Company News

TE Connectivity

1050 Westlakes Drive, Berwyn, PA, 19312, USA

  • 610-893-9800

Latest New Product News from
TE Connectivity

Faston Receptacle Terminals meet UL 310 and CSA C22.2 No. 153 standards.

January 11, 2017

Designed to mate with .250 x .031 in. tabs with retention holes, 250 Series Faston Receptacle Terminals feature F- crimp design and measures 0.6 in. long. Accommodating 22 - 18 AWG wires with 0.094 - 0.11 in. diameter insulation, units when applied to 18 AWG wire can carry 7 and 14 amps continuously and intermittently. Having 22.2 N and 17.8 N force for first and sixth extraction and 35.6 N... Read More

Electrical Equipment & Systems

Single Wall Halogen-free Heat Shrink Tubing Products meets UL VW-1 flammability test.

October 21, 2016

Suitable for confined-space applications requiring air quality, Single Wall Heat Shrink Tubing products come in X2 and X4 versions. Products shrink at a 2:1 ratio and install quickly at full-recovery temperature of 90 degree C. Used in operating temperatures from -30 C to 125 C. X2 products are offered in 1.0 to 30 mm in 17 sizes. X4 products come in 0.8 to 25 mm range in 13 sizes. Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Heavy-Duty Backshells withstand harsh environments.

October 12, 2016

Designed for agricultural, truck/bus, construction, mining, marine, and 2-wheel industries, AMPSEAL 16 backshells provide strain relief and environmental protection while enhancing aesthetics for AMPSEAL 16 connectors. Construction is of thermoplastic, and snap-on design facilitates installation. Available in 180° and 90° versions for all AMPSEAL 16 plug and cap arrangements, backshells... Read More

Electrical Equipment & Systems

DEUTSCH Connection Splices have field serviceable design.

August 15, 2016

Withstanding construction, mining, marine, and agriculture industry conditions, DEUTSCH Jiffy Splices provide field-serviceable alternative to permanent splices. Design facilitates installation and accelerates repair of damaged electrical connections. Protecting connections from dirt, dust, and water immersion (3 ft max), products are made from silicone elastomer. Bodies house contact... Read More

Automatic ID, Computer Hardware & Peripherals

Rugged Smart Card Reader enhances road safety.

July 27, 2016

To help prevent fatigue-related accidents, models 1955562-1 and -2 each work with digital tachograph to track number of hours driven by commercial vehicle operator. Tamperproof, shock- and vibration-resistant unit interconnects with smart card according to ISO 7810 and 7816 standards and features 112.2 x 61.5 x 6.05 mm, heavy-duty thermoplastic body with UL 94 V0 flammability rating.... Read More

Electronic Components & Devices, Test & Measuring Instruments

Signal Conditioner measures voltage difference over sum.

June 3, 2016

Able to measure secondary voltage difference over sum (Va-Vb)/(Va+Vb), LVC-4500 Ratiometric Signal Conditioner supports ratiometric AC LVDTs and RVDTS with constant sum of secondary voltages. Standalone unit is suited for use with LVDTS in extreme conditions that have high temperature variations and require cable runs in excess of 100 ft. LVC-4500 provides voltage, current, and digital RS-485... Read More

Sensors Monitors & Transducers

LVDT Position Sensors are CSA listed for hazardous locations.

April 7, 2016

Constructed entirely of stainless steel with hermetically sealed sensor body and through-bore design, HLIR 750 Series provides contact-less position measurement for critical applications in gas turbines for fuel valve position feedback, vane pitch servo controls, and governor controls. Intrinsically safe units offer 4–20 mA output signal and are available in measuring ranges from ±2 to... Read More

Sensors Monitors & Transducers

LVDT Position Transmitter features CANopen interface.

February 2, 2016

Equipped with CANopen interface compliant to CiA 443 for subsea instruments, Macro Sensors SSBR-937 Series can withstand deep sea environments with external pressures up to 5,000 psi and more than 1 million hours MTBF, when encased in special alloys. Sensor offers optimized repeatability, with error less than 0.01% of full range. Device is suited for elongation measurement as part of long-term... Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors Monitors & Transducers, Test & Measuring Instruments

Submersible LVDT Position Transmitter serves subsea applications.

December 30, 2015

Featuring CANopen interface that complies with CiA 443 for subsea instruments, Macro Sensors SSIR 937 offers interoperable and standardized communications to network with devices from different manufacturers used on ocean floor. Transmitter withstands external pressures to 7,500 psi with MTBF of >1 million hr when encased in special alloys, and repeatability, with error of <0.01% of full... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Hybrid Lever Connectors withstand harsh environments.

November 23, 2015

Featuring heavy-duty, environmentally sealed design, AMPSEAL 16 Connectors stand up to harsh conditions of agricultural, construction, trucking, marine, and off-highway industries. Units are 28-position connectors that feature mix of 24 size 16 contacts and 4 size 12 contacts. Connectors incorporate lever slide mechanism for mating and use mounting clips for quick, tool-less mounting. To help... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Transparent Connector integrates LED for troubleshooting.

November 4, 2015

DEUTSCH DT Detector connector provides visual confirmation of power by producing glow via integrated 12 or 24 V LED to facilitate troubleshooting in areas with difficult connector visibility/accessibility. Two-way plug has transparent housing and yellow or red wedgelock. Respectively available with and without end caps, DT06-2S-SDT-CE27 and -CE28 accept size 16 DEUTSCH... Read More

Chemicals & Chemical Processing, Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Dual Wall Heat Shrink Tubing meets UL VW-1 test requirement.

September 29, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR (dual wall, fire-retardant) heat shrink tubing comes in 14 sizes from 3–52 mm ID and is applicable to range of electrical connections and terminations. Flame-retardant polyolefin jacket and thermoplastic inner adhesive wall provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to... Read More

Chemicals & Chemical Processing, Electrical Equipment & Systems

Dual Wall Heat Shrink Tubing meets flammability requirements.

September 24, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR Heat Shrink Tubing features flame retardant polyolefin jacket and thermoplastic inner adhesive wall that provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to create moisture-resistant seal. Available in 14 sizes from 3–52 mm ID, tubing offers heat shrink ratios of 3:1 or 4:1.... Read More

Optics & Photonics

Fiber Distribution Panel boosts datacenter/office speed, efficacy.

July 29, 2015

QRapid incorporates Quareo physical layer management technology comprising connection point identification (CPID) for real-time visibility to network add-ons, moves, and changes. Used in central office fiber deployments, this 1 RU, 48-port or 3 RU, 144-port, rack-mountable panel features RapidReel fiber cable spool and electronics. Functionality enables user to know, in real-time, whether each... Read More

Electronic Components & Devices

Connector Series includes wire-to-board headers.

April 16, 2015

Rated to 20 A, wire-to-board Power Triple Lock 6.0 mm center line connectors operate up to 150°C, are V-0 rated (UL 94 V-0), and come in single-row (2, 3, 4, 5) configurations. Optional CPA (Connector Position Assurance) device helps keep connector fully mated and engaged during shipment/installation/use, while optional TPA (Terminal Position Assurance) device provides secondary locking of... Read More

Computer Hardware & Peripherals, Software

PHY Management Products support high-density applications.

April 3, 2015

Combining hardware and software elements with connection point identification technology, Quareo Physical Layer Management System provides state of physical network at all times. NG4access optical distribution frame, featuring Quareo technology (QNG4), offers access to high-density fiber terminations up to 3,456 fibers/frame. High-density 1RU fiber optical panel, featuring Quareo technology... Read More

Sensors Monitors & Transducers, Thermal & Heating Equipment

Resettable Thermal Cutoffs protect lithium batteries.

March 25, 2015

Housed in 5.8 x 3.85 x 1.15 mm package with 9 Vdc rating, Series MHP-TAM provides resettable over-temperature protection to shut down battery when fault is detected, making devices suited for ultra-thin notebooks and other portable consumer electronics. Utilizing metal hybrid PPTC technology, TCOs combine bimetal protector in parallel with polymeric positive temperature coefficient device. Series... Read More

Electronic Components & Devices, Green & Clean, Materials & Material Processing

PPTC/Zener Diode Devices protect consumer electronics.

November 5, 2014

Combining Zener diode and resettable PolySwitch PPTC device in 4.0 x 5.0 x 1.2 mm package, PolyZen ZEN056V230A16YC and ZEN056V260A16YC simultaneously protect against damage from overload, overcurrent, reverse-bias, ESD, and overtemperature events. Hybrid units offer up to 2.6 A hold-current at room temperature, ±30 kV ESD protection, and 8/20 µs pulse = 150 A overvoltage protection to help... Read More

Materials & Material Processing

Silicon ESD Devices offer 20 kV air discharge rating.

March 28, 2014

Exhibiting ±20 kV and ±22 kV air discharge ratings, SESD Series helps designers solve pervasive protection challenge caused by charged board events. Products come in uni-directional and bi-directional configurations with input capacitance of 0.30 and 0.15 pF, respectively. Clamping voltage of less than 15 V helps facilitate fast turn-on time and minimize energy let-through to sensitive... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

Data Converters drive 100G, 300G, and 400G active optics.

February 28, 2014

Using 25G VCSEL and PIN devices, TIA amplifier, and driver IC, Coolbit optical engines convert data from electrical signals to optical signals and drive technology behind TE 100G, 300G, and 400G active optics. Platform engines help communication systems conserve power, and QSFP28 modules perform at <1.5 W per transceiver. Optical engines enhance performance while satisfying high density and high... Read More

Other Company News from
TE Connectivity

May 26, 2010

x x.

April 20, 2010

x x