Imperial Systems, Inc.    Jackson Center, PA 16133
Apr 26, 2013 Designed with no external bolts, CMAXX™ Compact Modular Cartridge Collector eliminates leakage and corrosion. Design also removes flat spot, stifling dust and weather-related buildup, while incorporating slanted inlet for equal air distribution across enclosed filters. Side access door comes standard to ensure that inlet baffles remain clean and unobstructed by debris. Constructed with DOT/UV Grade silver pulse-valve tubing, CMAXX offers expandable solution for almost every machining operation.

Oneida Air Systems Inc.    Syracuse, NY 13204
Feb 18, 2013 Super Dust Deputy can turn single-stage, 1.5–3 hp dust collector into cyclonic collector. Molded, static dissipative plastic cyclone separates over 99% of waste before it reaches collector, preventing filter clogging and keeping airflow consistent. At 27 in. tall, cyclone can be attached to any sturdy, air-tight dust container. With 5 in. inlet and 6 in. outlet, product installs between tool and collector using appropriate diameter flex hose.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jan 24, 2013 In addition to MERV 15 rating, HemiPleat® eXtreme Nano Fiber Filter is also available with MERV 16 media that delivers efficiency of 99.999% on 0.5 micron and larger particles by weight. Tri-layer technology is used to apply 2 layers of fine-pored nano fibers that act as pre-filter to base media, capturing most of dust at surface before it imbeds in filter. Open-pleat design optimizes utilization of media pack, while double gasket around perimeter prevents dust from accumulating on top of pan. 

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jan 07, 2013 Available in 18, 24, and 30 in. versions, Sanitary Bag Dump with Integral Dust Collector optimizes particulate containment by providing substantial vacuum below bag dump screen rather than above, pulling dust down and away from operator. Several sanitary features enable use in food and baking industry where dust collector and plenum need to be cleaned between batches, and are also desirable for pigment industry to prevent batch to batch contamination.

Airflow Systems, Inc.    Dallas, TX 75243 8314
Dec 19, 2012 Equipped with dynamically balanced, non-sparking, all-aluminum motor, PCH Series provides source-point collection of airborne contaminants such as dust, fumes, weld smoke, odors, and oil mists. E-Z Arm® external arm support eliminates air flow resistance common with internally supported arms. PCH-1 model, available with 0.5, 1.0, or 1.5 hp motor, is capable of air flow rates up to 800 cfm, while PCH-2 model comes with 1.0, 1.5, or 3.0 hp motor and supports up to 1,200 cfm.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Dec 12, 2012 Featuring modular construction, Gold Series® has reinforced door with double-thick hinges, and single flat inside panel to create smooth, air-tight gasketed seal. Fans are equipped with damper actuator handle that allows user to see from ground level whether damper is open or closed. Inside collector, gaskets have been moved to edges of pan so that no dust builds up on vertically mounted filters. Additional features include touchscreen controls, spark diverter inlet, and diaphragm silencer.

United Air Specialists Inc.    Cincinnati, OH 45242 2832
Jun 15, 2012 Featuring self-contained design, SDC Series collects airborne pollutants at source, helping to ensure safety of students and employees while achieving OSHA and NFPA regulatory compliance for combustible and explosive dusts. High-frequency, oscillating mechanism shakes filter to dislodge dust cake, eliminating need for compressed air. Capable of removing up to 99% of dust by weight, systems have modular cabinet design that allows for field expandability to increase capacity as needed.

Imperial Systems, Inc.    Jackson Center, PA 16133
May 15, 2012 Capable of full integration into CMAXX dust and fume cartridge collector systems, and located prior to collector, GreCon technology will detect spark or fire at any given location in processing system after shredding or grinding machinery. When spark is detected by sensors, system uses atomized water nozzles to quench fire hazards. GreCon operates during material processing, and in most cases, delivers effective detection and extinguishment without system shut-down, clean-out, and re-start.

Size Reduction Specialists, Corp. (SRS)    East Lansing, MI 48823
Jan 12, 2012 Capable of regrind throughput rates to 1,800 lb/hr with standard screen size of .125 in., SRS Deduster enhances molding procedures via removal of dust, powders, and fines from regrind or virgin material. System uses rotating tumbling process, sometimes with vacuum assist, and facilitates servicing/cleaning with full accessibility via tiltback cover. For operation, deduster requires 110 V single-phase or 230/460 3-phase electrical.

Makita U.S.A., Inc.    La Mirada, CA 90638
Sep 27, 2011 Designed for use with Makita 4 ½-5 in. Grinders, Dust Collecting Cutting Guards are suited for variety of concrete and masonry applications. Model 192618-2, featuring cast aluminum construction and large lip for stable plunging, has direct-connection dust port for use with most commercial vacuum hoses. Featuring steel construction, Model 192972-4 offers tool-less depth adjustment, large shoe for stability, and hose adapter for most commercial vacuum hoses.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jun 17, 2011 Gold Series® Cartridge Dust Collectors use optional HEPA safety monitoring filter to prevent collected dust from re-entering workspace in event of leak in primary filtering system. Each module incorporates 2 HEPA filters capable of handling 2,500 cfm of air per filter and rated to remove 99.97% of airborne particles 0.3 micron and larger. Unlike after-filters that are installed downstream of fan with filter at positive pressure, Gold Series' design maintains after-filter at negative pressure.

Quaker Chemical Corporation    Conshohocken, PA 19428
Jun 16, 2011 Comprised of wetting agents that accelerate water penetration in areas where dust poses hazard, DUSTGRIP(TM) TURBO reduces total water volume consumed for dust suppression purposes. It mixes with water and can be used with mine's existing equipment; no post-application rinsing of equipment is needed. Repeated applications have cumulative effect, maintaining subsoil moisture content for extended periods depending on soil types, traffic, and weather conditions.

Process Environments    League City, TX 77573
Jun 01, 2011 Featuring all-welded, heavy-gauge steel design for both indoor and outdoor use, PowerCore® VH Series handles abrasive dust applications from 5,000-50,000 cfm. System utilizes MERV 13-rated filter packs, which take Ultra-Web® nanofiber filter media and form it into flutes that collect particles without depth-loading. Filters can be replaced from side of collector with no need for tools or entrance into confined spaces.

Donaldson Australasia Pty Ltd    Wyong   Australia
Apr 26, 2011 Available in standard and anti-static versions, PowerCore CP Series can replace traditional baghouse technology for dust collection in industrial, grain handling, cement, plastic, and wood industries. UltraWeb nanofiber surface loading technology with corrugated, fluted media optimizes particulate collection efficiency. Featuring built-in handles, filter packs facilitate change-outs, which are accomplished in minutes without tools.

Makita U.S.A., Inc.    La Mirada, CA 90638
Feb 09, 2011 Designed to work with Makita SDS-PLUS corded/cordless rotary hammers, Dustless Hammer Attachment 193472-7 features 17 in. hose, telescoping spring-loaded barrel, depth stop, bit size adjustment knobs, and built-in ruler. Grinder Dust Shroud 195236-5, intended for Makita 4 ½-5 in. grinders, has spring-loaded suspension system that keeps shroud flush to surface during movement and compensates for blade wear. Soft brushes help contain dust and allow for smooth movement over work surface.

Aerodyne - A Division of Abanaki Corporation    Chagrin Falls, OH 44023
Dec 20, 2010 Accommodating applications with limited floor space or overhead clearance, GPC Dust Collector is designed to optimize operational efficiency. Spiral inlet and ground-plate eliminate vortex reversal effect and subsequently required elongated body. Able to handle range of dry materials, horizontal/vertical product can reduce particulate emissions at processing plants, reclaim useful material from air/gas waste streams, and acts as pre-filter in front of baghouse filters.

Oneida Air Systems Inc.    Syracuse, NY 13204
Dec 20, 2010 Equipped with 5 hp Baldor motor and backward inclined fan wheel, Model V-5000 provides 1,498 cfm at 1.65 in. of static pressure. Unit features GE H12 certified HEPA media filter, which guarantees 99.97% filtration from 0.3-0.5 micron. Internal silencer quiets dust collector to 81 dBA at 10 ft. With 59 x 42 in. footprint and height of 90 in., Model V-5000 is suited for small spaces.

Flexicon Corporation    Bethlehem, PA 18020 8006
Sep 16, 2010 Pre-engineered and pre-wired, Bag Dump System collects dust generated during manual dumping and compaction of bags, and conveys bulk material downstream. System integrates receiving hopper, dust collector, bag compactor, and fully enclosed flexible screw conveyor, which handles free- and non-free-flowing bulk materials. Entire system is available mounted on frames with boom and casters, and is constructed of stainless steel finished to food, dairy, pharmaceutical, or industrial standards.

Donaldson Australasia Pty Ltd    Wyong   Australia
May 26, 2010 Model DB-800 heavy-duty welded cabinet unit has direct drive fan and provides 200 fpm minimum downward airflow to capture dust and fumes. Hinged side-wing panels open to accommodate longer work pieces, while fluorescent light illuminates work area and quick dust drawer access enables safe maintenance. Rugged unit includes galvanized manual shaker bar, cotton sateen EZ Filter Pack that installs without tools, and industrial-grade TEFC motor.

3M    St. Paul, MN 55144
May 07, 2010 Suited for use in body shops, 3M Dirt Trap Protection System provides complete paint booth solution that traps dust, dirt, and overspray to reduce defects in paint jobs. Adhesive-backed material is applied to wall and floor surfaces, and clear film protects lights and windows. Once material fills with debris, its removed and replaced. Applied onto walls and floors with magnetic dispenser, material allows installer to reposition during installation, which can take less than 2 hr.