Power-Save Energy Co.
San Luis Obispo, CA 93401
Sep 11, 2008 Designed as direct replacement of existing wall switch, Fluorescent Light Manager controls all non-dimmable and dimmable CFLs, as well as fluorescent linear tubes with non-dimmable ballasts. Initial adjustment for size of light load and dimming can be preset to customer's preference. Unit is suitable for single-phase, 120 V/60 Hz, 300 W loads and meets safety standards for Solid-State Dimming Controls, ANSI/UL 1472 First Edition, and CSA-C22.2 No. 184-96.

Line Lite International B.V.
Amsterdam 1075 AS  Netherlands
Sep 11, 2008 Including 4 and 8 W versions that deliver 200 and 300 lumens of warm white light, respectively, EcoDIM Series LED lamps can be dimmed smoothly from 0-100% by utilizing PWM circuit to control the current to LED when input is varied by triac dimmers. Available in 2,800 and 6,000 K temperature versions, units feature 30°C body temperature on glass, do not contain mercury or other chemical waste, and do not produce any greenhouse emissions or CO₂.

Quintech Electronics and Communications Inc.
Indiana, PA 15701
Sep 11, 2008 Utilizing Q-Route technology to provide signal path redundancy and auto reroute capabilities, QRM 16 x 16 RF Matrix Switch features operating frequency range of 50-2,500 MHz. It also offers manual and automatic AGC modes with range of -15 to 16 dB in 0.5 dB steps with optional LNB Power and individual port control to support all modulation formats. Front Panel LED's allow monitoring of power supply and alarm status information.

Calex Mfg. Co., Inc.
Concord, CA 94520
Sep 11, 2008 With input from 15.5-36 Vdc, HU-28 Hold Up and HUL-28 Hold Up Light Models protect Calex dc/dc converters against brown-out and temporary power loss conditions. During stand-by, module charges hold up capacitors to 45 V, and when tripped, module stops charging capacitors and connects them to Vout pins. Along with up to 200 W of hold up output power, features include 5 µsec response time, 310 kHz switching frequency, 40 mA peak to peak reflected ripple, and -40 to 100°C operating range.

Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Sep 10, 2008 DIN rail mounted, EZ Jump terminal blocks provide 2 locations and housing insulation for PTC jumpers. Characteristics include grey color for multiple product compatibility, RoHs compliant materials, and housings molded of UL94V0 polyamide. Blocks are available in single, multiple, functional, and fuse levels as well as screw clamp and spring clamp wire terminations. Terminal blocks and PTC Easy Bridge System can be ordered as individual items or as complete assembly.

Pilz Automation Safety L.P.
Canton, MI 48187
Sep 10, 2008 Designed to monitor voltage, current, temperature, and phase sequence, PMDsigma Relays enable users to set values via rotary knob and save them to chip card. Data remains flexible and can be copied to other units. Model PMD s10 monitors true power of motors with rating up to 11 kW, and can process frequencies from 0-1,000 Hz, making it suitable for dc and ac motors as well as frequency-controlled drives. With relays, users can implement early warning system for hazardous plant conditions.

GlacialTech Inc.
Taipei   Taiwan
Sep 10, 2008 Accepting input voltage of 90-240 Vac and using LED emitters that consume just 11 W, LED BR30 Globe can be used for general everyday use from indoor applications to spotlighting and street lighting applications. Featuring -20 to +40°C operating temperature range with beam angle of 120°, it measures 95 mm in dia and 127 mm in length and weighs 0.3 kg. Cooling structure of heatsink is optimally designed to keep more than 50,000 hr longevity of device intact, while maintaining full brightness.

Clore Automotive
Lenexa, KS 66215
Sep 10, 2008 Including Models PI10000X, PI15000X, and PI20000X with power ratings of 1,000, 1,500, and 2,000 W, respectively, SOLAR Power Inverters feature SOLAR Sonic Compression technology that utilizes modified sine wave design to deliver clean, reliable power from 12 V power source to wide variety of power equipment and appliances. All models utilize industrial grade components and have temperature-activated fan control to eliminate unnecessary draining of power source in standby mode.

Power Integrations, Inc.
San Jose, CA 95138
Sep 10, 2008 Designed to meet ENERGY STAR® 2.0 Specifications for external adapters, TOPSwitch-HX AC-DC Power Conversion ICs feature L-shaped lead-bend that allows eSIP package to lie flat against PCB with heatsink pad facing upwards. Devices stand 2 mm above board, providing space for heatsink and enabling slender power supply designs from 20-100 W. Applications include adapters for notebook computers, as well as power supplies for LCD monitors and flat-panel TVs.

Power Integrations, Inc.
San Jose, CA 95138
Sep 10, 2008 Based on LinkSwitch-II AC-DC switched-mode power conversion ICs, reference design RD-157 complies with China Charger standard for constant-voltage and constant-current (CV/CC) cellphone chargers. Providing 5.5 W @ 5 V ±250 mV, RD-158 charger suits high-end cellphones, PDAs, and other portable devices. While able to withstand 10 kV surge, RD-159 adapter for cordless phones seamlessly and reliably provides power to phone with accuracy of ±250 mV.

Picor, a subsidiary of Vicor Corporation
North Smithfield, RI 02896
Sep 10, 2008 Targeting railway and transportation segment, Max, Mini, and Micro Series includes 27 models with output powers ranging from 75-400 W and 9 output voltages of 3.3, 5, 8, 12, 15, 24, 28, 36, and 48 V. Units meet operating voltage requirements for EN50155 as well as EN50155 requirements for shock, vibration, and temperature. Optionally available in RoHS-compliant models, modules come in 5 environmental grades with 6 pin options and 3 baseplate options.

3M Co., Electronic Products Div.
Austin, TX 78726
Sep 10, 2008 Designed for internal and external cabinets, Round, Jacketed, Flat Cables Series 3758 and 3896 enable mass termination to broad line of insulation displacement connectors. Series 3758 1.27 mm pitch PVC insulated cable is useful for long transmission distances due to its 26 AWG wire size and is available in conductor counts up to 64. Offered in conductor counts up to 100, 3896 series 30 AWG stranded PVC insulated cable allows for high signal density due to its 0.635 mm centreline.

Hitachi America Ltd., Industrial Systems Division
Tarrytown, NY 10591
Sep 10, 2008 L300P Series inverter features IPU-PSM option board which adds Pump Sleep Mode functionality to standard built-in PID function. IPU-PSM allows for specification of lower limit on inverter output frequency, monitors system pressure feedback via inverter's PID Deviation parameter, features 2 digital inputs to force inverter to wake and to disable the sleep function, can be configured by means of 4 inverter parameter settings, and requires no additional hardware.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Sep 10, 2008 Usable with 18-22 AWG solid wire, 18-20 AWG pre-bond stranded wire, or 18 AWG stranded wire, SMT Poke-In Connectors suit PCB-based LED strings, lighting controls, and other nonlighting applications. They come in 1 or 2 positions, with single-position connectors offered in white or black to facilitate polarity identification. Available in tape and reel packages, units incorporate tin over nickel plated copper alloy contacts with UL94-V0 rated high temperature thermoplastic housing.

Phihong USA
Fremont, CA 94539
Sep 09, 2008 Suited for mobile, portable, and wireless communication applications, PSM08R-050(M)-R is available with 4 interchangeable clip adapter plugs for worldwide compatibility. Supporting 90-264 Vac input, double-insulated 8 W adapter is rated +5 Vdc/1.6 A, provides short circuit as well as over voltage protection, and also meets ENERGY STAR® IV requirements and has received cUL/ULus, TUV, SAA, CCC, C-Tick, and CE approvals.

Coleman Cable, Inc.
Waukegan, IL 60085
Sep 09, 2008 X-Treme Box(TM) rugged worksite power distribution center has stackable roll cage design to simplify transport in contractor's vehicle. Cage is constructed with tubular steel frame that is tapered on top to allow several boxes to be vertically stacked when being moved from one jobsite to another. OSHA and NEC Compliant, ETL Listed system includes 6 NEMA 20A locking or straight-blade receptacles, 1 NEMA 30 A locking receptacle with overload protection, and 50 A inlet and outlet.

Picor, a subsidiary of Vicor Corporation
North Smithfield, RI 02896
Sep 09, 2008 Featuring 10-36 V input range, Maxi Series MIL-COTS 28 Vdc Maxi Series includes models that span 8 output voltages from 3.3-48 V and offer max power of 200 W. Four operating temperature grades are available, including -55°C, and input range allows designers to specify one converter to operate in both 12 and 24 V vehicle systems. Full, void-free encapsulation enables use in harsh environments, and baseplate options include slotted, threaded, and through-hole.

Ideal Industries, Inc.
Sycamore, IL 60178
Sep 08, 2008 With dimensions of 4.42 x 12.92 x 5.78 in., Stripmaster Model 45-940 automatically measures, strips, and cuts wire insulations from No. 30 AWG to No. 8 AWG. Adjustable strip length control, combined with internal automatic triggers, assures accurate strips from .060-1 in. To keep track of production lot quantities and total strips, unit has built-in, resettable cycle counter, along with electronic cycle control with LCD display that monitors settings of blade openings and strip lengths.

Linear Technology Corp.
Milpitas, CA 95035-7417
Sep 08, 2008 Operating from supplies up to 38 V, LTC4447 drives upper and lower power N-Channel MOSFET gates from rail-to-rail over 4-6.5 V range in synchronous rectified converter topology. It sinks up to 5 A, sources up to 3.2 A, and can also drive multiple MOSFETs in parallel for higher-current applications. Along with integrated bootstrap Schottky diode, features include adaptive shoot-through protection, 3-state PWM input, and separate input logic supply.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Sep 08, 2008 Enabling electronic devices to be simultaneously powered and charged via AC-to-DC adapter or through USB port, MCP73871 Li-Ion/Li-Polymer Charger is suitable for portable products such as GPS units, phone chargers, PDAs, and Bluetooth® headsets. Single-chip charger features integrated pass transistor and numerous battery and termination voltage options. Housed in 20-pin, 4 x 4 mm QFN package, device delivers accurate voltage regulation of 0.5%.