Cooper Bussmann
Chicago, IL 60706-4792
May 24, 2005 Available in fusible or non-fusible versions, Edison® Air Conditioner Disconnect comes in pre-assembled kit with A/C disconnect, cable whip, box, and whip wall mounting hardware. Kit is also available with integrated GFCI receptacle to eliminate time associated with installing separate outlet to meet NEC® 210.63 and 210.8 ground fault requirements. Both units are UL Listed, CSA Certified, and padlockable.

Cool-Space, Inc.
Fishers, IN 46038
May 04, 2005 Designed for cooling individual workers as well as spot cooling in open spaces, COOLSPACE Jr. utilizes 3 in. thick cross corrugated cooling pads and 2-speed centrifugal blower. It provides up to 20° cooler air for hours with 12 gal reservoir. Stand-alone unit can also be connected to garden hose for automatic water level maintenance. Mounted on 4 casters, portable unit has recessed, rubber-matted top for tools and operates from 115 V electrical supply.

The NorthWest Group
Livonia, MI 48150
Apr 07, 2005 Available in 6 sizes, Knoll triple screw pump is capable of volumes up to 180 gpm and pressures to 1,750 psi. Pump is available as pump/motor package or as complete high pressure system including control valves, reservoir tank, and integral automatic filter.

ITW Vortec
Cincinnati, OH 45242-4719
Feb 01, 2005 Stainless steel Panel Guard™ Vortex Cooler™ Systems feature integral mechanical thermostat to maintain enclosure temperatures within range of 80–122°F. Vortex tube technology converts filtered compressed air into low pressure, refrigerated air stream distributed throughout enclosure. Delivering 1,500 or 2,500 BTUH of refrigeration, Panel Guard units are weatherproof, corrosion-resistant, and suitable for wash-down applications.

Cerro Flow Products, Inc.
St. Louis, MO 63166-6800
Dec 22, 2004 CerroSet™ Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with dry nitrogen and capped to ensure clean, non-oxidized tube prior to installation.

Universal Separators, Inc.
Madison, WI 53705
Dec 16, 2004 Able to recycle both coolant and washwater, SmartSkim® CoolantLoop™ is targeted for use in plants with individual coolant sumps. It incorporates SmartSkim® CrossFlow Separator, which removes oil and solids by gravity and without use of filters or coalescer media. Coolant circulates continuously within the system for multi-pass filtration and aeration. Available in 4 models from 300–1,200 gal, product processes up to 600 gph depending on model.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Oct 15, 2004 Coolescer™ Coolant Refresher takes place of skimmer and aeration system in portable package. Self-contained system removes tramp and hard-to-pick-up grey oils from machine tool coolant sumps, helping to elminate coolant odor. It pumps top ¼ in. layer of coolant and oil through coalescing cartridge where oil is separated from coolant and removed via oil discharge valve. Cleaned coolant is aerated and pumped back to coolant sump.

CLC Lubricants
Geneva, IL 60134
Jun 25, 2004 CLC Coolant 2449 does not contain any bacteriacides such as triazine and does not require treatment with toxic biocides. Able to be used on metals such as stainless, cast iron, steel, aluminum, and copper, full synthetic combines lubricity of soluble oil and cleanliness of synthetic with machinability of heavy-duty soluble. It contains additives resistant to biodegradation, rejects tramp oil, and has indefinite sump life.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.
Walpole, MA 02081
Mar 11, 2004 Pioneer integrated on-site coolant recovery system includes disc centrifugation and flash pasteurization to end rancidity, coolant odor, and dermatitis caused by coolant contact. Reduction of bacteria in coolants helps prevent development of endotoxins. Unit removes solids to 1 micron and tramp oil to 0.25%, and processes water-soluble and semi-synthetic coolants. It can return 95% of recoverable fluids for reuse.

ITW Vortec
Cincinnati, OH 45242-4719
Mar 11, 2004 With no moving parts, Cold Air Tubes™ convert compressed air into low pressure stream of cold air that reaches temperatures as low as -20°F. They kill heat buildup that can slow production or create problems on parts and equipment. At less than 10 in. long, maintenance-free cooling component is adaptable for numerous applications, with 3 models available offering different cooling capacities. Tubes provide quiet operation and instant on/off.

Baltimore Aircoil Co.
Jessup, MD 20794
Nov 20, 2003 Dual air inlet induced draft FXV products utilize dual coil bundles and wet deck heat transfer surfaces on one common fan system. Cells can be multiplexed side by side, and thermal performance is independently certified by Cooling Technology Institute. Design incorporates Combined Flow Technology, which joins heat exchanger and cooling tower into one unit. Process fluid to be cooled is kept clean in contaminant-free closed loop.

Baltimore Aircoil Co.
Jessup, MD 20794
Nov 03, 2003 Suited for industrial refrigeration applications, BAC Aircoil™ Evaporators incorporate hinged fan housings, aluminum or stainless steel drain pan construction, and integral coil/frame constructed of rectangular steel members. Housing materials are available in galvanized steel, stainless steel, or with BALTIBOND® Corrosion Protection System. They can be configured to meet performance requirements of specific applications.

American Allsafe
Tonawanda, NY 14150 2593
Apr 22, 2003 Available in bandanna or headband styles, Icy Blue Ones™ contain unique cooling crystals that provide up to 24 hr of heat relief. Products are soaked in cool water for 20 min to keep wearer refreshed and productive. Bandanna style ties around neck or forehead, and head-band style wraps around brow with hook and loop fasteners. Drybrow Sweatbands are Cool Blue Ones™ that keep users cool while preventing perspiration from running into their eyes.

Spraying Systems Co.
Wheaton, IL 60189 7900
Feb 07, 2003 AutoJet is designed around FloMax® air-atomizing nozzle and controlled by Model 2250 AutoJet Spray Controller, which is pre-programmed for gas conditioning applications. Controller manages closed loop system by regulating liquid and air flow to nozzles based on information provided by one or more temperature sensors. SprayLogic™ software ensures high level of reactivity and accuracy. Nozzles deliver optimal drop size without creating excess moisture.

Active Radiator Supply Company
Philadelphia, PA 19134
Jul 29, 2002 Heavy-duty radiator, designed for class 6, 7, and 8 trucks, withstands pressure changes to eliminate warpage common to plastic tanks. Bolt-on tank promotes integrity of tank-to-header seal and prevents unexpected breakdowns and premature failure.

Mayfran International
Cleveland, OH 44143-0038
Jun 19, 2002 ConSep 2000® II combination, single-platform chip conveyor/coolant separator removes chips and contaminates to 50 micron level. Features include self-cleaning backwash filter system, and cleaner for particulate removal to 10-15 nominal micron level. FastPac™ Briquetter processes 110 to 6,614 lbs of metal chips per hour (depending on model) and transforms material into dense, dry briquettes. Coolant recovery removes up to 98% of residual coolant and cutting oils.

Scale Free International
Fenton, MO 63026
Jun 11, 2002 Environmentally safe, non-chemical process eliminates bacteria, which will prevent slime and algae growth, plus scale and corrosion in cooling towers, chillers, boilers, hot-water storage tanks, or any heat transfer system. Process has no chemical, shipping, storage, or handling costs, requires no acid cleaning or rodding of condenser tubes, and has no FDA and EPA restrictions. It can be installed without changing existing systems.

Koolant Koolers, Inc.
Kalamazoo, MI 49001-4500
Jun 05, 2002 Custom-formulated, industrially inhibited K-Kool-E protects brass, copper, copper alloys, steel, cast iron, and aluminum. Inhibitor package neutralizes any corrosive acids while providing fluid stability. Operating temperature range is -60 to +250°F. K-Kool-E is available in 5 gal pails and 55 gal drums.

Lytron, Inc.
Woburn, MA 01801 1039
Apr 08, 2002 Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic boards. It applies consistent force across cold plate, ensuring good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant, Fluorinert(R), and other fluids to remove heat from high heat load discrete components.

ITW Fluid Products Group
Glenview, IL 60025
Mar 05, 2002 Rustlick® Ultracut 370R can be used for both machining and grinding. Heavy-duty coolant is formulated for wide range of ferrous and non-ferrous metals. It provides long sump life due to biostability and rust protection. Coolant is available in 5 and 55 gal containers.