Amphenol Corp., Amphenol Aerospace    Sidney, NY 13838
Dec 22, 2004 Amphe-PD(TM) Connectors include RADSOK® terminals, which feature stamped hyperbolic grid and support 50-70 A continuous duty. UL listed at 69 A and CSA listed at 55 A, units have single-position RADSOK with molded socket shell or dual-position TUV touch-proof unit with V0 rating. Amphe-PD Series can connect to wires, busbars, and circuit boards.

Aliner Industries, Inc.    Taipei 242  Taiwan
Dec 22, 2004 Suited for applications up to 6 GHz, in-line SSMCX Connectors feature minimal height of 2.50 mm and length of 7.85 mm. Shock resistant, cable-to-cable units deliver VSWR of 1.30 max at 1–3 GHz and 1.5 max at 3–6 GHz. Insertion loss is -0.26 dB. Compliant with RoHS requirements, snap-on connectors are suited for high-density mobile electronic equipment such as GSP/PDA, mobile wireless AP, PC notebook, and GSM/GPRS modules.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Dec 22, 2004 Suited for indoor and outdoor applications, edge-lit LED Sign is shatter-proof, glass-free, and produced with unbreakable materials. It never leaks gas and is environmentally friendly. Using 18 Vdc, 9–10 W, sign features standard 12 in. character height. It includes on/off switch and is suited for hanging behind window. UL and CUL listed unit can flash or remain static, change colors, do animations, and spell out word vertically or horizontally.

3M Electrical Specialties Div.    Austin, TX 78726
Dec 22, 2004 Orange/Blue O/B+ Connector features wide range spring that accommodates two No. 22 AWG wires, three No. 12 AWG wires, or four No. 14 AWG wires. Small shell fits into tight spaces, while flexible skirt helps protect workers from contact with overstripped wires.

Waldmann Lighting Co.    Wheeling, IL 60090-6051
Dec 21, 2004 Model ESD Omnivue features conductive coatings and static dissipative materials and coatings, which eliminate static discharge. Three 9 W, 5,000 K compact fluorescent lamps provide 27 W of light from top and both sides of magnifier, or 18 W of side-to-side lighting. Three-diopter, fully rotational magnifier lens provides precise positioning to eliminate glare. Spring-loaded base and arm allow light adjustment.

NKK Switches    Scottsdale, AZ 85260-3420
Dec 21, 2004 Series G3T toggles and G3B pushbuttons feature Sliding Twin Crossbar contact mechanism for logic level switching reliability. Contacts are gold-plated and wiped clean with every actuation. Both series have bushing and housing constructed of one molded piece with rubber o-ring. Available as single- or double-pole, G3T toggles can be configured in 5 circuits, including momentary and maintained action, while G3B pushbuttons are offered in momentary circuits.

MULE LIGHTING, INC.    Providence, RI 02905
Dec 21, 2004 KES Series commercial/industrial emergency lighting units feature self-contained design that provides ac lockout and brownout protection. Hands-off battery design automatically recharges when necessary, and units can be adapted with self-diagnostics system. Drawing from battery power, automatic fixture delivers 90 min to 8 hr of operation time when power is lost. Able to run 10 remote light heads, 6 and 12 V models accommodate up to 3 glare-free lamp heads.

Woodhead Industries Inc.    Deerfield, IL 60015
Dec 17, 2004 Ultra-Lock Connector System contains distribution boxes and cord sets based on push-lock principal. Users push down to connect, and pull up to disconnect. Equipped with IP68-rated radial seal and interlock design, system features identical contact configuration to M12 industry standard connectors. Once engaged, it provides fail-safe connectivity, even under stresses of cable flexing, mechanical shocks, or machine vibration.

Anderson Power Products    Sterling, MA 01564
Dec 17, 2004 Offered in 10 connector housing types, PowerMod® HP connector series features touch-safe female housings, integral positive latches, and cable strain relief. IP 20 rated products accommodate wire sizes from No. 6–2 AWG and metric wires from 16–35 mm. They use Sterling contact technology and are rated for circuit interruption. With electrical rating of 125 A at 30º C temperature rise, products may be used in applications to 175 A.

Advance Transformer Co.    Rosemont, IL 60018 5625
Dec 17, 2004 Designed to accommodate metal halide and high pressure sodium lamps, e-Vision® 70 W IMH-70-DLF/DBLS and 100 W IMH-100-DLF/DBLS70 employ electronic circuitry and provide automatic lamp power control and lamp monitoring. IntelliVolt® multiple-voltage technology enables ballasts to operate at input voltages from 120–277 V, 50/60 Hz, while lamp wattage regulation optimizes lamp color stability over life and reduces lamp-to-lamp color variations.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Dec 17, 2004 Engineered to withstand severe weather and service situations, Fire Power Systems provide safe, temporary electrical power to equipment such as lighting systems and exhaust ventilation fans used by firefighting and emergency rescue services. Crush-proof design is water-tight, even when submerged in up to 6 ft of water. Products are customizable for applications such as emergency power, temporary lighting, electrical machinery, and controls.

Hubbell Lighting Div.    Christiansburg, VA 24073
Dec 17, 2004 TurboBaffleâ„¢ compact fluorescent baffled luminaires feature radial louvers inside that reflect light, but minimize glare. Virtual Source® optical system provides 45° symmetrical cutoff in all lateral planes. TurboBaffle is available in 6 and 8 in. apertures, with fixture depths between 4–5 in. Light output emanates from 13 W twin tube, 18 or 26 W quad tube, or 26, 32, or 42 W triple tube CFLs. Magnetic or electronic ballasts provide instant-on and are accessible below ceiling.

Belden    Richmond, IN 47375
Dec 17, 2004 Safe-T-Line Circuit Integrity Cables feature flame-retardant, low smoke, and zero halogen materials, ensuring continued operation of emergency warning systems for at least 2 hours in event of fire. In building installations, cables connect Fire Command Center to various zones in building. Available in shielded and unshielded versions, series consists of 24 multi-conductor, riser-rated cables that are 300 V rated and NEC-designated as CI cables.

Alkco Mfg. Co.    Franklin Park, IL 60131 8389
Dec 17, 2004 SoftGlo wall-recessed night-lights provide soft functional illumination at floor level, while presenting unobtrusive design that melds with architectural interiors. Choice of louvered or subtly regressed shields distribute light in no-glare direct/indirect pattern. Units feature 20-gauge galvanized steel housing. Frame and faceplate are stamped or die-cast aluminum or steel. Standard finishes include white, stainless steel, or painted matte aluminum.

d’ac Lighting    Mamaroneck, NY 10543
Dec 17, 2004 Available in suspended pendant and ceiling mount models, Dome Fixture is characterized by 11¾ in. high, dome-shaped, prismatic acrylic globe with polished trim ring along bottom circumference and narrow ringed top cap that serves as ballast compartment. Contemporary, light industrial aesthetic is suited for range of commercial interior applications. Fixture uses incandescent, halogen, triple or quad tube compact fluorescent, or metal halide lamps.

LAM Lighting Systems, Inc.    Santa Ana, CA 92704 6598
Dec 17, 2004 Imperial Collection includes pendant lights, ceiling lights, and ADA-compliant wall sconces. Pendant lights are characterized by broad domed shapes with bold aperture and pendant-rod trims. Wall sconces feature same design, but are turned on side in semi-spherical shape. All are constructed from aluminum and steel components. Illumination is provided by choice of compact linear fluorescent, compact fluorescent, incandescent, or HID sources.

ALLSCAPE    Santa Ana, CA 92704
Dec 17, 2004 Dual-lens Model SL-43-HPBB recesses into ground, leaving only heavy-duty, die-cast lens frame and external lens visible at ground level. Internal reflector adjusts through 25° of tilt and 360° rotation, allowing light to be aimed directly onto walls, columns, or signage. Illumination is provided by metal halide, fluorescent, incandescent, or high-pressure sodium sources. Compression-molded Rhinoliteâ„¢ housing offers resistance to UV rays and corrosive elements.

Quail Electronics    Livermore, CA 94550
Dec 17, 2004 Power strips, offered as part numbers 0310.PS6-6 and 0310.PS6-15, compliment green dot hospital grade power cords and are supplied with power cord lengths of 6 and 15 ft., respectively. Each features one NEMA 5-15P plug and 6 NEMA 5-15R receptacles, all rated 15A, 125 V. Products are designed to meet UL and CSA requirements for use in hospitals and medical offices.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Dec 16, 2004 XPression name badges use red LEDs for readability and contain micro magnet for attachment to shirt pocket. Up to 120 characters can be programmed for display via Windows-compatible PC software, and area is provided for displaying custom logo or web address. Xpression SC serial cable-programming model comes with badge, serial cable, cell battery, and XPression software CD. XPression IR model also adds IR transmitter.

STMicroelectronics    Lexington, MA 02421
Dec 16, 2004 Supplied in screw-mounted ISOTOP package, 4-terminal STE50DE100 hybrid emitter-switched bipolar transistor sustains collector-source voltage of 1,000 V and collector currents up to 50 A. Power dissipation is 160 W at 25˚C and max operating junction temperature is 150˚C. Due to cascode configuration and dedicated bipolar technology, device offers square reverse bias safe operating area, enabling it to work in hard switching topologies.