NKK Switches    Scottsdale, AZ 85260-3420
Dec 21, 2004 Series G3T toggles and G3B pushbuttons feature Sliding Twin Crossbar contact mechanism for logic level switching reliability. Contacts are gold-plated and wiped clean with every actuation. Both series have bushing and housing constructed of one molded piece with rubber o-ring. Available as single- or double-pole, G3T toggles can be configured in 5 circuits, including momentary and maintained action, while G3B pushbuttons are offered in momentary circuits.

MULE LIGHTING, INC.    Providence, RI 02905
Dec 21, 2004 KES Series commercial/industrial emergency lighting units feature self-contained design that provides ac lockout and brownout protection. Hands-off battery design automatically recharges when necessary, and units can be adapted with self-diagnostics system. Drawing from battery power, automatic fixture delivers 90 min to 8 hr of operation time when power is lost. Able to run 10 remote light heads, 6 and 12 V models accommodate up to 3 glare-free lamp heads.

Woodhead Industries Inc.    Deerfield, IL 60015
Dec 17, 2004 Ultra-Lock Connector System contains distribution boxes and cord sets based on push-lock principal. Users push down to connect, and pull up to disconnect. Equipped with IP68-rated radial seal and interlock design, system features identical contact configuration to M12 industry standard connectors. Once engaged, it provides fail-safe connectivity, even under stresses of cable flexing, mechanical shocks, or machine vibration.

Anderson Power Products    Sterling, MA 01564
Dec 17, 2004 Offered in 10 connector housing types, PowerMod® HP connector series features touch-safe female housings, integral positive latches, and cable strain relief. IP 20 rated products accommodate wire sizes from No. 6–2 AWG and metric wires from 16–35 mm. They use Sterling contact technology and are rated for circuit interruption. With electrical rating of 125 A at 30º C temperature rise, products may be used in applications to 175 A.

Advance Transformer Co.    Rosemont, IL 60018 5625
Dec 17, 2004 Designed to accommodate metal halide and high pressure sodium lamps, e-Vision® 70 W IMH-70-DLF/DBLS and 100 W IMH-100-DLF/DBLS70 employ electronic circuitry and provide automatic lamp power control and lamp monitoring. IntelliVolt® multiple-voltage technology enables ballasts to operate at input voltages from 120–277 V, 50/60 Hz, while lamp wattage regulation optimizes lamp color stability over life and reduces lamp-to-lamp color variations.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Dec 17, 2004 Engineered to withstand severe weather and service situations, Fire Power Systems provide safe, temporary electrical power to equipment such as lighting systems and exhaust ventilation fans used by firefighting and emergency rescue services. Crush-proof design is water-tight, even when submerged in up to 6 ft of water. Products are customizable for applications such as emergency power, temporary lighting, electrical machinery, and controls.

Hubbell Lighting Div.    Christiansburg, VA 24073
Dec 17, 2004 TurboBaffleâ„¢ compact fluorescent baffled luminaires feature radial louvers inside that reflect light, but minimize glare. Virtual Source® optical system provides 45° symmetrical cutoff in all lateral planes. TurboBaffle is available in 6 and 8 in. apertures, with fixture depths between 4–5 in. Light output emanates from 13 W twin tube, 18 or 26 W quad tube, or 26, 32, or 42 W triple tube CFLs. Magnetic or electronic ballasts provide instant-on and are accessible below ceiling.

Belden    Richmond, IN 47375
Dec 17, 2004 Safe-T-Line Circuit Integrity Cables feature flame-retardant, low smoke, and zero halogen materials, ensuring continued operation of emergency warning systems for at least 2 hours in event of fire. In building installations, cables connect Fire Command Center to various zones in building. Available in shielded and unshielded versions, series consists of 24 multi-conductor, riser-rated cables that are 300 V rated and NEC-designated as CI cables.

Alkco Mfg. Co.    Franklin Park, IL 60131 8389
Dec 17, 2004 SoftGlo wall-recessed night-lights provide soft functional illumination at floor level, while presenting unobtrusive design that melds with architectural interiors. Choice of louvered or subtly regressed shields distribute light in no-glare direct/indirect pattern. Units feature 20-gauge galvanized steel housing. Frame and faceplate are stamped or die-cast aluminum or steel. Standard finishes include white, stainless steel, or painted matte aluminum.

d’ac Lighting    Mamaroneck, NY 10543
Dec 17, 2004 Available in suspended pendant and ceiling mount models, Dome Fixture is characterized by 11¾ in. high, dome-shaped, prismatic acrylic globe with polished trim ring along bottom circumference and narrow ringed top cap that serves as ballast compartment. Contemporary, light industrial aesthetic is suited for range of commercial interior applications. Fixture uses incandescent, halogen, triple or quad tube compact fluorescent, or metal halide lamps.

LAM Lighting Systems, Inc.    Santa Ana, CA 92704 6598
Dec 17, 2004 Imperial Collection includes pendant lights, ceiling lights, and ADA-compliant wall sconces. Pendant lights are characterized by broad domed shapes with bold aperture and pendant-rod trims. Wall sconces feature same design, but are turned on side in semi-spherical shape. All are constructed from aluminum and steel components. Illumination is provided by choice of compact linear fluorescent, compact fluorescent, incandescent, or HID sources.

ALLSCAPE    Santa Ana, CA 92704
Dec 17, 2004 Dual-lens Model SL-43-HPBB recesses into ground, leaving only heavy-duty, die-cast lens frame and external lens visible at ground level. Internal reflector adjusts through 25° of tilt and 360° rotation, allowing light to be aimed directly onto walls, columns, or signage. Illumination is provided by metal halide, fluorescent, incandescent, or high-pressure sodium sources. Compression-molded Rhinoliteâ„¢ housing offers resistance to UV rays and corrosive elements.

Quail Electronics    Livermore, CA 94550
Dec 17, 2004 Power strips, offered as part numbers 0310.PS6-6 and 0310.PS6-15, compliment green dot hospital grade power cords and are supplied with power cord lengths of 6 and 15 ft., respectively. Each features one NEMA 5-15P plug and 6 NEMA 5-15R receptacles, all rated 15A, 125 V. Products are designed to meet UL and CSA requirements for use in hospitals and medical offices.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Dec 16, 2004 XPression name badges use red LEDs for readability and contain micro magnet for attachment to shirt pocket. Up to 120 characters can be programmed for display via Windows-compatible PC software, and area is provided for displaying custom logo or web address. Xpression SC serial cable-programming model comes with badge, serial cable, cell battery, and XPression software CD. XPression IR model also adds IR transmitter.

STMicroelectronics    Lexington, MA 02421
Dec 16, 2004 Supplied in screw-mounted ISOTOP package, 4-terminal STE50DE100 hybrid emitter-switched bipolar transistor sustains collector-source voltage of 1,000 V and collector currents up to 50 A. Power dissipation is 160 W at 25˚C and max operating junction temperature is 150˚C. Due to cascode configuration and dedicated bipolar technology, device offers square reverse bias safe operating area, enabling it to work in hard switching topologies.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 16, 2004 CorrTran Transmitters satisfy Class I, Division 2 hazardous location applications. They allow users to monitor effectiveness of corrosion inhibitors online, and detect and correct corrosion issues through upkeep and preventive maintenance. Units feature 2-wire, loop-powered 4-20 mA signal with HART protocol. Through these signals, general corrosion or pitting of pipe or vessels can be detected. Various probe styles and materials are available.

Honeywell Power Supplies    Northford, CT 06472
Dec 16, 2004 Models HPF602ULADA and HPF902ULADA connect to virtually any fire alarm control panel to provide additional power needed for Notification Appliance circuit expansion. Units offer 6.0 or 9.0 A of notification power, with direct AC power connections, on-board battery charging circuit, and backup battery space. Each contains ground fault detection indicators and built-in ANSI cadence patterns, which can upgrade older control panels that lack cadence capability.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Dec 16, 2004 Designed for use in water systems, Model E-9020 Corrater® Digital Transmitter operates on multi-drop 4-wire power and communication bus on cable lengths up to 4,000 ft. Explosion-proof, UL/CSA/ATEX certified unit features solution resistance compensation and is suited for electrically hazardous area field locations. Other operating modes include galvanic measurements, dissolved gas monitor, potential monitoring, and potential and current noise measurements.

EAO Switch Corp.    Milford, CT 06460
Dec 15, 2004 Rated at 250 Vac and compliant with EN 60947-5-5 and EN418 directives, Series 61 is 27 mm in diameter and mounts in 16 mm diameter hole. IP65-rated units include colored status indication ring and offer twist or security-oriented key release action. Nine different switching elements are available with silver or gold contacts, and both solder/plug-in or screw terminals. Switches are suited for machinery, process control, and access control equipment.

FCI/Burndy Products    Manchester, NH 03108
Dec 15, 2004 Suited for terminating copper conductors in various electrical connections, HYLUGâ„¢ uninsulated terminals are manufactured from seamless electrolytic copper tubing with heavy-duty wall thickness. With proprietary brite finish, terminals feature internally beveled barrel end and electro-tin plated terminals for corrosion resistance. Products are UL listed and CSA certified to 600 V and may be used on applications to 35 kV.