Applied Motion Products, Inc.
Watsonville, CA 95076
Oct 05, 2007 Providing 8 digital inputs, 4 digital outputs, and 2 analog inputs, Model ST5-Q is programmed with Q programming environment which delivers register manipulation, conditional processing, math functions, multi-tasking, and HMI compatibility. Self-Test and Auto Setup features measure/configure motor parameters automatically, while anti-resonance technology eliminates midrange instability. Demand Signal Smoothing reduces extraneous system resonances for smooth motor performance.

Schneider Electric
Palatine, IL 60067-7399
Oct 03, 2007 Available in 1-40 and 1-100 hp ranges, Square D® S-Flex(TM) facilitates start-up with preprogrammed parameters and installation with EZ-M mounting. Windows®-based PCSoft software lets users adjust parameters; store and transfer drive configuration files; monitor driver performance, including historical data; as well as configure, adjust, and control from remote location. Other features include harmonic reduction technology, energy economizing motor algorithm, and internal PID regulator.

ABB Drive, Inc.
New Berlin, WI 53151
Sep 28, 2007 Available in R1-R6 frame sizes, ACS550 drives can be configured via FlashDrop tool that facilitates parameter selection and setting. Included assistants further promote control panel and drive functionality by addressing PID, RTC, maintenance, diagnostics, start-up, serial communications, and parameter optimization. Rated from 0.75-100 hp @ 240 Vac, 1-550 hp @ 480 Vac; and 1.5-150 hp @ 600 Vac, drives feature swinging choke, frequency converter, and internal option slots.

Advanced Micro Controls, Inc.
Terryville, CT 06786
Sep 28, 2007 Rated at 6.3 A (120 Vac), SD17060B features enclosure that offers panel or side mounting options and LED diagnostics to simplify set-up and troubleshooting. AMCI safeguards include interlock connection, which prevents injury if motor connector is removed while driver is powered. For additional safety, short circuit protection - phase to phase and phase to ground - and over temperature circuitry are also included.

Copley Controls Corp.
Canton, MA 02021
Sep 27, 2007 Designed to meet military COTS requirements, XENUS R10 hardened servo drives support stand alone and networked modes and respond to variety of input formats, including step-and-direction commands. Units operate on single-phase or 3-phase 85-264 V supplies and deliver up to 3 kW drive power with peak current from 18-40 A. Housed in shielded enclosure measuring 2.55 x 5.4 x 7.55 in., drives are protected against over-current, over-temperature, and incorrect operating voltages.

Oriental Motor U.S.A. Corp.
Torrance, CA 90505
Sep 25, 2007 Featuring 100-230 Vac voltage range, model SB50W provides instantaneous stop, forward/reverse operation, electromagnetic brake control, and thermal protector open detection functions integrated into single unit. It is able to sense when thermal protector is opened and conforms to RoHS directive. Device offers support for induction motors, except for 2-pole type; reversible motors; and electromagnetic brake motors.

Sevcon, Inc.
Burlington, MA 01803
Sep 18, 2007 Combining fly-by-wire electronic controller, brushless DC motor, and 2-stage planetary gearbox, Integrated Motor Control covers operating voltages from 24-48 Vdc, provides 35-235 Nm peak torque, and uses CANopen communications protocol. Gearbox uses straight and helical gears and is fully greased for quiet operation. Measuring 7.3 x 3.2 x 5.4 in., control can open and close hoppers, valves, and other equipment; steer AGVs, fork trucks, and powerboats; and raise and lower antennas.

Control Technology Corp.
Hopkinton, MA 01748
Sep 13, 2007 Measuring 0.75 x 4 in., single-slot M3-40A Dual Axis Servo Control Module features RISC processor as well as Motion Accelerator Chip, enabling unit to run 64-bit floating point motion loops and handle local high-speed I/O events. Each axis has 16-bit analog output that can command torque and velocity mode drives. Equipped with 5 user-assignable inputs and 5 user-assignable outputs, control is suited for gearing, camming, and changing trajectories on-the-fly.

Mitsubishi Electric Automation, Div.
Vernon Hills, IL 60061
Sep 12, 2007 With Model E700, 200% motor torque is possible at 0.5 Hz, giving open loop speed range of 120:1. Dedicated USB port allows direct set-up and diagnostics via PC, while 100 kA fault-withstand rating facilitates panel construction. Analog and pulse train inputs/outputs provide pinpoint master/slave control. Featuring built-in operating keypad and display, self-contained, RoHS compliant unit still supports standard panel mounting keypads, and can be bookshelf or DIN rail mounted.

Insight Automation, Inc.
Erlanger, KY 41018
Sep 11, 2007 Compatible with Interroll EC100 and EC400 motor drive rollers, ConveyTrax® CRSC controls all devices typically associated with motorized roller conveyor application. It is configurable to control any brand of standard, high-torque, or brake motor and provides modular networked control over products for 24 V zoned accumulation conveyor. From one point, operators can control motor speed, acceleration, and deceleration as well as monitor current draw, actual speed, and performance.

ICM Controls
Cicero, NY 13039
Sep 07, 2007 Universal Motor Starting Relays (UMSRs) act as wire-for-wire replacements for potential relays that operate single-phase motor with voltage range of 110-502 Vac. Eliminating user adjustments at set-up, differential voltage sensing technology ensures exact starting voltage for each motor. Standard models UMSR30 and UMSR50 respectively feature 30 and 50 A switching capabilities, while enhanced models UMSRe-30 and UMSRe-50 intelligently discharge stray dc voltage from starting capacitor.

Industrial Indexing Systems, Inc.
Victor, NY 14564-9795
Sep 07, 2007 Performing at ambient operating temperatures up to 55°C, Model ESD-50/CEP delivers 50 A continuous with dc bus voltage of 620 V and maximum output of 100 A, while Model ESD-25/CEP delivers 25 A continuous and 50 A output. They can be used as standalone indexing or positioning controllers in master/slave motion applications, or as part of multi-axis system on SERCOS network. Up to 16 servomotors and I/O can be synchronized using IIS Emerald Series SERCOS master controller.

New Scale Technologies
Victor, NY 14564
Aug 31, 2007 Generating ultrasonic-frequency electronic signals to drive SQUIGGLE motors, MC-3000 and MC-1000HR can integrate into OEM instruments, serve as ASIC-ready reference designs, or perform motor evaluation. Miniature cards accept position feedback from commercially available analog or digital position sensors, allowing complete closed-loop control. While each MC-3000 drives 2 SQL-1.5 SQUIGGLE motors, each MC-1000HR runs one SQL-3.4 or SQ-100 Series linear SQUIGGLE motor.

Nippon Pulse America, Inc.
Radford, VA 24141
Aug 31, 2007 Incorporating 2 models, PRO Series combines NEMA 17 integrated 42 mm hybrid stepper motor with attached microstepping drive electronics in compact, RoHS-compliant package. Precision designed for medical technologies and semiconductor manufacturing applications, hybrid stepper motors are available in case lengths of 40, 48, and 60 mm. Depending on case length, PRO Series Size 17 motor can produce maximum holding torques (bipolar) ranging from 300-440 mNm.

Quicksilver Controls
San Dimas, CA 91773
Aug 28, 2007 Suited for driving large flywheel loads without additional gearing, Model QCI-A23K-3 NEMA 23 frame motor generates 145 oz-in. continuous torque, 165 oz-in. peak torque, and 58 W peak mechanical power. It comes standard with 8,000 count/rev encoder and is available in both IP50 and IP65 (wash down) packages. When combined with servo controller/drivers, motor creates high torque servo control system for speeds up to 2,000 rpm. Unit requires single cable for encoder and motor signals.

Lin Engineering
Santa Clara, CA 95054
Aug 17, 2007 Operating from 24-80 Vdc, bipolar Models R701 and R710 supply phase currents ranging from 1-7 A. They feature 10x microstepping, selectable current reduction of 33%, step frequency of 200 kHz, and optically isolated step, direction, and disable/enable inputs. For users needing minimized vibration and smooth performance, units include onboard trimpots that can be adjusted to alter current waveform coming out of motor and going into step motor coils.

Techno-Isel
New Hyde Park, NY 11042
Aug 03, 2007 Supplied fully assembled with I/O capability and USB ports, Phoenix I combines servo controller, drive, power supply, enclosure, wiring, cabling, and software. System controls single belt slide, ball screw slide, or rotary table with servomotor. Jog buttons on front allow for manual positioning without PC being connected. Equipped with 2-line LCD display, controller features 6 A of continuous torque and 12 A peak on 48 V drive.

Elmo Motion Control Inc.
Windsor, MA 06095
Aug 02, 2007 Integrating FASST (Fast And Soft Switching Technology) power management with thermal management technology, Whistle servo drives exhibit power density of 35 W/cm³ and achieve more than 99% efficiency. Available models include WHI-15/60 (15 A, 60 Vdc), WHI-10/100 (10 A, 100 V), and WHI-15/100 (15 A, 100 V). Each model integrates SimplIQ digital core, which offers functionality for motion control, programming, communication protocol support, and power capabilities.

Rockwell Automation
Milwaukee, WI 53204
Aug 02, 2007 Offering PowerBrick power circuit technology, 15 kV Allen-Bradley Bulletin 1503E medium voltage SMC Flex OEM component kits suit OEMs and power intergrators using motors from 10-14.4 kV at 200 and 400 A ratings. Fiber optic multiplexer board accommodates gate drive signals for up to 36 silicone controlled rectifiers and kits also include voltage feedback system. They limit starting torque and minimize mechanical damage to belts, gears, and other machinery.

ABB Control Inc.
Wichita Falls, TX 76302
Aug 01, 2007 Incorporating FieldBusPlug communication system, PSR Series Softstarters are available in 3 sizes with widths from 1.77-2.13 in., covering rated currents from 3-45 A, up to 600 Vac, and with control voltages of 24 Vdc or 100-240 Vac. Devices include integrated by-pass, marked front panel with knob adjustments for 3 operational settings, and marked connection terminals. Cooling fan can be attached to increase starts from 10/hr to 20 starts/hr.