Addonics Technologies, Inc.
San Jose, CA 95131
Apr 22, 2005 Able to connect up to 4 external SATA hard drives, hot-swappable ADSA3GX4R-E is powered by SATA II ASIC, which provides embedded support for first-party DMA commands for Native Command Queuing and on-chip hardware RAID. Controller supports PCI-X and PCI Bus systems, providing 3 Gbps throughput rate per port for RAID or non-RAID external disk arrays storage applications. Attatched drives can be configured as RAID 1/0/1+0/1+S or as 4 individual drives.

Siemens AG
Munich D-80333  Germany
Apr 07, 2005 With 40 mm format of Simatic-S7-300 module, Teleservice Adapter II mounts on DIN rail or S7 channel and incorporates analog or ISDN modem. It lets users perform diagnostics, set values, and transfer programs and data over telephone lines from anywhere in world. Linked to Simatic programmable controller over MPI, PPI, or Profibus-DP interface, product is assigned parameters and programmed over USB interface.

Siemens AG
Munich D-80333  Germany
Apr 05, 2005 Simatic ET 200pro features IP65/67 protection and safety-relevant Industrial Ethernet communication using Profisafe profile. Actuators and sensors are connected via fail-safe I/O modules. With interface module, standard and fail-safe modules can be optionally integrated in Profibus or Profinet networks, where standard and fail-safe communication is carried out in parallel on one cable. ET 200pro solves automation tasks with safety requirements up to SIL 3 or Category 4.

Men Micro Inc.
Lago Vista, TX 78645-4160
Mar 25, 2005 Embedded System Module, Model EM01 is equipped with 384 MHz MPC5200 PowerPC featuring compute bandwidth of 760 MIPS, and Altera Cyclone® FPGA, which allows OEMs to implement application-specific functionality. Module includes 256 Mb SDRAM, 1 Gb NAND flash, 2 Mb non-volatile static memory, and 16 Mb graphics memory. Interfaces are provided for 2 Fast Ethernet ports, serial channel, and USB. Module operates over industrial temperature range of -40 to +85°C.

Curtiss-Wright Controls Embedded Computing
Leesburg, VA 20175
Mar 21, 2005 Avionics communication controller, Model P429A combines 2 ARINC 429 controllers, each with dual ARINC 429 transceivers, and 4 serial channels on single card. It includes 64 KB Dual Port RAM and 8 MB Flash Memory. Custom FPGA provides PCI interface bus to ARINC, serial channels, DMA controller, command and status registers, interrupt controller, PCI target controller, and Dual Port RAM and Flash memory. Conduction-cooled card is rated for -40 to +75°C environments.

Escort Memory Systems, Inc.
Scotts Valley, CA 95066
Mar 08, 2005 Featuring integrated antenna, Model HF-0405 reads HMS and LRP Series tags with read range up to 100 mm. Eight LEDs indicate communication status and address on network. Controller's M12 style connector provides connectivity for power and data communications, while IP67 NEMA rating makes unit suited for food processing, automotive, pharmaceutical, and electronic industries. Mounting bracket allows installation in tight corners or alongside conveyers.

Fieldbus Foundation
Austin, TX 78731
Feb 10, 2005 High-Speed Ethernet (HSE) Interoperability Test Kit v1.0 includes all hardware and software required to ensure complete HSE device interoperability as specified by Fieldbus Foundation's official registration testing procedure. HSE ITK consists of test engine that executes over 400 test cases to exercise device implementation, test function block, and device description (DD) viewer that allows examination and verification of device's DD.

SMA Regelsysteme GmbH
  Germany
Feb 01, 2005 Utilizing graphic system that supports dual-screen technology, CPU7.2 allows users to display different content simultaneously on 2 different screens. Screens can be connected via DVI-D combined interface with Y-cable or via rear I/O. Dual screen technology, suitable for industrial applications, enables one screen be used for operator entries, while other is used as display unit for process data.

GE Fanuc Embedded Systems
Huntsville, AL 35803
Jan 21, 2005 Model PMC721TX operating at up to 800 MHz and features up to 512 Mbytes DDR SDRAM, 8 MB on-board flash memory, and 133 MHz PCI-X bus interface. Processor PCI Mezzanine Card utilizes modular approach to add processing capabilities and can be run as system controller or dedicated I/O processor. Suited for communications and networking applications, product offers front panel support for two 10/100/1000BaseT Ethernet ports and one RS-232 serial port.

Parvus Corp.
Salt Lake City, UT 84115 2913
Jan 12, 2005 Fast1394â„¢ PC/104-Plus IEEE-1394b Controller is suited for data acquisition from audio, video, and storage peripherals in embedded computer systems. It integrates 3 plug-and-play bilingual cable ports, which are galvanically isolated between transceiver and link controller. Link layer and physical controllers integrate intelligent power management capabilities, deep transmit and receive FIFOs, support for digital video and MPEG data stream reception/transmission.

Siemens AG
Munich D-80333  Germany
Dec 09, 2004 Featuring IP65, 66, and 67 protection, Simatic ET 200pro is vibration-proof to 25 g shock load and is installed directly at machine outside control cabinet. Profibus communication and voltage supply can be connected directly using screw-type cable glands at up to 16 A electronic load, M12 or 7/8 in. standard connectors, or Ecofast with prepared cable for data and power. Interface module can be expanded using up to 16 modules.

Parvus Corp.
Salt Lake City, UT 84115 2913
Dec 08, 2004 With PC/104-Plus form factor of 3.550 x 3.775 in., USB104+ module provides 4 downstream ports: 2 supplying up to 500 mA drive, and 2 enhanced ports supporting up to 2 A drive, which can directly power attached devices. All downstream ports allow mixed, simultaneous connections of USB 2.0 and/or 1.1 devices at different speeds from 1.5–480 Mbps. Board supports hot insert and is compatible with real-time operating systems.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Nov 24, 2004 FieldConnexâ„¢ provides multiple power supplies for fieldbus devices via digital data lines. It consists of motherboard with single or redundant plug-on modules, including isolated power module with 30 V and 500 mA, isolated FNICO power module with 17 V and 500 mA, and non-isolated module with host spur protection. System is installed on DIN-rails and integrates fieldbus segment connections, appropriate terminators, as well as host-specific system plug connectors.

UTStarcom
Alameda, CA 94502
Nov 19, 2004 MovingMedia 2000 employs transparent next-generation network (NGN) voice and data over IP architecture that distributes all components of CDMA system throughout network. Allowing CDMA operators to transition to all-IP network, product lets carriers distribute network elements and functions across network as needed. Radio access, core voice network, and core data network products are offered in 450, 800, and 1,900 MHz frequencies.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Nov 15, 2004 Series PCIx515 consists of 4 pin-compatible units suited for connectivity of notebook and desktop PCs, consumer electronics, industrial control, and other PC-based applications. Units support single CardBus slot and include PC Card socket controller that provides bridging between PCI bus and PC Cards. For 1394 applications, PCIx515 family provides one 1394a 400 Mbps port. For security and e-commerce applications, units offer single slot Smart Card interface using GemCoreâ„¢ Technology.

Siemens AG
Munich D-80333  Germany
Nov 08, 2004 Simatic S7-300 controller features CPU 315-2 PN/DP with Profinet interface, which is used for Industrial Ethernet communication at cell level as well as connecting I/O devices and field devices. With Step 7 engineering tool, CPUs can be programmed over Ethernet from central programming device or PC. Also accessed from central point, Profinet field devices can be modified with Development Kit, which includes CD-ROM with relevant software and license.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Oct 18, 2004 Featuring 15 in. LCD monitor, flat-panel mount, and keyboard tray, 2U Flat-Panel Monitor Console Kit lets users set up and control rack-mounted IBM eServer xSeries servers. Select versions also include U.S. language travel keyboard with Ultra-Nav. Featuring plug and play installation, modular SDLT600 Drive is available with 4560SLX Tape Library sled drive option, providing 300 GB tape cartridge capacity with up to 36 MB/sec native transfer rate.

Advantech Automation Corp.
Cincinnati, OH 45240
Sep 30, 2004 Models PCI-1241/1242/1261 provide 4- and 6-axis of servo and stepper motor control. They support 2D and 3D interpolation for linear, circular, and arc motion, as well as T- and S-curve acceleration. All 3 cards provide precise position and rotation control, as each axis is equipped with 32-bit logical position counter that counts axis pulse output number; and 32-bit real position counter that records feedback pulse from outside encoder or linear scale.

Fadal Machining Centers
Chatsworth, CA 91311
Sep 28, 2004 Digital Model 104/D CNC, with 850 MHz Pentium III processor, uses menu system to capture part, tool, and position data. Existing part programs can be run without editing. Control offers integrated 10BaseT/100 Ethernet, 2 Gb data storage capacity, and 15 in. LCD display. GE Fanuc Series 18i MB5, with 5-axis capability, provides straightforward operator interface and interactive screens. Siemens Sinumerik 840D, suited for high-speed moldmaking, includes ShopMill for milling and drilling.

GE Fanuc
Charlottesville, VA 22911
Sep 24, 2004 Series 0i-Model C, for 4-axis machines, features conversational part programming with Manual Guide i, which provides step-by-step, fill-in-the-blank programming and allows for single-screen machine operation. Probing screens allow programming tool setting and spindle probes without knowledge of G-code and without special macros. Operators can insert PC memory and LAN cards into PCMCIA slot in front panel of LCD for additional functionality. Series 0i Mate-Model C controls up to 3 axes.