Victor Technologies International, Inc
Chesterfield, MO 63017
Share:
Auto-Darkening Welding Helmet features 4 sensors and low-amp performance.
TwecoÃ-® WeldSkillÃ-® helmet can be used in both weld and grind mode and will darken when TIG welding even at 5 A. Solar powered helmet has viewing area of 3.86 x 1.69 in. and weighs 16 oz. When switching from dark-to-light, users can select from three switching speeds: short (0.25-0.35 sec), medium (0.35-0.50 sec) and long (0.50-0.80 sec). Sensitivity and delay knobs are on outside of...
Read More »
New Nickel Flux Cored Wire AWS Classification Provides Industry with Insight on Growing Product Area
St. Louis, MO (July 17, 2007) - The American Welding Society's recent issuance of standards concerning nickel flux cored wires allows fabricators to choose from a variety of welding processes, say officials from Stoody, the leading United States manufacturer of all-position nickel flux cored wires. AWS annually releases a catalog of codes to advise proper procedures and materials for every type...
Read More »Single Lumen Oxygen Conserver covers wide patient range.
By delivering measured pulse of oxygen at beginning of each breath, O2n Demand IV minimizes wasted oxygen and allows for conserving ratios up to 6:1 while optimizing patient oxygenation and oxygen cylinder life. Multiple flow settings - 5 conserving and 3 continuous - make unit suited for range of patients. O2n Demand III dual lumen conserver is also available, suited for patients that require...
Read More »Gas Equipment suits light-medium duty cutting and welding.
Cutskill 250 Series combines all components in toolbox for protection and organization. Torch handles include VanGuard safety features such as built-in flashback arrestors and reverse flow check valves. Regulators have forged brass housing cap and fine threaded adjusting T bar for smooth operation. Cutting attachment includes stainless steel cutting oxygen lever, spiral mixer that blends all fuel...
Read More »
Conversion Kits include MIG welding consumables.
MIG gun front end conversion kits, available for MillerÃ-®, BernardÃ-®, OXOÃ-®, ESABÃ-®, TregaskissÃ-®, and other makes, enable welders with non-Tweco guns to use Genuine Tweco consumable parts. Each kit contains assortment of consumables to complete conversion: 2 diffusers, 3 extended life contact tips, and one heavy duty brass nozzle. Also included, insert card has tip...
Read More »Plasma Cutting Systems utilize 200 A cutting current.
Equipped with XT(TM)-301 precision torch technology, Auto-Cut 200 and Auto-Cut 200 O2 are designed for cutting materials of 1 in. or less. While Auto-Cut 200 is optimized for air plasma cutting of mild steel, Auto-Cut 200 O2 is equipped with gas control box that gives it added efficiency for cutting with oxygen plasma. Both are suitable for stainless steel and aluminum when used in conjunction...
Read More »Electronic Inverters ensure welding safety.
Featuring microprocessor technology, 3.1 Electronic Inverters include Voltage Reduction Device, which reduces maximum open circuit voltage across output terminals of welder to safe voltage of about 12 V. Device turns on welding power when resistance between electrode and work is less than 200 W, ensuring welding safety.
Read More »Cutting and Welding Kit suits heavy-duty applications.
With cutting capacities from Ã-¾-6 in. and welding capacities from 1/8-2 in., VictorÃ-® ContenderÃ-® outfit includes heavy-duty 315FC torch handle with CA2460 cutting attachment and W welding nozzle (size 2). Heavy-duty SR350 series regulators with colored gages are also included, as are two 1-1-101 cutting tips. Along with self-reseating relief valve that provides regulator...
Read More »Portable Cutting/Welding Tote combines safety and mobility.
Featuring in-line, balanced carrying case, VictorÃ-® Portable Totes are professionally equipped to perform critical HVAC and commercial job cutting and welding tasks. Medium-duty 100FC torch handle with CA1350 cutting attachment and W-1 welding nozzle (size 0) provide cutting ability to Ã-½ in., 4 in. with accessories, and welding ability to Ã-¼ in., 1Ã-¼ in. with accessories....
Read More »
Plasma Cutting Systems cut electrically conductive metals.
Suited for applications ranging from light gauge sheet metal to Ã-¾ in. plate, A-Series includes Model FP-20A with 20 A operation at 115 Vac and 25 A at 230 Vac, Model FP-35A with 15-35 A operation at 230 V, and Model FP-70A operating from 25-75 A at 230 V. Units are equipped with 1 TorchÃ-® featuring SureLokÃ-® head, ergonomic handle, and flexible lead. Applications range from...
Read More »
Auto-Darkening Welding Helmet features 4 sensors and low-amp performance.
TwecoÃ-® WeldSkillÃ-® helmet can be used in both weld and grind mode and will darken when TIG welding even at 5 A. Solar powered helmet has viewing area of 3.86 x 1.69 in. and weighs 16 oz. When switching from dark-to-light, users can select from three switching speeds: short (0.25-0.35 sec), medium (0.35-0.50 sec) and long (0.50-0.80 sec). Sensitivity and delay knobs are on outside of...
Read More »Stoody-® Celebrates 90 Years of Hardfacing Tradition and Leadership
St. Louis, Mo. (March 16, 2011) - Ninety years ago, no one had even heard of the concept. But, in a small shop in Whittier, CA, two brothers were experimenting with a new weld overlay process. The result was StoodyÃ-® Rod, and hardfacing history began. In 1921, brothers Winston F. and Shelley M. Stoody opened up the Stoody Welding Co. to service the growing farm implement and tractor repair...
Read More »Thermadyne-® Names Ravi Menon General Manager of Stoody
St. Louis, MO (February 7, 2011) -ThermadyneÃ-® Industries, Inc., a global manufacturer and marketer of metal cutting and welding products, has announced the appointment of Ravi Menon as General Manager of StoodyÃ-®. A Thermadyne brand whose operations are based in Bowling Green, KY, Stoody is a leader in hardfacing technology and high alloy filler metals used to combat various types of...
Read More »Thermadyne Welcomes New National Accounts Manager
Matthew Proffit joins Thermadyne marketing and sales force St. Louis, Mo. (January 5, 2011) - ThermadyneÃ-® Industries, Inc., a global manufacturer and marketer of metal cutting and welding products, has announced the appointment of Matthew Proffit as National Accounts Manager. In this position, Proffit is responsible for the strategic management of existing customer relationships throughout...
Read More »Thermadyne Holdings Corporation to Present at Oppenheimer 4th Annual Industrials Conference on November 18, 2009
ST. LOUIS, MO - October 15, 2009 - Thermadyne Holdings Corporation (NASDAQ: THMD) will be presenting at the Oppenheimer 4th Annual Industrials Conference on Wednesday, November 18, 2009 at 8:00 am ET at The Millennium Broadway Hotel in New York. Presentation materials will be posted to the Company's web site prior to the conference at www.thermadyne.com. About Thermadyne Thermadyne, headquartered...
Read More »Thermadyne Holdings Corporation to Present at Imperial Capital's 3rd Annual GlobeL Opportunities Conference on November 5, 2009
ST. LOUIS, MO - October 13, 2009 - Thermadyne Holdings Corporation (NASDAQ: THMD) will be presenting at Imperial Capital's 3rd Annual Global Opportunities Conference on Thursday, November 5, 2009 at 10:55 am ET at The New York Palace Hotel in New York. Presentation materials will be posted to the Company's web site prior to the conference at www.thermadyne.com. About Thermadyne Thermadyne,...
Read More »Thermadyne Honors Distributor Cee Kay Supply
St. Louis, Mo. - - Thermadyne Industries, Inc., a global leader in cutting and welding products that is known for its respected brands including Victor, Thermal Dynamics, Tweco, Arcair, Thermal Arc, Stoody and TurboTorch, recently honored Cee Kay Supply, one of its leading distributors, on Cee Kay's 60th anniversary. Cee Kay is the largest, independent supplier of industrial gases, welding and...
Read More »Thermadyne Appoints Three to Automation Business Manager Positions
St. Louis, Mo. (March 31, 2008)- Thermadyne Industries, Inc., a global leader in cutting and welding products, is pleased to announce the appointments of Charlie Fischer, Mark Powers and Barry McCarter to the position of Automation Business Manager. Charlie Fischer resides in Beverly Hills, Mich., and will be responsible for covering the states of Michigan, Indiana, Ohio and Kentucky. Fischer has...
Read More »Victor-® Appoints Randy Niederer as Marketing Manager for Americas Gas Equipment
St. Louis, MO (October 22, 2007) - VictorÃ-®, the world leader in gas apparatus and pressure control products, has announced the appointment of Randy Niederer as Marketing Manager for Americas Gas Equipment. Niederer brings 13 years of sales and marketing experience to his new position, most recently having served as Director of Strategic Marketing for LaserBand. Niederer received Bachelor of...
Read More »Kent Swart Joins Thermal Dynamics as Market Manager
St. Louis, MO (September 12, 2007) - Thermal Dynamics, the leading producer of manual and automated plasma cutting systems, has announced the hiring of Kent Swart as Market Manager, Americas- Plasma. Swart will manage the plasma cutting marketing through all distribution channels, including promotions & incentives, channel profitability and merchandizing. Kent worked for 12 years for Diagraph, an...
Read More »