New Electrical Equipment & Systems Products

Self-Regulating Heating Cable has flame-retardant TPE jacket.

Automatically varying its heat output with changes in surrounding temperature, SR TraceÃ-® provides freeze protection for plastic or metal pipes and vessels in ambient temperatures down to -40Ã-ºF, and maintains liquids in pipes at constant temperature. UL listed and CSA certified, waterproof cable is available in power densities of 3, 5, and 8 W/ft at 50Ã-ºF, for 120 or 240 Vac...

Metallic Fiber Optic Connectors withstand harsh environments.

Featuring all-metal housing, LC2+ Optical Connectors come in simplex and duplex models for multi-mode, single-mode, and APC applications. Latch retention system and high-temperature strain relief boot work in conjunction with EP aerospace-grade fiber optic cables and sealing features to protect from moisture propagation going through connector to active devices. Interconnects are fully compatible...

DC Gearmotor develops 196 lb-in. torque at 12 rpm.

Accepting any 24-28 Vdc source, including battery power, Model MMP-TM55-36-28V GP52-195 measures 2.14 in. dia x 7.75 in. long, and has keyed output shaft of 12 mm dia x 25 mm long. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. Weighing 4 lb, reversible IP54-rated gearmotor requires 2.1 A at 28 Vdc to generate full load torque, making it suited for...

Point-of-Load DC-DC Converter suits space environments.

Characterized to 100 krad total dose radiation, SVGA Series point-of-load DC-DC converter steps down voltage at point of use in distributed power system. Regulated, nonisolated converter operates at frequency of 250 kHz, offers power density of >100 W/in.3, and provides up to 94% efficiency. Output power is up to 10 A or 33 W and product also features short circuit protection. It is packaged in...

Pressure Vessels & Their Components

This white paper provides an in-depth look into custom fabricated pressure vessels and their components.

Christie Model C2536D 25 Amp Multi-Voltage Industrial Charger

Clore Automotive introduces the C2536D, a 25 amp multi-voltage battery charger, from Christie. This versatile unit provides up to 25 amp charging in several voltage settings (12V/24V/32V/36V) and its heavy-duty construction is suitable for a variety of fleet, industrial and specialty applications. The unit features continuous duty charging capacity up to 25 amps, with three rate settings (low,...

WAGO WINSTA-® Pluggable Connectors Disconnect Under Load

Germantown, WI - March 2010 - WAGO Corporation's 770 Series WINSTAÃ-® MIDI and 890 Series MINI Pluggable Connectors are UL Recognized 600V devices for disconnection under load. This enables WINSTAÃ-® MIDI and MINI to serve as a safe means of disconnection for hot swappable components (e.g., small motors, LED drivers, pumps, or actuators). Its touch-safe design protects against hazardous...

Battery Holder comes with sliding covers and switch.

Model BK-6049 offers 12 V output with 8 AA alkaline batteries in series or 9.6 V with rechargeable batteries. Rated for 0.5 A, sliding switch in case is recessed below surface to prevent accidental activations. Featuring snap locking tabs, dual sliding covers allow for quick battery changes without use of tools. Unit has operating temperature range between -40Ã-

High Frequency Test Cables come in standard and custom lengths.

MIL-DTL-17, type IX specified precision test cables feature high-grade, passivated, stainless steel SMA males with PTFE insulators and are configured for low loss and low VSWR. Electrical features include 50 W impedance, 23.8 pF/ft capacitance, 85% Vp, shielding effectiveness better than -95 dB, operating temperature range of -55 to +200Ã-

Universal Adapter System Kit supports field/bench technicians.

Unidapt(TM) coaxial adapter system features universal adapter to join any 2 Unidapt(TM) adapters with standard coaxial interfaces. Seventy-four-piece RFA-4022 Unidapt(TM) Mega-Plus Kit helps in troubleshooting and testing 7-16 DIN, BNC, F, Mini-UHF, MCX, MMCX, N, RCA, reverse polarity SMA and TNC, SMA, SMB, TNC and UHF terminated devices. Kit contains universal tee, universal right angle adapter,...

Solid State Lighting Connector is RoHS compliant.

Utilizing insulation displacement technology, IDC SSL connector terminates 18-24 AWG solid and stranded wires on LED printed circuit boards. Available in 1, 2, 3, and 4 positions, UL 1177 specified connector is offered in SMT/thru-hole and closed-end/feed-thru configurations. Product is built with 94 V0-rated high-temperature resistant thermoplastic. Closed-end version features viewing window to...