Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 28, 2010 Pathway ® Model 7387 single channel RS232 DB25 A/B switch allows sharing of single interface device among 2 other devices and may be switched manually, remotely or automatically. Two position unit can be programmed via DIP switch settings to use either RD signals or DCD signals as triggers for automatic switching. All switched signals are passed via latching copper contact relays that maintain their position and continuity even in event of power loss.

Masoneilan Division, Dresser Flow Solutions    Avon, MA 02322
Jan 28, 2010 Integrating level transmitter, controller, and switch functions in single device, 12400 Series provides process control for refining, petrochemical, and energy industries. Unit includes smart filtering, HART® communication protocol compatibility, optional 4-20 mA analog output, and ability to record and store recent data continuously in non-volatile memory. Controller meets SIL2 compliance and is certified in full hazardous areas, including ATEX, IECEx, FM, and FMc/CSA.

Linear Technology Corp.    Milpitas, CA 95035
Jan 28, 2010 Supplied in 8-lead MSOP and 3 x 3 mm DFN packages, LT6350 is 33 MHz rail-to-rail input and output ADC driver that settles to 16 bits in 350 ns. Each of 2 internal op amps achieves 1.9 nV/√Hz input-referred noise density, resulting in 8.2 nV/√Hz total output-referred noise. Operating on 2.7-12 V supply and consuming 4.8 mA, driver enables ADCs to achieve better than 110 dB SNR over 1 MHz bandwidth. At 100 kHz, it achieves -102/-97 dBc HD2/HD3 typ.

Streamlight, Inc.    Eagleville, PA 19403
Jan 28, 2010 To produce uniform flood pattern, E-Flood® LiteBox® and E-Flood® FireBox® each use 6 LEDs and wide pattern parabolic reflectors. On high setting, units provide 4,000 candela peak beam intensity and 615 lumens measured system output over distance of more than 400 ft, and on low setting, they provide 2,150 candela peak beam intensity and 330 lumens output. Both types come in standard and vehicle mount versions, and use 6 V, 12 Ah SLA battery, which is rechargeable up to 500 times.

Fairchild Semiconductor    San Jose, CA 95134
Jan 28, 2010 Supplied in 1 x 1-4 mm WL-CSP, IntelliMAX(TM) FPF110x series integrates analog switch control functionality and offers 35 mW RON typ. It allows direct load switch interconnection into most MPUs for software-transparent operations. Based on power CMOS silicon, series eliminates need for additional input capacitors and offers protection through integrated slew rate control. Slew rate options of 65 and 130 µsec meet system demands while promoting stability over 1.2-4 V operating range.

Stewart Connector    Glen Rock, PA 17327
Jan 27, 2010 Designed to promote optimal port density in space-constrained telecom and premise wiring applications, MRJ21® Cable Assemblies simultaneously support VoIP, PoE, and GbE while offering ability to connect 24 twisted pairs with one connection. Category 5e devices offer choice of straight, 45° angle, or multiple RJ45 connectors. Board-mount receptacle features board lock design for PCB strain relief, while cable assemblies provide offset jackscrews to ensure positive latching.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 27, 2010 Series TSX3 Digital Temperature Switch controls compressor, fan, and defrost in refrigeration applications. It includes digital input that can be used to remotely trigger defrost cycle, monitor cooler door status, or act as external alarm. Real-time clock allows for HACCP logging of temperature alarms caused by temperatures out of set limits or loss of power. For programming multiple units, model TS2-K configuration key can be used to downloaded parameter settings.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jan 26, 2010 Supplied in 24-pin, 7.8 x 6.4 mm TSSOP, bq3060 turns lithium-based battery into smart battery that measures and maintains accurate record of available capacity, voltage, current, temperature, and other critical parameters. Safety is also ensured via SHA-1 authentication as well as short-circuit and discharge protection. Consuming less than 69 µA, IC supports 2-wire SMBus 1.1 interface with 400 kHz programming option and also offers compensated end-of-discharge voltage gauging.

Turck USA    Minneapolis, MN 55441
Jan 26, 2010 Intended for machine power distribution and motor control, D-Size (1-3/8 inch) powerfast(TM) modular wiring system includes 3- and 4-pin cordsets, receptacles, and tees that provide up to 600 V and 30 A. Additional powerfast components include field wireables, closure caps, and tee with integrated cable drop. Through use of standard and reducer tees, it is possible to use quick disconnect system to distribute power to multiple field devices along one main trunk cable.

American Bright Optoelectronics Corp.    Chino, CA 91710
Jan 26, 2010 Designed to replace T-8 fluorescent tubes in large-scale retail refrigerators and freezers, second-generation SimpleTube LED Replacement Lamps provide efficacy up to 61 lumens/W. Color quality and consistency will not degrade appreciably over 50,000+ projected life of product. Offered in ANSI color bins, toxin-free lamps are UL listed and RoHS-compliant. THD correction version is available to comply with emerging regulations and proposed DOE specifications.

Advanced Power Solutions    Pleasanton, CA 94588
Jan 26, 2010 Measuring 4.33 x 2.13 x 1.30 in. with suffixes to designate preferred mechanical/AC input package, 40/50/60 W external power supplies are available in 3 different packages: wallmount with detachable AC plugs; desktop with 2-prong AC inlet; or desktop with 3-prong AC inlet. Models offer any voltage setpoint ranging from 5-48 Vdc and can be terminated with any selection of DC connector for OEM applications. Supplies feature universal AC input and EN55022 Class B Emissions.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 26, 2010 Designed for telecommunication and data communication industries, MADISON CABLE brand Cat 5E miniature trunk cable is available in shielded or unshielded configurations, eliminates cable congestion - offering flexible, easy-to-route interconnection. Reduced diameter allows for routing within, or between, cabinets and frames for central offices or telecommunication closets. UL/CSA approved customizable units meet TIA/EIA 568, ISO 11801 industry standards, and ADSL/VDSL2 and GbE requirements.

Diodes, Inc.    Westlake Village, CA 91362
Jan 26, 2010 Housed in low-profile DFN package, 1 A linear mode, constant-current Model DLD101 is suitable for flashlights and lighting in emergency, garden, and poolside applications. By integrating base accessible pre-biased transistor, LED driver incorporates biasing resistors on chip, so LED current is set via single external resistor without additional boost resistor. For pass element, high drain current 60 V N-channel MOSFET is used instead of bipolar transistor.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jan 25, 2010 Available in 7-lead, 10.16 x 13.77 x 4.57 mm packages, SIMPLE SWITCHER® LMZ Series supports common 3.3, 5, 12, and 24 V input voltage rails. Units operate from -40 to 125°C and feature thermal resistance temperature of 20°C/W. With low EMI, power modules meet requirements of EN55022 (CISPR22) Class B radiated emission standard. Heat dissipation and large exposed-bottom pad allow for operation in high ambient temperatures without need for airflow.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jan 25, 2010 Based on 600 kHz synchronous buck topology, 6 A Model OKR-T/6 and 10 A Model OKR-T/10-W12 offer power conversion efficiencies of 93% and 92% respectively. Both operate from input voltage range of 4.5-14 Vdc, are able to drive up to 200 µF capacitive loads, and offer programmable output voltage of 0.591-6.0 Vdc. Housed in 0.41 x 0.65 x 0.3 in. SIP package with through-hole mounting, miniature devices feature over temperature and over current protection, On/Off control, and UVLO.

RECOM Power Inc.    Brooklyn, NY 11201
Jan 25, 2010 REC 3.5 and REC 6 families of dc-dc converters have power ratings of 3.5 and 6 W and offer 10 kVdc and 5 kVac isolation, respectively. Re³-Inforced transformer technology with triple isolated windings ensures low leakages required for medical applications, while permanent short circuit and overload protection meets EN, CSA, and CB specifications. Max ambient operating temperature without de-rating and with natural convection cooling is at +85°C for REC 3.5 and +75°C for REC 6.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 25, 2010 Promoting system reliability and arc flash protection, AKD-20 utilizes EntelliGuard® G low-voltage circuit breakers, available from 800-5,000 A with fault ratings up to 150 kAIC, and EntelliGuard TU Trip Unit. Optimized footprint can use 22, 30, or 38 in. section sizes when possible, and lack of ventilation openings protects operators from vented hot ionized gases. Also included, ZSI system lets multiple breakers protect their zones instantaneously while maintaining full selectivity.

Eurotech Group    AMARO (Udine) 33020  Italy
Jan 25, 2010 DuraNET 1268 GbE Switch, suited for aircraft, tactical ground vehicles, and maritime assets, handles MIL-STD-810F environmental and MIL-STD-1275/704/461 vehicle power and EMI conditions. Fully submersible with no moving parts, compact Layer 2+ GbE switch subsystem features 10 triple-speed 10/100/1,000 Mbps ports for connecting IPv4 and IPv6 compatible computing devices. Its MCU allows local/remote control and monitoring and unit can operate standalone or with Layer 3 mobile routers.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 25, 2010 Designed for LCD TVs, Models AAT2400/2401 are master/slave devices that operate from regulated 12 or 24 Vdc power supply. AAT2400 supplies 40 V rail to drive 10 series LEDs with typical VF of 3.6 V with up to 100 mA. Sixteen current sinks split between master and slave devices provide constant current drive for up to 160 white LEDs. Eight-bit dot correction register compensates for variations in LED brightness during LCD setup, while two 12-bit registers control grayscale current and delay time.

Richtek Technology Corporation    San Jose, CA 95128
Jan 25, 2010 Supplied in 40-lead VQFN package, RT9911 provides complete power-supply solution for hand-held devices. It integrates one selectable Boost/Buck DC-DC converter, one step-down DC-DC converter, one main step-up converter, one PWM converter for CCD positive voltage, one inverter for CCD negative voltage, and one white LED driver for LCD backlight. Each DC-DC converter has independent shutdown input, and RoHS-compliant product offers up to 1.4 MHz adjustable switching frequency.