American LED-gible, Inc.
Columbus, OH 43228 3655
Apr 13, 2004 Model EL-2800-902 consists of 24–30 characters wide unit with double-sided viewing. It displays alphabetic and numeric characters in 1 line of 4 in. text, static or scrolling. Firmware PP-2111-189 implements DF1CRC protocol, which makes it possible to use Allen-Bradley communication modules to connect marquee to ABEthernetIP or Controlnet networks.

Panamax
San Rafael, CA 94903 2046
Jan 26, 2004 Panamax MAX® 5410 Pro custom, installer-centered component distributes clean power to systems in automated homes and features RS-232 interface for home automation system compatibility. It has 12 V-in and -out triggers that control start-up, shut down, and automation functions; surge protection; and component-specific power conditioning. Additional features include 6 LED diagnostic lights; backlit, analog Voltmeter with dimmer control; and front panel outlet.

Leviton Manufacturing Co., Inc.
Melville, NY 11747
Jan 16, 2004 Decora® Snap-on Wallplates include subplate that fits onto wiring device's mounting screws, eliminating need to use separate screws to attach subplate to wiring device. Once wallplate is positioned over subplate, it manually ratchets into place. Impact-resistant, polycarbonate units come in 1-6 gang configurations in variety of colors. Seamless design keeps them cleaner than wallplates with seams that can trap dirt.

Cooper B-Line
Highland, IL 62249-1331
Nov 04, 2003 C-Port Series Supports, made from recycled rubber, are non-penetrative and weighted to eliminate floating. They extend roof life, dampen vibrations, and eliminate need for supplemental rubber pads. Approved for any type of roofing material or other flat surfaces, UV-resistant supports are suited for refrigeration piping systems, HVAC equipment, roof walkways, conduit, and underfloor applications.

Outwater Plastics Industries, Inc.
Wood-Ridge, NJ 07075
Sep 30, 2003 Decorative Screening Panels are 6 ft wide x 2 ft high and come in range of visibilities. Materials include unfinished MDF, hardwood, pine veneer faced board, white PVC, brushed aluminum melamine, and unfinished mahogany or oak faced board. Panels can be painted and finished and are suited for furniture, interior walls, ceilings and doors, cabinetry, and store fixtures.

Dortronics Systems, Inc.
Sag Harbor, NY 11963
Sep 18, 2003 Expandable in zone increments, 7200 Series Annunciators feature flexible design that can be configured from component menu to provide precise monitoring and control of hundreds of doors and zones. Annunciator panels are available in 4- and 8-zone configurations for console or rack-mounted use and can be hard wired or multiplexed. LEDs for each zone visually indicate door status. Doors can be remotely unlocked to allow momentary access or extended free access.

Dortronics Systems, Inc.
Sag Harbor, NY 11963
Sep 17, 2003 Mini-Box 5236 and 5246 Series Push Button and Key Switch Consoles electrically operate entrance control systems, alarms, and electric locks. Configurations include push buttons, key switches, toggle switches, and LEDs. Suited for controlling single or multiple door access into buildings with electromagnetic locks or strikes, 5236 Series units provide push button operation of 1–3 doors, while 5246 Series units incorporate key and up to 4 push buttons.

Porta-King Building Systems
Earth City, MO 63045 1211
Sep 11, 2003 IBC 2000 compliant mezzanines feature pre-welded clips for all structural connections, panelized guard rail systems, and pre-welded stair assembly. Gussetted beam seats for beams and girders simplify positioning of heavy structural components.

Leviton Manufacturing Co., Inc.
Melville, NY 11747
Sep 10, 2003 DHC Scene-Capable, Plug-In Receiver Module features illuminated locator button that glows when unit's attached load is OFF and provides local ON/OFF switching of attached loads. Module is rated 15 A, 1,800 W and provides 2-way communication with status-tracking-capable controllers and programmers. Protected memory maintains ON/OFF status of connected loads and address programming when minor power interruptions occur.

Nana Wall Systems, Inc.
Mill Valley, CA 94941 2551
Aug 28, 2003 Made of modular, 3 x 8 ft glass panels, framed in rugged extruded aluminum, Nana Wallâ„¢ SL72 glass-wall system withstands hurricane-force winds, rain, and flying debris. System can comprise any custom size up to 36 ft wide, allowing entire wall, or one portion of it, to be folded away and stowed at sides. Configurations include in-swing and out-swing, different folding directions, and double French doors. Locking mechanism engages multiple points simultaneously.

Garon Products, Inc.
Wall, NJ 07719 1924
Aug 22, 2003 Non-shrink TREFLITEâ„¢ bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are required for application. Each 5 gal pail covers 40 ft² at 1/8 in. deep.

Crossfield Products Corp.
Roselle Park, NJ 07204 1402
Aug 12, 2003 Dex-O-Tex Electro-Flor coating systems are offered in static dissipative or conductive range. Static dissipative range drains static charges from personnel and eliminates charge generation. Conductive range carries electrical charges to ground in potentially flammable or explosive areas, with electrical resistance of 25,000–1 million ohms. Both chemical-resistant epoxy systems consist of bondcoat and topcoat and can be applied in thicknesses from 7–12 mils.

Revere Products
Cleveland, OH 44135 0311
Aug 12, 2003 Water-based EPOXI-COAT contains no flammable solvents, has no unpleasant odor, and is chemically resistant. Able to be applied without interrupting plant operations, product is ready for light foot traffic within 24 hr. It also works as protective topcoat or primer under other urethanes or epoxies. Available in Tile Red, Medium Gray, Dark Gray, or Tan, coating meets National V.O.C. Emission Standards and is USDA accepted.

Greenheck Fan Corp.
Schofield, WI 54476 0410
Aug 08, 2003 With blade depth of 7 in., EHH-701 horizontal blade, wind-driven rain louver protects against weather infiltration. When subjected to accelerated wind-driven rain test of 50 mph wind and 8 in. rain/hr, product maintains Rain Rejection Effectiveness Class of A with 99.9% rain rejection.

Cornell Rolling Door Specialists
Mountaintop, PA 18707
Aug 07, 2003 CrossingGardâ„¢ helps architects and building owners to provide secure access control and fail-safe automatic opening response to emergency conditions. Under normal circumstances, security is provided via AutoLock anti-lift device. When crisis strikes and alarm is sounded, motorized product automatically clears path and allows escape without delay. Product is available in built-to-order configurations, materials, and finishes to meet various aesthetic preferences.

USG Corp.
Chicago, IL 60680-4678
Aug 01, 2003 READYROCKâ„¢ Liquid Gypsum and Liquid Composite are pre-mixed slurries that remain in liquid state indefinitely. When ready for use, READYROCK activator is added to slurry to begin setting process. Set times can be adjusted from 6 min to 2½ hrs by varying amount of activator. Both products offer dust-free solutions for statuary casting. Liquid Composite is for exterior, not-water-holding applications. Products are non-toxic, non-allergenic and odorless.

Grace Construction Products, A Unit Of W.R. Grace & Co.
Cambridge, MA 02140-1692
Jul 24, 2003 Incorporating Advanced Bond Technologyâ„¢, Florprufeâ„¢ is made of chemical-resistant polyolefin sheet, reinforced with non-tacky adhesive coating. It comes in 4 x 115 ft kick-out rolls, which are applied over leveled and compacted base. When liquid concrete is poured over membrane, pressure-sensitive adhesive forms continuous, integral bond to concrete. Florprufe maintains adhesion to slab, even in cases of ground settlement.

Georgia-Pacific Corp.
Atlanta, GA 30303-1801
Jul 21, 2003 Clutter Cutter® panels support shelves, bins, and individual tools and utensils, keeping frequently used items within reach and less often used tools out of the way and organized. Installed with glue nailing over ¾ in. furring strips, panels require solid framing on all edges; intermediate framing must be spaced 16 in. o.c. or less. They can be cut to size and shape with woodworking tools. Products come in white but may be sealed or painted.

Lloyd Industries Inc.
Montgomeryville, PA 18936
Jul 15, 2003 Roof curb products incorporate overlap-joint construction, which reduces ability of rain to penetrate vulnerable corner areas. Additional construction characteristics include fully welded, water-tight seams; minimum 16-gauge galvanized steel; and factory-installed fiberglass insulation. Products can be built to accommodate HVAC equipment, exhaust systems, and access panels.

Enpac Corp.
Eastlake, OH 44095
Jul 10, 2003 STORM SENTINEL™ Adjustable Catch Basin Insert eliminates non-point-source oil and other contamination of water supplies. Insert, with optional Non-Leaching Co-Polymer sock, traps oil, grease, sediment, litter, and debris carried in runoff. Self-supporting product, made of 8 oz, non-woven, geotextile fabric, has overflow rate of 300 gpm max. Rectangular type fits drains from 16 x 20 to 24 x 36 in, while round type fits drains with 27–29 in. diameter.