Atlas Sales & Rentals, Inc.    Torrance, CA 90501
Feb 08, 2012 Measuring 34 in. wide, air-cooled PACSlim-12 provides 12 tons of cooling for offices, server rooms, event tents, and other indoor/outdoor locations. Radial blowers with built-in variable speed motors deliver uniform airflow across evaporator coil. Combined with acoustical insulation in evaporator section, blowers ensure minimal sound level. Housed in powder coated steel cabinet, spot cooler is available in 208-230 V or 460 V with operating range of 45-115°F.

DENSO Corp.    Aichi 448-8661  Japan
Feb 02, 2012 Without compromising on strength or performance, 16 mm wide radiator is sized to afford flexibility for installation in engine compartment while also promoting vehicle safety in case of frontal collision. Tank is made with environmentally friendly plant-derived resin, and efficient heat radiation is achieved via fin design with optimized number of louvers on surface. Material of construction for fins and tubes also promotes to overall efficiency.

Tellurex Corp.    Traverse City, MI 49686
Dec 29, 2011 Able to cool down to 45°C below ambient room temperature, MegaCool225 is designed for large heat pumping applications and accommodates needs of lab refrigerators/freezers and industrial enclosures. Unit may be used as cold plate contact cooler; as 700 BTU air conditioner, with attachment of matched air exchanger; and fluid loop cooler with attachment of matched fluid heat exchanger. Integrated technology also permits contents of enclosure to be warmed up in precise increments of 0.1°C.

Mokon    Buffalo, NY 14207
Dec 09, 2011 Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA 79 electrical safety standards, and features insulated nonferrous components on chiller side.

Laird Technologies    Chesterfield, MO 63017
Dec 08, 2011 Designed to circulate either water, water-glycol (anti-freeze), or transformer oil, self-contained Liquid Cooling Systems (LCS) remove heat from densely packed electronic environments by recirculating coolant to predefined temperature set point. Liquid heat exchanger systems cool to ambient, while recirculating chillers cool to temperatures below ambient. Standard heat transfer mechanisms are either liquid-to-air or liquid-to-liquid configurations.

GJ Chemical Co., Inc.    Newark, NJ 07105
Aug 10, 2011 Custom-blended to application requirements, GJ Therm provides freeze/burst and corrosion protection in closed heating and air conditioning systems. This industrial coolant and heat transfer fluid, comprised of inhibited ethylene and propylene glycol, is compatible with all manufacturers. Inhibitors remain at full strength despite system dilution requirements, and formula allows mixing with existing systems and topping off or adding to existing fluids without issues.

Mokon    Buffalo, NY 14207
Jul 25, 2011 BFC Series promotes blown film productivity, especially in warmer climates or environments where ambient air temperatures rise during summer, by eliminating production variables in air ring supply. Air inlet diffuser creates uniform airflow across cooling coil and decreases delta temperature approach, and insulated leaving air chamber reduces condensation while providing coldest air possible to air ring. Powder-coated, heavy-gauge steel cabinet is designed for 35 in. static pressure.

GlacialTech Inc.    Taipei   Taiwan
Jul 06, 2011 Intended for 65 W AMD CPUs with FM1/AM2/AM2+/AM3 sockets, Igloo A200 Series includes 3 models made of aluminum alloy that measure 68 x 76 x 42.3 mm and weigh 165 g. Included 12 Vdc fan measures 70 x 70 x 15 mm and operates, depending on model, up to 2,600, 3,200 rpm, or 1,200 PWM (±300 rpm) to 3,600 ±10%. Respectively, airflow values of 18.4, 22.4, and 27.6 ±10% cfm are achieved with noise ratings of 21, 26, and 34 dBA. In PWM version, fan speed increases with CPU load.

Weldcraft    Appleton, WI 54911
Jun 17, 2011 Available in 115/230 V versions, Models 2500SS and 2502SS have 2 gal reservoir, while Models 3500SS and 3502SS have 3 gal reservoir, and Models 6500SS and 6502SS include 6 gal reservoir. Closed-loop design with radiator recirculates coolant through fan-cooled heat exchanger to prevent system from overheating. Positive vane-style displacement pumps provide consistent coolant flow and pressure ratings, while thermally protected 1/3 hp motor provides additional protection against overheating.

CeramTec North America Corp.    Laurens, SC 29360
Jun 03, 2011 Made of aluminum nitride, CeramCool® Box provides efficient cooling for extreme packing densities. Temperature profile is consistent, with thermal conductivity of greater than or equal to 170 W/mK. Electric conductors are placed directly on ceramic heat-sink, forming permanent connection without thermal barriers or risk of delamination. At 1 mm, walls minimize distance between coolant and heat source to optimize heat transfer. Cooling water connections consist of one inlet and outlet.

Westinghouse Electric Co.    Pittsburgh, PA 15230 0355
Jun 02, 2011 When off-site electrical power or emergency diesel power is not available, Emergency fuel pool cooling system (EFPCS) removes decay heat from spent fuel pool during site emergencies. System consists of permanently installed, primary cooling loop inside reactor building or spent fuel pool building and mobile, secondary cooling loop stored off-site and located outside reactor building. This reduces time required for system assembly/startup while eliminating need to enter reactor building.

EXAIR Corporation    Cincinnati, OH 45249-1621
Apr 15, 2011 ETC(TM) Cabinet Cooler® System maintains temperature in electrical enclosure at constant level, slightly under max rating of electronics, to keep them cool while conserving compressed air. Equipped with digital LED readout that displays enclosure temperature, control activates circulation of 20°F air to prevent electronics malfunction when user temperature setting is exceeded. Automatic drain filter separator keeps moisture in compressed air out of electrical enclosure.

Kooltronic Inc.    Pennington, NJ 08534
Apr 13, 2011 Used to cool electrical/electronic enclosure interiors, 480 V Panel Mounted Air Conditioners come in NEMA 4 or 4X versions with capacities from 5,000-26,000 BTU/H for indoor and outdoor applications. Models feature epoxy-coated condenser coils and painted galvanized sheet metal and may be used in washdown and outdoor environments. While GuardianX Series adds stainless steel shell, all models are UL-/CUL-Listed and use either CFC-free R134a or zero ODP R410a refrigerant.

Dometic Environmental Corporation    Richmond, VA 23227
Apr 07, 2011 Self-contained air conditioning unit offers 15,000 BTU/hr and provides engine-off cooling and heating for trucks, buses, ambulances, and other specialty vehicles. Running on 120 Vac electricity from shorepower connection or diesel generator, it features 2.5 kW heating capacity as well as cooling, and can be installed in vehicle undercarriage bay or storage locker. Compressor, condenser, and evaporator are mounted on compact chassis with shock and vibration isolation and aluminum sound shield.

Thermacore Inc.    Lancaster, PA 17601
Mar 16, 2011 Designed to meet VME64x/VPX standards, Cold Plates are available in 3U, 6U, and 9U formats. Baseline aluminum cold plates are produced from aluminum alloys such as 6061 and 6063 with thermal conductivity values of 166 and 201 W/m. k-Core® models, encapsulating Annealed Pyrolytic Graphite with same aluminum alloys as basic models, deliver up to 6x conductance. Embedded Heat Pipe options are constructed from solid aluminum with integrated heat pipes to remove hot spots.

Mokon    Buffalo, NY 14207
Feb 24, 2011 With ambient temperature range of -25 to 105°F, Iceman Outdoor Air-Cooled Chillers utilize scroll compressor for quiet operation and are designed for exterior installation, freeing up indoor floor space. Units feature nonferrous components, advanced microprocessor control technology with digital readout, NEMA 4 or 4X remote or local enclosures, and painted steel or stainless steel cabinetry. Chillers utilize Green friendly refrigerant and meet NFPA 79 electrical safety standards.

McQuay International    Minneapolis, MN 55440
Feb 03, 2011 Featuring oil-free, magnetic bearing design, 700-ton Daikin McQuay® Magnitude(TM) centrifugal chiller offers Integrated Part Load Value as low as 0.306 kW/ton, while full load efficiency is 0.532 kW/ton. Product utilizes R-134a refrigerant and has no ozone depletion potential. It is also IBC certified for seismic installations to remain online and functional after event, and is suited for use in universities, hospitals, manufacturing facilities, and data centers.

Lydall, Inc.    Manchester, CT 06045
Jan 24, 2011 Suited for industrial and laboratory settings, S-Series includes 4 models with extended temperature range of -10 to 30°C and ±0.1°C temperature stability. Units are available with copper or stainless steel wetted materials, ergonomic operator interface, and process alarms that protect equipment and production output. Multiple communication options enable remote monitoring and control.

APW-Thermal Management/McLean    Champlin, MN 55316
Dec 31, 2010 Designed to deliver vital cooling to sensitive electronics within enclosures, SPECTRACOOL(TM) Air Conditioners feature dust-resistant treated coil, supporting filterless operation in most environments. Models provide 4,000, 6,000, 8,000, 12,000, and 20,000 BTUs/hr of cooling and operate on 115, 230, or 400/460 3-phase Vac power input. Utilizing R134A earth-friendly refrigerant, air conditioners are equipped with rotary compressors, which allow restart under pressure without damage.

Laird Technologies    Chesterfield, MO 63017
Dec 23, 2010 Designed for outdoor enclosures and kiosks, AA Outdoor Series comprises Air-Air Thermoelectric Assemblies that use impingement flow to transfer heat. Units cool or heat enclosures via convection have integrated controller with predetermined setpoints. LK-81 configurations are programmed to cool when internal temperature of enclosure exceeds 25°C and heat when it drops below 10°C, while LE-80 models cool when internal temperature exceeds 35°C and heat when it drops below 5°C.