supplied with polymeric plastic or zinc cast cover, Aquiline switches are available in single, twin, triple, and quadruple models featuring SPDT, DPDT, or 2-stage operation. Traction during medical and light-duty application is ensured via non-skid basepad and raised ribs on treadle. Options include waterproof interior switch, rated to IP68; USB; wireless; special labeling or paint finish; and special cordsets to customer specifications.