GAO RFID Inc.
Toronto   Canada
Sep 30, 2008 Active UHF Beacon tag can send data to mobile or fixed reader at non-line-of-sight distances of up to 300 ft. Static data are written on tag and sent at programmable interval without requiring request from reader. Available for standard North American and European ISM band frequencies, tag has configurable ping rate, tracks mobile assets, controls access or online inventory, and localizes assets/personnel in designated areas.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Sep 25, 2008 Covering entire UHF bandwidth (850-965 MHz) in single device that complies with EPCGlobal C1 G2 standard, LXMS31 series MAGICSTRAP(TM) is inductively coupled to antenna that has been designed and integrated into PCB. No electrical contact is necessary, allowing unit to be adhered to PCB using glue/sticky tape. Suited for product inventory control and supply chain management, it measures 3.2 x 1.6 mm with maximum height of 0.7 mm, and features high tolerance against ESD over 10 kV.

GAO RFID Inc.
Toronto   Canada
Sep 18, 2008 Eliminating interference from metals/liquids, Series of 3 passive UHF (Gen 2) RFID tags are used for supply chain management and high-value asset tracking, and come with standard label covering finish/ruggedized rigid case finish. Max is effective for long-distance applications and has read range greater than 40 ft. Featuring read range greater than 16.5 ft, Flex is functional for medium-distance assets, while Prox suits short-distance IT assets and has read range greater than 8 ft.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Sep 18, 2008 Supporting RF antennas as small as 38 x 28 mm, RF-HCT-WRC5-KP221 secure multi-purpose contactless chip/module combines security with flexible and configurable memory that supports up to 5 applications on one contactless card or token. This ISO/IEC 14443 Type B chip offers dynamic encryption via NIST-approved Triple DES and SHA-1 crypto-algorithms as well as ANSI X9.63 based session key security. Also, 128-bit unique session key is generated for each transaction.

GAO RFID Inc.
Toronto   Canada
Sep 17, 2008 Suited for asset locating and tracking and warehouse inventory management applications, 2.4 GHz active beaconing RFID tag has LED that flashes when tag receives specific signal from RFID reader. Featuring tamper-proof alarm that sounds if tag is dislodged, it can be mounted on metal and operates in harsh environments. It offers 100 tag/sec identification rate, 2,000 tag management in RF field, bi-directional reader communication, and transmits ID every 2 sec.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Sep 03, 2008 Made of silicon or PC material, One-time RFID Wrist Band - 03 products are used in hospitals for patient and newborn baby tracking. One version operates at 13.56 MHz or 125 KHz frequency and offers read/write range of 1-10 mm. Data maintenance is rated at 10 years, and EMS memory can be wiped and written more than 100K times. Also available, UHF Frequency (860-960 MHz) version operates in FHSS or fixed frequency operating mode and has 10 cm to 2 m read/write range.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Aug 26, 2008 Available in 125 kHz or 13.56 MHz operating frequencies, HF Metal Tag-05 measures 3 mm thick and is constructed with magnetic material and epoxy. Ironside has read range up to 5-7 cm on metal and can be affixed to any metal surface by using industrial adhesives. Designed for harsh conditions and suitable for close-quarters checking on-metal tagging applications, unit offers contactless read and write operation and works in temperatures from -10 to +50ºC.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Aug 25, 2008 Able to be used for patient care and tracking in healthcare environments, GEN 2 RFID Wristband addresses need for on-the-wrist RFID tag with generous read range. It is constructed from 100% pure silicone, making design non-allergenic, hygienic, and comfortable to wear. Designed using ISO 18000-6 compliant inlays, product offers read distances from 4.2-8.8 ft.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Aug 20, 2008 Engineered to provide read range of 5-6 m based on normal 860-960 MHz UHF RFID reader, UHF RFID Tag measures 114 x 39 mm, and can be integrated into RFID automatic garment management project. Developed for one-off use, tag utilizes ISO 18000-6B or ISO/IEC 18000-6C/EPC Class 1 Gen 2 protocols.

DATAMARS INC.
Peachtree City, GA 30269
Jul 28, 2008 Designed for manual sorting operations, PersonalChip RFID Laundry Tag operates on principle of multi-read high-frequency radio waves, which can be read through non-conductive material. Passive transponder transmits code, which identifies item without risk of error. Measuring 11 mm in diameter x 2 mm thick, chip can be read at distance of 20 cm and resists harsh environments of laundry processes, including sterilization and temperatures from -40 to +120°C.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 08, 2008 Utilizing half-duplex radio communication, 12 mm Multi-Usage Wedge Transponder and 24 mm LF Circular Inlay are suited for harsh and metallic environments. Able to be directly mounted on metal, transponder features 208 bits of user-programmable memory and password-protected write capability. Circular inlay, available with 80 bits of read/write memory or 64 bits of read only memory, is ISO/IEC 11785 compliant and can be encapsulated into variety of materials and form factors.

SOKYMAT AUTOMOTIVE GmbH
Reichshof-Wehnrath 51580  Germany
May 12, 2008 Glass-encapsulated tags operate from 125-140 kHz and can be attached to, or embedded within, object or animal to be identified without risk. While hermetically sealed design survives harsh environmental conditions, bio-compatibility make-up ensures sterile application. Tags are available with range of IC chips, including EM Marin's one time programmable EM4305 chip, which supports waste management and animal identification standards. Sizes range from 2.12 x 12 mm to 3.85 x 32 mm.

William Frick & Co.
Libertyville, IL 60048
Apr 18, 2008 Offered with read ranges of 5-12 ft using hand-held readers, and longer distances when read by fixed mount readers, SmartMark(TM) RFID Tags include offset, fully encapsulated, domed, and snap-around designs. Generation 2 passive solution provides reliable read-rates while mounted on radio-interfering metal surface, making them suited for cargo carriers working at US ports, airports, and rail yards. Tags can also be customized for specific applications.

Metalcraft, Inc.
Mason City, IA 50401 1468
Apr 04, 2008 With ability to withstand exposure to range of chemicals, water depths over 130 ft, and impacts as great as 20 tons, RFID Hard Tag offers read range over 10 ft. Measuring 5 x 1 in., it houses passive Gen2 KSW Windshield RFID inlay in ½ in. thick UV stabilized polycarbonate with clear window for internal label containing bar code or human readable ID numbers. Tag also features digital printing of interior label, allowing full-color logos and other information to be displayed.

GAO RFID Inc.
Toronto   Canada
Mar 26, 2008 Suited for retail and supply chain applications, Gen 2 AD 811 RFID Passive Bar Code Tag features EPC Class 1 GEN2 protocols, and operates in EU 865-868 MHz. Contactless read-write tag has capacity of 96 BIT EPC ID and 400 tags/sec max read quantity. Water and dustproof to IP67 and resistant to immersion in salt water, alcohol, oil, 10% HCL, and ammonia, ISO 18000-6C compliant tag offers 40-80% RH and -40 to +85°C and -25 to + 70°C storage and operating temperatures, respectively.

KSW Microtec AG
Dresden 01099  Germany
Feb 27, 2008 With read range of approximately 18 ft, Windshield Inlay uses passive RFID technology and Gen2 chip with 512-bit user memory. Inlay benefits commercial fleet operators of cars or trucks, as well as private vehicle owners requiring secure access and safe parking. It can also be used to control entry and exit gates to automotive services such as toll stations, car rental parks, or car washes.

GAO RFID Inc.
Toronto   Canada
Feb 27, 2008 RFID wristband overcomes distance limitations inherent when Gen 2 tags are placed on human body. Made of durable and non-allergenic silicon, wristband is designed for uniform operation globally from 860-960 MHz. Gen 2 Band is suited for health systems for patient care, event management for attendee tracking, theme parks for admission or access control, ski operators or any other setting requiring read distance greater than that offered by 13.56 MHz technology.

Metalcraft, Inc.
Mason City, IA 50401 1468
Jan 08, 2008 Comprised of adhesive label with non-adhesive folding tab that offsets inlay, Flag Tags are useful for blade servers and other metal-surfaced assets or liquid storage containers. Tags are intended for use and re-use in demanding environments and offer read range up to 25 ft. Each is customizable with variable data printed on subsurface and programming of RFID inlays.

SkyeTek, Inc.
Boulder, CO 80301
Dec 14, 2007 ©Featuring SkyeTek's M2 SkyeModule and Atmel's cryptographic RF tag assortment, CryptoRF® Demonstration Kit allows for complete demonstration when integrating secure RFID into applications/products. SkyeModule M2 reader provides support for TDEA and AES encryption and SHA-1, SHA-2, and MD5 hashing, while CryptoRF tags provide security through use of hardware embedded cryptography to offer mutual authentication, data encryption, Message Authentication Codes (MAC), and encrypted passwords.

Atmel Corp.
San Jose, CA 95131
Dec 11, 2007 With mutual authentication capability and up to 16 individually configurable zones, CryptoRF® 13.56 MHz RFID Labels and Tags prevent product counterfeiting and are virtually impossible to copy. Units create unique signatures based on information that is never transmitted or allowed to be accessed in any way. With 1-64 Kbits of user memory, complete history of product's ownership, distribution, and disposition can be contained in single device.