Parker Hannifin Corp., Instrumentation Connectors Div.    Huntsville, AL 35803-2197
Jan 18, 2012 Protecting temperature instruments from damage due to pressure and velocity, Thermowell Sensor Assemblies consist of connection head, spring fitting or nipple union nipple, RTD or thermocouple, and thermowell. They are available in threaded, flanged, VanStone, socket weld, weld-in, and sanitary styles, and thermocouple types in calibrations of J, K, T, and E meet NEMA 4X requirements. Temperature ranges for RTDs are from -328°F to 1,112°F and for thermocouples -328°F to 2,300°F.

Allpax Products, Inc.    Covington, LA 70433
Jan 18, 2012 Allpax waste-steam recovery system reduces energy expenditure and water consumption to address overall facility sustainability. In new installations or as retrofit, system captures come-up vent-open waste steam in vented tank where steam condensates into hot (200°F) water that can be used to supplement hot water demands or run through heat exchangers for other plant processes. Vented collection tank is pressure neutral, and heat recovery system with pressure sensors is PLC controlled.

Seats Incorporated    Reedsburg, WI 53959
Jan 17, 2012 Promoting driver comfort in cold climates and even providing therapeutic assistance for back muscle pain, Do-it-yourself (DIY) plug-in seat heater can be installed in less than 5 min and regulates heat to 110°F. U.S.-manufactured, Class 6, 7, 8 truck seating accessory comes ready-to-use. After installation, heater plugs into truck's 12 V accessory/cigarette outlet.

Pad Print Machinery of Vermont    East Dorset, VT 05253
Jan 16, 2012 Along with 300 cfm airflow and ability to connect to 2, 2.5, and 4 in. dia hoses, Clean Air 300 uses combination HEPA and carbon tray for maximum removal of fumes and gases with high particulate content. This piece of auxiliary equipment comes standard with filter monitor gauge and swivel casters. Latter, along with low-noise, compact design, enable placement anywhere within production environment.

Size Reduction Specialists, Corp. (SRS)    East Lansing, MI 48823
Jan 12, 2012 Capable of regrind throughput rates to 1,800 lb/hr with standard screen size of .125 in., SRS Deduster enhances molding procedures via removal of dust, powders, and fines from regrind or virgin material. System uses rotating tumbling process, sometimes with vacuum assist, and facilitates servicing/cleaning with full accessibility via tiltback cover. For operation, deduster requires 110 V single-phase or 230/460 3-phase electrical.

Tellurex Corp.    Traverse City, MI 49686
Dec 29, 2011 Able to cool down to 45°C below ambient room temperature, MegaCool225 is designed for large heat pumping applications and accommodates needs of lab refrigerators/freezers and industrial enclosures. Unit may be used as cold plate contact cooler; as 700 BTU air conditioner, with attachment of matched air exchanger; and fluid loop cooler with attachment of matched fluid heat exchanger. Integrated technology also permits contents of enclosure to be warmed up in precise increments of 0.1°C.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Dec 22, 2011 Installed on single gang wall box, 2.8 in. Model TPMC-3SM works with Crestron Fusion RV(TM) software to deliver room scheduling solution for office buildings. LCD provides view of each room's availability and lets users select room location, meeting time, and AV presentation resources needed. For home control, Model TPMC-3SMD offers customizable touchscreen graphics and icons for controlling lights, temperature, home theater, multiroom audio, security cameras, and iTunes® libraries.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Dec 21, 2011 Offered in 250 and 300 hp models, ESD series provides flows from 816-1,522 cfm and pressures to 217 psig. One-to-one direct drive design includes efficiency-oriented drive motor with three PT 100 temperature sensors. All models come with Sigma Control 2 intelligent compressor control and variable-speed fan for fluid cooler. Latter helps conserve energy by adjusting to cooling demands, while removable panel and 5 access doors optimize maintenance accessibility.

Sioux Corp.    Beresford, SD 57004
Dec 19, 2011 Designed to heat large volumes of water for ready-mix concrete plants, 3 million BTU/hr Sioux Hybrid Water Heater(TM) achieves 208°F outlet temperature at 95% + true efficiency. Media section promotes efficiency, while coil section allows heater to reach elevated temperatures without discharging steam from exhaust stack. Built to ASME Code, water heater ships complete with no assembly required and offers recirculation mode to maintain storage tank water at adjustable temperature setting.

BriskHeat Products(BH Thermal Corp.)    Columbus, OH 43201
Dec 16, 2011 With Centipede 2®, each heater in system has its own PID temperature controller and RTD sensor, optimizing temperature uniformity across system. Controllers network together to touchscreen interface for global programming and monitoring. In addition to standard module design, Centipede 2® is available in DIN-rail STACK(TM) version which features 3 zones of temperature control per module and connects to PLC or external computer, suitable for applications with up to 512 zones.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Dec 15, 2011 Available in 5 models, FILTAIR Industrial Centralized Weld Fume Extraction Series is customizable to variety of welding cells and applications. Units combine TruLock(TM) Filter technology with MERV 15 nanofiber filter pack to capture up to 95% of particles ranging from 0.2 to 1 micron. TruLock technology uses surface webbing of small fibers to capture weld fumes on surface. To extend filter pack life, systems include online and offline Linear Jet Automatic Cleaning System.

Mokon    Buffalo, NY 14207
Dec 09, 2011 Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA 79 electrical safety standards, and features insulated nonferrous components on chiller side.

Laird Technologies    Chesterfield, MO 63017
Dec 08, 2011 Designed to circulate either water, water-glycol (anti-freeze), or transformer oil, self-contained Liquid Cooling Systems (LCS) remove heat from densely packed electronic environments by recirculating coolant to predefined temperature set point. Liquid heat exchanger systems cool to ambient, while recirculating chillers cool to temperatures below ambient. Standard heat transfer mechanisms are either liquid-to-air or liquid-to-liquid configurations.

GE Co.    Southfield, MI 48034
Nov 28, 2011 Used for industrial air filtration, SimPleat(TM) coreless filters can be used in diverse process applications up to 180°F. Design features one-piece unitary design and 100% spunbond polyester media with rigid pleat construction. Also included, iPLAS(TM) strapping system resists flex fatigue and pleat reversal. One-step installation process does not typically require any modification to existing industrial baghouse equipment.

Lochinvar Corp.    Lebanon, TN 37090
Nov 22, 2011 Designed to aid integration of KNIGHT® Heating Boilers into multiple temperature hydronic heating systems, SMART SYSTEM(TM) Multi Temperature Loop Control manages up to 3 separate space heating loop temperatures while optimizing efficiency of heating boiler as primary function. Accessory works in conjunction with on-board SMART SYSTEM Control on 2nd generation floor-standing and wall-mount KNIGHT Heating Boilers for residential applications as well as KNIGHT XL Commercial Heating Boilers.

Noctua, Inc.    Mountain View, CA 94043
Nov 18, 2011 Combining 11 stator guide vanes with 7-blade impeller and SSO bearings, NF-F12 120 mm Focused Flow(TM) Fan uses custom-designed PWM IC with Smooth Commutation Drive technology for fully automatic control with quiet operation. Stator guide vanes are set out in varying angular distance and feature vortex-control notches to help spread noise emission over broad frequency spectrum. Adding turbulence to influx, stepped inlet design facilitates transition from laminar flow to turbulent flow.

Tecogen Inc.    Waltham, MA 02451
Nov 18, 2011 Suited for commercial and industrial sites, High Efficiency Water Heater extracts energy from atmosphere and pumps heat to useful temperatures. Free waste heat from engine is captured and repurposed. Providing 1.2-1.8 coefficient of performance, heater can produce 400,000-600,000 BTU/hr of hot water. Unit offers alternative to conventional systems at facilities with gas demand of 2,000 therms/month or more, such as hotels, swimming pools, hospitals, health clubs, and universities.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Nov 17, 2011 Available in custom diameters from 12-79 in., ELTA Axial Impellers integrate pressure cast aluminum hubs and adjustable pitch blades made of aluminum or GRP. Modular airfoil blade design provides quiet operation. Available in multiple hub to blade ratios, impellers are suitable for OEM applications or as replacement parts.

powerblanket    Salt Lake City Utah, UT 84104
Nov 11, 2011 In addition to providing heat and preventing freezing on concrete curing projects, Powerblanket® Multi-Duty (MD) heating blankets retain moisture throughout natural hydration process to create wet cure environment that protects against cracking and rapid drying. GreenHeat® Technology uniformly distributes insulated barrier of heat, allowing blanket to thaw frozen ground to 24 in. depth. In tests, concrete under blanket achieves 3,925 psi after 72 hr. Sizes range from 2 x 2 ft to 11 x 23 ft.

Osensa Innovations Corp.    Coquitlam V3J0A3  Canada
Nov 10, 2011 Featuring DIN rail mount design, Model FTX-301 supports 3 fiber optic temperature inputs and includes 3 optically isolated 4-20 mA analog outputs, while Model FTX-302 is same device only without analog outputs. Both include industrial RS-485 serial bus for modbus communication to multiple daisy-chained devices. Providing real-time temperature data to 200°C, each device is configured and monitored via OSENSAView FTX software and direct USB connection to PC/laptop.