Tripp Lite    Chicago, IL 60609
Jun 17, 2011 Providing EMI/RFI noise filtering, ECO-Surge Suppressor Models TLP74TG and TLP78TUSBG feature 2 separate outlet banks with 20 timer options, enabling users to set exact time at which devices are turned on and off, based on time of day and day of week. Timer-controlled outlets minimize phantom loads by cutting AC power to unused peripherals. Model TLP78TUSBG additionally features two 2.0 A USB charging ports for USB tablets, MP3 players, and smartphones.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Jun 16, 2011 Designed to act autonomously as well as in concert with OspreyFMS energy management dashboard, BACnet Communicating Controls include HVAC control for multi-stage conventional and heat-pump mechanical units, and 6 schedule lighting time-clock control with photocell inputs and internal astronomical calendar. Each device is equipped with LCD screen for programming, internal schedules, and inputs/outputs for monitoring appropriate mechanical points.

Power Sources Unlimited, Inc.    Wrentham, MA 02093-2210
Jun 15, 2011 Housed in 3.3 x 5 x 1.50 in. package, N2 Power XL375 Series delivers 375 W of continuous power with 93% efficiency and 10 cfm of forced air cooling or 200 W convection. Single-output units are constructed on printed circuit board with U-Bracket for mechanical support and heat sinking. Power supplies feature remote on/off, 5 V standby output, 12 V auxiliary output, active PFC from 90-265 Vac, EMC Class B filtering, and active current sharing for N+1.

Acuity Brands Lighting    Conyers, GA 30012
Jun 15, 2011 Available in 2 x 2 ft and 2 x 4 ft configurations, Lithonia Lighting® VTLED volumetric luminaries embed nLight(TM) intelligent controls and deliver ambient white light for general illumination applications. Designed to minimize maintenance and building's environmental footprint, lighting solutions deliver plug-n-play functionality as well as smooth, continuous dimming functions. Areas of use include office, retail, education and healthcare environments.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jun 15, 2011 Active sensing face of 5-Way Adjustable Limit Switch Style Sensors can be adjusted for front, top, bottom, left, or right facing targets and include 4-corner LEDs that guarantee 360° visibility. Designed for 10-30 Vdc operation and featuring category IP68/69K protection, they are weather resistant, waterproof, and heat resistant as well as resistant to UV light. Sensors operate in temperatures from -25 to +85°C and are available in 15, 20, 30, and 40 mm sensing ranges.

FEI Company    Hillsboro, OR 97124
Jun 15, 2011 Vion(TM) plasma focused ion beam system is used in advanced integrated circuit (IC) packaging applications that use larger scale structures to connect multiple chips in tightly integrated packages. System quickly delivers site-specific cross-sectional analysis to accelerate failure analysis of bumps, wire bonds, through silicon vias (TSVs), and stacked die; as well as site specific removal of package and other materials to enable failure analysis and fault isolation on buried die.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jun 14, 2011 Able to conduct high level of Vehicle Dynamic Control, APD 4-way High Voltage Series connector handles operating voltages of up to 500 Vdc and operating current of up to 34 A for 4.0 mm² wires. Impulse voltage is rated at 3.5 kV and unit has rating of IP67 that increases to IP69k when used with individual wire sealing. Bayonet-mated and VDE-certified, product is also suited for use with electric vehicles, agricultural machinery, industrial automation, and robotics.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jun 14, 2011 Accepting 2.7-5.5 V input voltage, 2 A Model LM3435 drives 3 common anode RGB high-brightness LEDs sequentially with single inductor, powering one after another at 60 Hz and above to match LCoS or DLP devices. Switching-mode, constant current regulator integrates all active components, including N-Channel main MOSFET, P-Channel synchronous MOSFET, and 3 N-channel pass switches. Level of current pulses is individually programmed linearly for 1,023 steps through I2C interface.

GOEPEL electronics LLC    Austin, TX 78759
Jun 14, 2011 Model BAC9305-LAN1G Bus Access Cable enables real-time test of Gigabit LAN interfaces in combination with extended JTAG/Boundary Scan operations. Unit connects to multi-port I/O module SFX9305, providing triple speed 10/100/1000 megabit Ethernet interface. Supported protocols include ARP, TCP/IP, and DHCP. Product can also be combined with all SCANFLEX® controllers on PCI, PCI Express, Cabled PCI Express, PXI, PXI Express, FireWire, USB, or LAN basis.

Imtra Corp.    New Bedford, MA 02745
Jun 14, 2011 Designed to illuminate walkways and steps on large vessels and megayachts, Valencia and Majorca LED Lights feature straight and curved lenses, respectively, and indirect LED light source that eliminates hot spots and glare. Surface-mounted units have smooth, low-profile design measuring 3.14 in. diameter x 0.67 in. and consume just 1.0 W of power. Crafted of certified AISI 316 marine grade stainless steel, lights feature watertight O-ring seal to keep internal electronics protected and dry.

Phoenix Contact    Harrisburg, PA 17111 0100
Jun 14, 2011 Available for use in 12-24 Vdc and 48 Vdc operations, Quint Diode power supplies are designed for redundant applications that require isolation and N+1 redundancy. Housings made of extruded aluminum promote cooling as well as service life for product itself while also decreasing cabinet heat load. Use of MOSFETs rather than Schottky or silicon diodes limits effect of diode module on load of power supplies. Products carry UL 508 Listing as well as Class I, Division 2 Listing.

Calex Mfg. Co., Inc.    Concord, CA 94520
Jun 13, 2011 Available in 12, 15, 24, 28, and 48 Vdc output models, 240 W LP Series DC/DC converters have 4:1 input range, switching frequency of 210 kHz, and idle current of 40 mA. Units operate over -40 to +100°C temperature range and have efficiency of up to 90%. Over-temperature shutdown, current limiting, input reverse polarity protection, and overvoltage protection are included. Measuring 2.3 x 2.4 x 0.55 in., devices have case with threaded inserts for heatsink or backplane mounting.

J-Works, Inc.    Sylmar, CA 91342
Jun 13, 2011 Rated 10 A at 277 Vac/28 Vdc with contact resistance of 250 mW, JSB2851 Series features SPDT relay outputs that provide host control between common line and normally open and closed connection points. Wire connection to relays is made via on-board screw type terminals. User can communicate with modules from any programming or test language that supports USB communications. Modules replace internal PC-based plug-in cards in test, control, monitor, and measurement applications.

VPT, Inc.    Blacksburg, VA 24063
Jun 13, 2011 Designed for use in military and avionics power systems, DVPL0520S non-isolated, synchronous, regulated buck converter steps down power at point of use with up to 90% efficiency. Hermetic package measures 1.075 x 1.075 x 0.270 in. and weighs 16 g max. Offering user-adjustable output voltage from 0.8-3.4 V and output inhibit control, product operates from 5 V nominal input and has fault tolerant design with magnetic feedback. It can be used alone or with multiple POL DC-DC converters.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jun 13, 2011 Supporting 40, 50, and 67 GHz frequencies, N1810TL/UL terminated/unterminated SPDT latching coaxial switches and N1811TL/12UL 4-port and 5-port bypass switches are suited for customers testing radar, satellite, wireless HDMI, and microwave backhaul radios. Electromechanical units feature 0.05 dB insertion loss repeatability, greater than 70 dB isolation at 67 GHz, and operating life of 5 million cycles guaranteed and 10 million cycles typical.

Alltec Corporation    Canton, NC 28716
Jun 13, 2011 PowerTrip® Surge Protective Devices include PT-PM and PT-PB series units with Voltage Responsive Circuitry(TM) that provides protection at high surge current capacities. Designed for main and sub distribution panels, they have front panels with LEDs that show green for proper operation, show red to indicate circuitry problem, and show yellow to alert of neutral to ground problem. Audible alarm sounds when protection is lost, and counter shows number of transient events encountered.

Electro-Mech Components, Inc.    South El Monte, CA 91733 3689
Jun 10, 2011 Incorporating NVG Green-B light filters into Series 600 Quad Lamp/LED pushbutton switch series, Model SW44752 offers Night Vision Imaging System compatibility. Series 600 has ratings of 2.0 A resistive and 0.5 A inductive at 30 Vdc or 115 Vac. Requiring 2 lb of operating pressure, switches have minimum rated life of 100,000 actuations. Units are available with various lens cap, lens base, and lens filter materials, as well as multiple sockets that allow four T-1-¾ MFB based Green LEDs at 28 Vdc.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jun 10, 2011 Supplied in 40-pin thermally enhanced LLP, LM3435 drives 3 common anode RGB high-brightness LEDs sequentially with one inductor. LEDs are powered one after another at 60 Hz and above to match operation requirements of liquid crystal on silicone (LCoS) or digital light processing (DLP) image devices. Along with I²C control interface, this switching-mode constant current regulator integrates all active components and accepts 2.7-5.5 V input.

Thomas & Betts Corp.    Memphis, TN 38125
Jun 10, 2011 With Catamount® Twist Tail® Cable Tie, users can bend and twist off tail after installation, leaving no sharp edges to scratch cables or hands. Available in white or UV-resistant black 6.6 nylon, cable tie provides 30 lb of minimum loop tensile strength, which is suitable for light-duty applications.

Magna-Power Electronics    Flemington, NJ 08822
Jun 10, 2011 Offering front panel control, metering, and calibration, 250 kW MT Series V Power Supply integrates harmonic neutralizer, which creates 12-pulse AC waveform, minimizing harmonic distortion. Neutralizer suppresses AC harmonics by multiplying number of input phases with autotransformers. In addition to RS-232 interface and programmable SCPI command set, power supply features current-fed power processing, which delivers additional power processing stages for protection under abusive loads.