Data Entry & Collection Terminals

Computer Hardware & Peripherals, Machinery & Machining Tools

Cellular Automation Products offers multi-carrier capabilities.

July 23, 2015

Sixnet® series RAM® and IndustrialPro® cellular automation products have built-in 4G LTE multi-carrier cellular support for North American carriers. With multi-carrier capabilities, those using Red Lion RAM cellular RTUs and IndustrialPro routers can select and switch between wireless carriers to alleviate cellular coverage or bandwidth issues. Built-in event engine can trigger I/O or send SMS text messages based on real-time data to provide local control and real-time remote monitoring. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Pipe/Cable Locator leverages cloud, GPS, mobile technologies.

March 27, 2015

Delivering cloud-based mobile locating technologies, UTTO® connects locate device, field worker, and damage prevention process. Cloud-based platform, mobile tablet app, and networked locator device capture and store locate and position data without requiring changing of field technicians work practice or procedures. By locating target using GPS technology and cloud-connected satellite updates, solution maps underground assets to within 1 m and works with existing locate devices. Read More

Computer Hardware & Peripherals

Remote Terminal controls chilling and heating dry baths.

December 5, 2014

Without necessitating use of external computer, EchoTherm™ MIC20 may be used to remotely configure and monitor RHB20 (heat only) or RIC20 (chilling/heating) dry baths. Terminal lets users set and display temperature/timer, collect current set point/temperature, set/clear idle mode, or perform calibration using provided RS232 cable. Featuring backlit 2-line alphanumeric display and keypad, battery-operated (230 hr continuous) unit can be disconnected from one unit and used to set another. Read More

Computer Hardware & Peripherals

Industrial Cellular RTUs offer Wi-Fi and carrier options.

August 21, 2014

RAM® 9000 models are available with Wi-Fi for local wireless communication as well as carrier options for connecting to, monitoring, and controlling assets and processes regardless of location. RAM 9000 Wi-Fi provides IEEE 802.11b/g/n (2.4 GHz) access point functionality and delivers security via WEP, WPA, and WPA2 encryption. Built-in I/O and active GPS, combined with RS232 and RS485 serial and Ethernet ports, allow secure monitoring of remote devices via 3G/4G LTE cellular networks. Read More

Computer Hardware & Peripherals, Automatic ID

Mobile Handheld RFID Computer incorporates NFC technology.

May 6, 2014

Able to read and process information using Near Field Communications (NFC) technology, SoMo 655 operates as reader and writer. Reading capabilities cover NFC High Frequency 13.56 MHz contactless smart tags, including those compliant with ISO/IEC 14443A and B, ISO 15693, EPC GEN 2 HF, and ISO 18000-3 mode 3. RFID NFC reader plugs into SoMo 655 and enables single-handed operations; black and anti-microbial white versions are available.
Read More

Computer Hardware & Peripherals, Sensors, Monitors & Transducers

Cellular RTUs monitor remote assets in extreme conditions.

April 16, 2014

Combining built-in I/O and active GPS with serial and Ethernet ports, Sixnet Series RAM® 9000 securely monitors remote devices via 4G LTE cellular communications. On-board I/O includes 2 digital inputs, 2 digital outputs, 3 analog inputs, and 1 relay output. Routing capabilities provide secure communication, while separate RS-232 and RS-485 ports offer remote connectivity to serial devices. In addition, USB host port allows for connection of external peripherals such as I/O and Bluetooth. Read More

Computer Hardware & Peripherals, Controls & Controllers

Food Traceability System features touchscreen terminal.

January 23, 2014

Equipped with touchscreen interface, SIMBA Food and Product Traceability System tracks, labels, and ships unlimited number of products with specific species and characteristics. System automatically generates bills of lading and verifies shipments, eliminating charge-backs. SIMBA also interfaces directly to any scale that has digital output to serial or USB port. Weight of carton is automatically added to database within SIMBA and may be added to label on-the-fly. Read More

Computer Hardware & Peripherals

Gas Flow Computer offers anytime, anywhere user access.

December 13, 2013

Housed in rugged enclosure, TBox LT2 comprises remote terminal unit and TFlo™ gas measurement software with pre-configured PC menus and Web pages. RTU offers all-in-one SCADA system featuring integral Web server, 3G wireless communications, and cyber security application suite, all integrated with programmable automation, alarm notification, data logging, and Ethernet communications. Operating from -40 to +70°C, system is suitable for well sites or multiple-run metering and regulating stations. Read More

Computer Hardware & Peripherals

Secure RTU keeps utilities current with smart grid technology.

November 22, 2013

Intended for substation and feeder automation, NTX series remote terminal units (RTUs) aid utilities that rely on remote telemetry to provide critical system information to control center. Modularity enables adaptation to application/installation requirements, while multiple master and IED (Intelligent Electronic Devices) ports foster integration. Client/server architecture, using ARM9e 32-bit processors with DSP extensions, enables handling of large I/O point counts and IED data volumes. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Data Collection/Geolocation PDA suits mobile survey uses.

October 18, 2013

Integrating wireless technologies — WiFi, Bluetooth®, and Tri-Band GSM/GPRS/EDGE/HSPA cellular modem — on rugged Windows® Mobile platform for portable computing, GIS-1 can be used as data collection device with Altus APS-series GNSS survey instruments. It provides up to 8 hr of operation time in field between charges, and built-in L-1 GPS receiver and 3.2 MP camera can be used for navigation and GIS applications. Device delivers 2.5 m accuracy and may also be used as smartphone. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Sensors, Monitors & Transducers

Industrial Tablet Computer aids route based condition analysis.

September 30, 2013

Featuring IP65 and MIL-STD-810G certification, Metso Maintenance Pad route-based condition monitoring data collector and analyzer includes Metso Machine Analyzer software with route planning, route and off-route measurements, as well as tools for vibration analysis. Use of wireless sensors and measurement modules accelerates safe setup without cables and minimizes time spent close to measured machine. Sensors have built-in memory and can be left in field to log data for later download. Read More

Computer Hardware & Peripherals

Remote Terminal Unit helps utilities manage stressed grids.

July 3, 2013

By monitoring distribution assets to determine load constraints and overloading conditions in network, Multilin™ DGCM Field RTU helps utilities understand grid conditions to minimize outages and equipment damage. Unit can log equipment operating parameters to facilitate immediate and long-term planning decisions. It also helps to identify feeders that are exposed to electricity theft. Applicable to new and retrofit applications, RTU supports wired and wireless communication architectures. Read More

Computer Hardware & Peripherals

Wireless Terminal enables safe, efficient tank level measurement.

June 25, 2013

OneWireless™ Terminal Solution lets operators of oil and gas terminals increase productivity while complying with health, safety, and environment regulations. Included ISA100-compatible Honeywell Enraf SmartRadar FlexLine wireless radar gauge does not require external wireless module; integrated radio sends tank level measurements securely and wirelessly to central control room. Flexline can also collect data from local tank instruments and send data wirelessly through same ISA100 network. Read More

Computer Hardware & Peripherals, Software, Sensors, Monitors & Transducers

M2M System remotely monitors ATMs.

February 22, 2013

Developed for banking industry, ATM Site Manager remotely monitors passive infrastructure such as air conditioners, cameras, lighting systems, battery banks, and door lock systems across thousands of ATM sites, and generates actionable information in real-time. System consists of hardware unit, Remote Telemetry Unit that communicates to machines via sensors/relays, and Central Management software based on WebNMS Framework. RTU communicates to central management system via Ethernet/GRPS/SMS. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Communication Systems & Equipment

CDMA RTU offers remote monitoring where GSM is not available.

February 14, 2013

With ADU-500L CDMA Data Logger Telemetry System, several transmitters can send information simultaneously over single communication channel, letting several users share band of frequencies. Battery-powered unit incorporates 2 analog inputs measuring at 12-bit resolution, 3 digital inputs, and I2C interface supporting external digital sensors. SMS messages are used for wireless logged data transfer, event-driven alarm messages, and periodic status messages for verifying unit availability. Read More

Computer Hardware & Peripherals

Wall Mounted Terminal integrates barcode software.

December 12, 2012

Run on Windows® CE, Kiosk Wall Mount Terminal makes CheckMate Suite of barcode software applications available to production lines, shipping docks within facility, or warehouses. Software, which includes tracking of assets, inventory, documents, job costing, tools, and equipment, can be used anywhere within wireless range of server or via Ethernet connection. Terminal provides ability to scan at multiple locations as well as identify bottlenecks. Read More

Computer Hardware & Peripherals

Rugged Tablet aids decision making on construction sites.

November 16, 2012

Trimble® Site Tablet, supplied with Trimble SCS900 Site Controller Software, provides real-time data to construction professionals for visualizing cut/fill levels, calculating material volumes, and communicating work orders. Meeting MIL-STD-810G military standards for drops, vibration, and humidity, IP65-rated tablet integrates cellular modem and features sunlight-readable, color, 7 in., multi-touch capacitive screen that has scratch- and impact-resistant Gorilla® Glass. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Handheld GNSS Devices provide rugged field performance.

October 11, 2012

Optimized for GIS field workflows, Geo 5 provides essential GIS data collection functions for all day, submeter productivity, while Juno 5 offers rugged, ergonomic handheld for maintenance, inspection, and asset management applications. Complete with wireless communications options, integrated cameras, and sunlight-readable screens, both utilize TerraSync field software and are rugged enough to withstand shock, vibration, water, and dust. Read More

Vision Systems, Computer Hardware & Peripherals, Controls & Controllers, Automatic ID

Time and Attendance System integrates access control.

September 14, 2012

Designed for businesses with up to 500 employees, Time Key Data Capture Terminal supports PINS, Smart Cards, and biometric fingerprint credentials; along with HID iClass®, LEGIC, MIFARE™, and e-DATA biometric readers, or any combination. System captures and tracks all access control activity and cardholder information, including card number and scheduled access for each cardholder. It can be managed via web browser, facilitating reporting for payroll and access management. Read More

Computer Hardware & Peripherals, Controls & Controllers

Programmable RTU Controller features user-friendly SDK.

May 10, 2012

The ioPAC 8020-C is C/C++ programmable RTU controller featuring a Linux/GNU platform adapted to data acquisition and condition monitoring. It has 2 Ethernet switch ports that allow system integrators to build control networks with open Ethernet standards and daisy-chain connectivity. Designed for train-related applications, controller tolerates operating temperatures of -40 to +75°C, while M12 Ethernet connectors and spring-type terminal blocks withstand high vibration environments. Read More