Explosionproof LED Drop Light has in-line transformer.
Able to run off of 120 V, with inline step down transformer to 12 V, EPL-FL1524-LED-120X12-C1D2-100 hazardous area work light produces cool, glare-free, shadowless light via 15Ã- W LED bulb and is FM approved for Class 1, Division 1Ã- and 2 areas. This 2 ft long light, supplied with 100 ft of explosion proof cord, has non-sparking aluminum casing, unique rod cage, and built-in metal...
Read More »Unique Application Creates Innovative Ergonomic Lift Table Solution
Guelph, Ontario, Canada – In October of 2013, Pentalift was approached by a large provider of contract sterilization using gamma irradiation. The company was looking for a solution to their unique application which would pair a man lift, or work platform, with a pallet lift. Both units would need to be controlled by a single custom control panel located on the work platform, as would the...
Read More »Innovative Zylight Selected for Investment and Support from Lighting Leader Ushio America
LOS ANGELES – Zylight LLC., a privately-owned manufacturer of intelligent LED lighting instruments for the cinema and broadcast production industries was selected by specialty and general market lighting leader Ushio America, Inc. to receive a strategic investment that brings additional funding and infrastructure support to Zylight. This partnership allows Zylight to accelerate our speed in...
Read More »Modular LED Street Lights replace existing MH/HPS fixtures.
Dimmable from 15%–100% of max brightness, ETL-listed and RoHS-compliantÃ- Series SLM00 conform to IESNA Type III pattern, providing full cutoff, and is available in 5000K pure white LED light color. LED lifespanÃ- is 50,000+ hr, and lights support 120–277 Vac input. Available inÃ- 65–310 W configurations for replacing 150–1,000 W MH/HPS lighting, these replacements offer lumen...
Read More »Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics
To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.
Read More »Weatherproof LED Drop Light can be moved to wherever it is needed.
Resistant to shock and impact, FTL-3-LED-25 employsÃ- 50,000 hr LED T8 bulb that produces 1,277 lm of light and does not require any ballast to operate. Polycarbonate lens in bulb diffuses light, aluminum housing serves asÃ- heat sink, and handle and end are finished withÃ- polyoxymethylene plastic. Supporting 110–277 V operation, this 14 W light comes with drop hook and 25 ft of...
Read More »Extendable Light Mast produces long, wide flood pattern.
Equipped with two 1,500Ã- W metal halide lamps that produce ~150,000 lm of light each, LM-16-FM-2X1500W-EW features 16 ft extendable light tower andÃ- 1,000Ã- lb-rated, 120Ã- V Dutton Lainson electric winch. Lamps have 19 in.Ã- reflectors and are constructed of aluminum withÃ- clear tempered glass lens secured into place with heavy-duty gasket and single ring lock....
Read More »LED Downlights consume 12.5 W and last up to 22 years.
Available in 4 and 6 in. models, Halo Surface LED Downlights incorporate WaveStream™ LED technology, which transforms LED point source into efficient luminous panel, allowing units to perform and look like traditional recessed downlights. Laser-precise AccuAim™ optics arranged in exacting patterns provide brightness control while delivering maximum amount of light on task. Featuring 0.7 in.,...
Read More »LED Linear High Bay Fixtures are DLC-qualified.
Supplied in 22-gauge, cold-roll steel housing for thermal management,Ã- BayMAX™ LED Fixtures are designed to replace T8 and T5 fluorescent fixtures and up to 450 W pulse-start metal halide fixtures. Units come in 110, 160, and 250 W models that deliverÃ- up to 11,000, 16,000, and 22,000 lumens, respectively. Reflector controls light distribution and maximizes output, while topside...
Read More »IR Aspheric Lenses provide diffraction limited focusing.
Suited for IR lasers, thermal imaging, or FTIR spectroscopy, TECHSPECÃ-® IG6 IR Aspheric Lenses are made of IG6, which consists of germanium-free chalcogenide material comprised of elements arsenic and selenium. IG6 offers optimized transmission with minimal dispersion and low dn/dt. Uncoated lenses are available in 25 mm diameter models with focal lengths of 12.5 mm or 25 mm, and 50 mm...
Read More »Commercial Grade LED Downlights meet CEC requirements.
Comprising of 6 in., 16 W and 4 in., 12 WÃ- downlights, TITANIUM LED CRISP SERIES 3.0 complies with California Quality Specification (CEC) with typical values that include CRI of 92 and R9 of 60. Dimmable fixtures produce color temperatures that fall within 4-step Macadam ellipse. While 6 in.Ã- downlight replacesÃ- 75 W incandescent and comes in 2700K and 3000K CCTs, 4...
Read More »Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »