Acuity Brands Lighting    Conyers, GA 30012
Jul 01, 2011 Suited for parking lots and walkways, Tersen Ratio 1.5 supports 48 LEDs that produce illumination equivalent to 175 W metal halide lamp. Unit has finned shape that serves as both heat sink and architectural statement, and luminaire achieves 50,000-hr life at 1,000 MA with 70% lumen maintenance. American Electric Lighting® AVPL(TM), featuring die-cast aluminum construction and Valiant Colonial-style dayform, offers LED post top lighting for local roads, commercial streetscapes, campuses, and green spaces.

DesignLED    Shenzhen   China
Jun 30, 2011 Suited for rental and fixed installations, rubber-based Flexible LED Video Screen utilizes 320 x 160 x 12 mm tiles, each weighing 0.5 kg. Unit features 7.62 and 10 mm pixel pitch with brightness levels of more than 1,500 nits and 1,200-4,800 Hz refresh rate. Since tiles are flexible and bendable, users can create LED displays in curve, wave, arch, round, and right angle configurations. Full magnetic system on each tile enables unit to be attached to any metal surface.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jun 30, 2011 Featuring on-chip PMBus support, Models LM5066 and LM5064 operate over input voltage ranges of 10-80 V and -9 to -80 V, respectively. Integrated system protection and management blocks precisely measure, control, and manage electrical operating conditions in systems such as routers, switches, and base stations. Both models have selectable 25 mV/50 mV current limit thresholds for addressing wide range of intermediate bus voltages and load currents.

Basler Electric Co.    Highland, IL 62249
Jun 30, 2011 Designed to replace GE-type Models 269, 369, and 469 with no panel changes required, Model BE1-11m provides motor protection, control, and monitoring needed for large and medium motors and critical motor processes. Unit mounts in existing S1 cutouts or other common cutouts with available adapter plates. Featuring ring lug terminals for all relay connections, Model BE1-11m is UL recognized per Standard 508, File E97033; CSA certified per Standard CAN/CSA-C22-2; and CE qualified.

Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Jun 29, 2011 By creating multi-way fluidic connections, Multiflux(TM) connectors and interfaces let users integrate microfluidic devices into new and existing systems. Product range includes Linear and Circular connectors that provide several fluid input and output ports, enabling reliable and leak-free connections to be made in seconds between microfluidic chips and tubing as well as 2 bundles of tubing without disruptions to fluid flow. All components operate over -15 to +150°C range and up to 30 bar.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Jun 29, 2011 Available with multiple illumination options and various cap sizes and colors, TL1265 Series offers life expectancy of 500,000 cycles, contact rating of 50 mA at 12 Vdc, and initial max contact resistance of 100 mW. Dielectric strength is 500 Vdc for 1 minute and operating temperature is -20 to +70°C. Supporting SPST, Off-(On), and Momentary functions, switch is suited for A/V applications, computer peripherals, consumer electronics, and instrumentation markets.

PVRacking LLC    Churchville, PA 18966-1117
Jun 29, 2011 Constructed using aluminum, galvanized steel, and stainless steel hardware, PV Racking System allows solar modules to slide in place, making solar installation virtually clamp-free for both ground and roof systems. Modules are secured by continuous edge with capping that creates clean and finished look.

Ametek Programmable Power, Inc.    San Diego, CA 92121
Jun 29, 2011 California Instruments SmartWave(TM) (CSW) Series has direct-coupled, transformerless design that allows output of AC and DC on up to 3 separate phases or same phase. Built around DSP-based digital controller, products offer waveform generation capabilities and can also provide detailed harmonic information on acquired waveforms. Single unit provides up to 5,550 kVA output, and up to 6 units may be connected in parallel for 33,300 kVA output.

Server Technology, Inc.    Reno, NV 89511
Jun 29, 2011 Providing secure always-on outlet status, Smart POPS CDUs combine power distribution with local and remote power and environmental monitoring. Built-in network interface lets user view power, temperature, and humidity levels via Web browser, or receive SNMP-based alarms when conditions exceed defined thresholds. Power information per outlet includes Current load, Voltage, Power, Apparent power, Crest factor, and Power factor. Expansion CDU can be added to master unit via single IP address.

FZLED    New Taipei City   Taiwan
Jun 29, 2011 Compatible with electronic transformers that don't have LED drivers, MR16-03 series can fit GU5.3, GU10, E11, E14, E17, E26, E27, and B22 sockets and takes AC input voltages of 100-240 V; GU5.3 version also accepts 12 V AC/DC power source. Spotlights use 3 W of power and emit 120 or 160 lm. Depending on CCT of 3000K or 6000K, products have CRI higher than 80 or 75. Available beam angles include choice of 10°, 15°, 25°, 40°, or 60°, and lifetime ratings exceed 35,000 hr.

ILSCO    Cincinnati, OH 45227 1426
Jun 28, 2011 Featuring silicon bronze hardware, Type GPL3 series fits IPS pipe sizes from ½-12 in. and accepts ground conductor sizes from 4-4/0. UL-Listed and CSA-Certified products, resistant to corrosion, rotate 90° for installation flexibility. Suitable for direct bury in earth or concrete, series supports use within industrial construction, maintenance, power plants, sub-stations, and anywhere perimeter fencing is required to be grounded.

CUI, Inc.    Beaverton, OR 97005
Jun 28, 2011 Model EMSA050100-I38-SZ multi-blade wall mount power supply integrates USB connector directly into power supply base, creating compact solution that provide 5 Vout through industry standard connector. Designed for global use, it comes with user reconfigurable AC input blades for operation in the United States, Europe, the United Kingdom, and Australia. Units exceed U.S. EISA 2007 efficiency regulations for external power supplies.

Electro-Matic Products, Inc.    Farmington Hills, MI 48335
Jun 28, 2011 By bringing power and data out of control cabinets, EMRP6005 lets users safely access controllers without opening panel door. It has 120 Vac outlet protected by 3 A circuit breaker and RJ45 female to female feed through connector that allows communication/programming of devices inside control panel while keeping operator away from high voltage. Supplied in standard size 16 housing, product has screw terminal wiring for incoming power and IP67 rating when closed.

Knight Electronics    Dallas, TX 75243
Jun 27, 2011 Able to be installed in 19 in. rack, Smart Switched Rack PDU comes in horizontal and vertical models with 8 or 16 outlets that can be sequentially started, controlled, and monitored remotely. PDU monitors devices plugged into it, and user-defined alarm threshold for each outlet warns end-user via email, trap, or audible alarm in case of alert. All models, which are UL- and cUL-listed and have CE approval, feature 0.1 A resolution with range of 0-20 A and precision of ±2% ±0.1 A.

MCG Surge Protection Corporation    Deer Park, NY 11729
Jun 27, 2011 Housed in NEMA Type 1 powder-coated steel enclosure measuring 6.75 x 7.25 x 4.25 in., PT80 AC Power Line Protector includes set of relay contacts for remote monitoring, LED status indicators, and 3 ft 10 AWG cable. High peak current fuses and thermally protected varistors provide safe protection from transients up to 80 kA. Applications include local and branch service panels, generators, transfer switches, dedicated equipment, OEM equipment, and residential uses.

MCG Surge Protection Corporation    Deer Park, NY 11729
Jun 27, 2011 Rated to 120 Vac and 5-23 A, UL 1449 3rd Ed UR Recognized 400 Series provides heavy-duty surge suppression while featuring touch-safe terminal blocks that promote personnel protection. Combination of brute force surge protection and EMI/RFI filtering prevents damage or malfunction to sensitive equipment, and dimensions of 4.95 x 2.85 x 1.25 in. allow installation at or within equipment such as metering systems, PLCs, monitoring systems, and security controls.

Larson Electronics, LLC    Kemp, TX 75143
Jun 27, 2011 Measuring 2 ft long, EPL-FL1524-LED-100 Explosion Proof LED Aluminum Drop Light is approved for Class 1 and 2 Division 1 and 2 locations. It Incorporates 15 W LED tube lamp, which produces minimal heat, eliminates need for ballast, and is resistant to damage from dropping or impacts. Elements of construction include 100 ft of 16/3 AWG SOOW cord, housing and lamp guards formed of non-sparking aluminum, molded rubber bumpers, and annealed protective glass lens.

Infinite Power Solutions    Littleton, CO 80127
Jun 27, 2011 Designed for autonomous wireless sensors and other sub-100 mW applications, IPS-EVAL-EH-01 enables design engineers to develop and evaluate self-sustaining green power supply solutions. Kit features THINENERGY® MEC101 4 V/0.7 mAh solid state, rechargeable, micro-energy cell and MAX17710 PMIC from Maxim Integrated Products. Amorphous silicon photovoltaic solar array recharges MEC101 to 100% state of charge in 30 min in full sun and about 8 hr in typical office lighting.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 27, 2011 Supplied in anodized aluminum enclosure that provides EMI/RFI shielding, Model 9258 provides 6 channels that independently allow connection to any one of 2 devices from one COMMON device. Manual operation is accomplished via front-panel rotary switches, and all pins of DB25 interface are switched. Product also incorporates sealed switch with self-wiping, low-impedance contacts.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 27, 2011 Rated for 10/100/1000 Base-T networks, rackmount Model 9448 reroutes data between 2 networks via flip of one switch. It fits in standard 19 in. rack and supports all 8 pins of RJ45 Cat5e interface. Transparent to data format, unit does not require external power and incorporates sealed switch with self-wiping, precious metal contacts. All-aluminum enclosure resistant to EMI/RFI in noisy environments. Functionality eliminates need to plug/unplug cables, eliminating connector wear.