Computer Interface Connectors

Electrical Equipment & Systems, Computer Hardware & Peripherals

USB Wall Plug Adapters meet Level VI standards.

August 13, 2015

Featuring 2.56 x 1.42 x 0.89 in. footprint, 5 Watt Models SWI5-5-N-I38 and SWI5-5-E-I38 deliver 5 Vdc single regulated outputs with universal input voltage from 90~264 Vac. Both feature no load power consumption of <0.075 W and provide over voltage, over current, and short circuit protections. SWI5-5-N-I38 has input blades for North American and Japanese applications, while SWI5-5-E-I38 has European input blades. Applications include media players, e-readers, GPS, and other mobile devices. Read More

Computer Hardware & Peripherals

USB Flash Module enables in-field panel upgrades without computer.

April 13, 2015

Used in field, Model 400 USB Flash Module lets installers update firmware for panels that would otherwise require computer and Model 399 Programming Harness. USB 2.0 connector is provided to plug USB flash drive into Model 400, and 4-pin header connects directly to panel. As new firmware is released from DMP, it can be downloaded and stored on USB flash drive and then connected to Model 400 to be used for panel firmware updates. LED on USB indicates successful programming. Read More

Computer Hardware & Peripherals

Ethernet and Converged Network Adapters support 10 GbE and OCP.

March 18, 2015

OneConnect® OCe14104 and OCm14000-OCP are 4-port 10GbE PCIe and dual-port 10GbE Open Compute Project (OCP) form factor Ethernet and Converged Network Adapters (CNAs). OCm14000-OCP adapters provide such capabilities as Network Virtualization and Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), Single-Root I/O Virtualization (SR-IOV), and protocol support for RDMA over Converged Ethernet (RoCE) or block storage on Emulex OneConnect CNAs. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Optics & Photonics, Computer Hardware & Peripherals

Feed-Through Connectors eliminate soldering.

March 6, 2015

Available in audio, data, and fiber versions, FT Digital XLR Feed-Through Connectors can be front or rear mounted into standard 24 mm XLR connector mounting hole. Options include both USB 2.0 and 3.0 LC and SC fiber, RJ45 in both Cat6 and Cat5e with and without shielding, and connector gender change. Offered with standard or countersunk mounting holes, connectors have high impact plastic shells. Bezels are available in 7 colors to identify function when fitted to control panel. Read More

Computer Hardware & Peripherals

Ethernet Network Adapters deliver enterprise-grade features.

March 4, 2015

Providing 2 ports of 10GBASE-T, OneConnect® OCe14102-NT adapters let end-users leverage existing copper infrastructure while gaining such enterprise-class features as overlay networking and high performance storage offloads as well as full support for PCIe 3.0. Intelligent offload capabilities can lower overall server power consumption by up to 50 W/server and increase server CPU availability by reducing server I/O workload. Areas of use include data center and cloud environments. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Pluggable Network Adapters support IEEE-802az standard.

February 13, 2015

Supporting fiber optic link distances up to 10.0 km per TIA 568 (9/125), Blackfin LC 1000Base-SX/LX to PCI-Express Network Adapters  integrate Intel I210 PCI-Express network controller plus optical transmitters and receivers into modular pluggable component with duplex LC interface. SMBus pass through enables IPMI/BMC configuration of controller interface. Operating from -40 to +85°C with 0.81 W active state power consumption, adapters have threaded PCB retention bosses for secure mounting. Read More

Computer Hardware & Peripherals

USB Type-C Port Controllers target top-tier PC makers.

February 13, 2015

Based on PSoC® 4 programmable system-on-chip architecture, CCG1 Type-C Port Controllers integrate voltage- and current-monitoring circuitry critical for power adapter applications. PSoC 4 architecture integrates ARM® Cortex™-M0 core with PSoC's programmable analog and digital peripherals. Type-C standard’s 2.4 mm high connector plug allows for transport of USB signals and PCIe or DisplayPort signals on same connector. Applications include USB cables, power adapters, notebooks, and monitors. Read More

Computer Hardware & Peripherals

Ethernet/IP Upgrade Devices support RIO Blue Hose cabling.

January 15, 2015

Operating at 24 Vdc nominal, BH4485 Ethernet/IP Devices upgrade and migrate Remote I/O Blue Hose® cabling into Industrial Internet network infrastructure. Units are 10/100 Base-T compliant, offer remote I/O baud rates of 57.6 and 115.2 K, and support data highway RIO specifications up to 10,000 ft. Unlike gateway and converter patchwork solutions, products provide full infrastructure transformation, enabling access to all IP-enabled features of new wired or wireless devices. Read More

Computer Hardware & Peripherals

Gigabit Starter Kits use HomePlug AV2 technology.

January 7, 2015

Utilizing HomePlug AV2 industry-standard technology, PowerLine AV2 2000 Gigabit Starter Kit (DHP-701AV) and PowerLine AV2 1000 Gigabit Starter Kit (DHP-601AV) turn virtually any home wall outlet into network connection with speeds up to 2,000 and 1,000 Mbps, respectively. Featuring 2 PowerLine AV2 2000 adapters, DHP-701AV leverages AV2 MIMO technology for expanded network coverage. Both plug-and-play systems utilize 128-bit AES Link Encryption with key management for secure communications. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices

RJ45 and USB Panel Mount Connectors are waterproof to 1 m.

December 18, 2014

Rated 1.5 A @ 125 V, ASICPICRJ45S shielded, panel mount RJ45 receptacle has gold-plated contacts and provides Ethernet connectivity for industrial environments. Panel mount USB receptacle, ASICPICUSB2.0AS, is rated at 1.5 A @ 30 V AC/DC, has gold-plated contacts on front and 4 solder connection pins and shield in back, and provides USB connectivity for data transmission in industrial environments. When covered by ASICPICPC protection cap, RJ45 and USB bulkhead connectors have IP67 rating. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

USB 3.0 Interface ICs come in low-pin count packages.

November 20, 2014

Respectively, FT600Q and FT601Q come in 56- and 76-pin QFN packages and feature 16- and 32-bit wide FIFO bus interface. Both chips, which function as SuperSpeed USB 3.0 to FIFO bridges, support up to 8 endpoints (other than management endpoints) linked to configurable buffers of 16 KB length for in and 16 KB for out. Providing data bursting rates up to 3.2 Gbps, USB 3.0 products support 2 interfacing modes: 245 FIFO mode and multi-channel FIFO mode. Read More

Computer Hardware & Peripherals, Controls & Controllers, Communication Systems & Equipment

CNCs support safety communication with PAC control systems.

November 18, 2014

Available for FANUC Series 3xi-B CNCs, EtherNet/IP Adapter Safety function enables safety communication with Logix PAC systems. Function communicates digital input/output signals across Ethernet to simplify hardware and connections needed. Using CIP Safety functionality of EtherNet/IP Adapter Safety function with dual check safety, sending side device cross-checks safety signals, adds inspection data, and then transmits both data sets to receiving side device. Read More

Computer Hardware & Peripherals

USB Adapter Kit extends wireless coverage.

October 31, 2014

Supplied in FCC/IC certified kit, 2.4 GHz 802.11b/g/n Model ARK-2404U-3 comprises WLAN-LCUSB2415 wireless USB Adapter and Hyperlink's 4 dBi omni-directional antenna. Adapter supports data rates of 150 Mbps and features IP67-rated waterproof enclosure for outdoor applications. Included 5 m cable is terminated with USB 2.0 plug for direct connection to desktop or notebook PC. Additional features include 100 mW to 1 W adjustable RF power, Windows OS drivers, and WPA/WPA2 data security. Read More

Computer Hardware & Peripherals

Video Adapters provide 4K HD video through USB 3.0 connection.

October 13, 2014

USB 3.0 to HDMI® (USB32HD4K) and USB 3.0 to DisplayPort® 1.2 (USB32DP4K) enable users to connect USB 3.0-equipped laptop or desktop PC to Ultra HD 4K television, display, or projector, even if computer does not natively support 4K video. Integrated chipset enables plug-and-play functionality, where drivers are automatically installed and updated, and USB-powered performance eliminates need for additional power supply. Areas of use include graphics-intensive applications. Read More

Computer Hardware & Peripherals

USB to Serial Bridges offer 12 Mbps USB data transfer rate.

September 29, 2014

Available with 1, 2, or 4 UART channels, XR21B142x Series provides way to interface with RS-232 or RS-485 serial networks through USB using minimal PCB space. Large 512 Byte transmit and receive FIFOs enable max data throughput of 9 Mbps across up to 4 UART channels. Offering ±15 kV ESD protection on USB pins, devices eliminate need for additional protection components, making them suitable for smart grid data collection, data aggregators/concentrators, and security/access control systems. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Mounting & Attaching Products

Shielded Connector can convey transmissions up to 5 Gbps/pair.

September 18, 2014

Supporting LVDS, USB3.0, and HDMI 1.4a Type E, GT32 Series employs pin-in-hole intrusive reflow method that promotes PCB retention force and enables one-time reflow process with other SMT components. Lock strength is 98 N, and operational range is -40 to +105°C. Featuring 1.5 mm pitch, shielded connector offers EMI shielding and low near-end crosstalk (NEXT). Respective transmission speeds for 4-, 10-, and 19-position models are up to 3, 5, and 2 Gbps/pair. Read More

Computer Hardware & Peripherals

USB over IP Extender connects Windows PCs to 4 USB devices.

July 8, 2014

By allowing remote connection of 4 USB peripheral devices over Ethernet, Model USB-IP-4LC eliminates need for locally attached host PCs. USB peripheral devices can be centrally managed and monitored from remote server or PC via web interface. Offering true plug-and-play functionality, extender transfers data over 1000Base-T Gigabit Network and supports variety of USB 1.0 and 2.0 devices such as USB hard drives, flash drives, card readers, webcams, scanners, and multi-function printers. Read More

Computer Hardware & Peripherals, Communication Systems & Equipment

USB Fieldbus Adapter extends connectivity to fieldbus networks.

July 1, 2014

USB Fieldbus Interface v3 facilitates in-field or instrument shop-based FOUNDATION fieldbus device configuration, monitoring, and troubleshooting. Multiple options are provided for commissioning and configuring FOUNDATION fieldbus devices. Functionality allows Fieldbus devices to be commissioned, decommissioned, and assigned device tags. Communication DTM, included, enables device configuration using third-party FDT Frame Applications and library of Emerson Device DTMs. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Controls & Controllers

EtherCAT Closed Loop Control works with pulse/direction drives.

June 26, 2014

Operating under any ACS EtherCAT® master and acting as EtherCAT node, PDICL enables system performance upgrades without requiring complete redesign. This 121 x 100 x 48 mm, 2- or 4-axis EtherCAT pulse/direction drive interface module specifically delivers position verification/closed loop control of stepper and servo drive/motor combinations with pulse/direction input. Module supports up to 4 axes with up to 4 digital encoders (incremental or absolute) at max speed of 50 million counts/sec. Read More

Computer Hardware & Peripherals

USB-to-RS422/RS485 Adapters offer 10 kV ESD protection.

June 25, 2014

Offering plug-and-play installation, single-port Model ES-U-2001-S incorporates automatic transmit and receive control for 2-wire RS485 half-duplex mode. Model ES-U-2001-STB has same features and functionality, but with 5-pin terminal block connector included which facilitates wiring process. Suitable for connection with either USB 1.1 or 2.0 hosts, adapters' high-speed serial ports are capable of data rates from 300–921.6 kbps. Both have built-in termination and biasing mechanisms. Read More