Sternvent
Union, NJ 07083
Dust Collectors provide high velocity operation.
Featuring long taper cone, Cyclone Dust Collectors are available from 2-75 hp for airflows of 1,000-14,000 cfm with 55-gal drums, hoppers, and rotary airlocks as dust storage choices. Units are suited for capturing nuisance particulate resulting from cutting, planing, shaping, routing, grinding, and polishing. Options include top or ground mounted fan, discharge silencer, after filters, motor ice...
Read More »
Dust Collector cleans in-plant air.
Vibraclean Dust Collector is available from 1,200-8,000 cfm with 3-30 hp. Dirty air enters baffled inlet, while top mounted, direct drive, backward inclined fan provides suction. Eccentric driven motorized shaker rejuvenates filters allowing dust collector to be installed outdoors. Designed to filter fine wood, metal, chemical, and pharmaceutical dust and/or provide equipment room ventilation for...
Read More »
Twin Dust Collector provides continuous duty operation.
Twin SternPulse(TM) Model SPV1225 features 12 polyester blend filter cartridges; 25 hp top-mounted, direct drive, backward inclined fan; and 95% final filters that permit air to be recirculated back to building. Combined units handle total of 10,000 cfm. Automatic filter cleaning is controlled by remote solid-state cyclic timer. Since only a few filters are cleaned at a time, remaining filters...
Read More »
Dust Collectors provide continous material discharge.
Dust collectors offer motorized rotary airlock that provides airtight seal at bottom of cyclone and continuous discharge of particulate separated from air stream. Available in 8-14 in. dia sizes, units are powered by 2 hp motor and are offered in either cast iron or welded steel construction. Remote motor controller includes pilot lights and delay timer. Cyclones are available with flow rates of...
Read More »
Dust Collector provides quiet operation.
Model DG203 shaker style unit features 3 hp direct drive built-in fan that delivers 1200 cfm at 5 in. SP. Dirty air enters top-mounted inlet, passes through inlet zone and makes 180 deg turn to reach 20 individual polyester, envelope-shaped filters. Dust can be collected in either pullout dust drawer or in 55 gal drum. Excessive dust on filters is easily dislodged by shaking filter with exterior...
Read More »
Dust Collector suits low headroom applications.
DKPB series Vibraclean low profile dust collector captures and filters fine dust and chips from sanding or cutting wood or similar materials. Shaker style dust collector includes factory-wired motorized shaker that is automatically activated upon shutdown of blower. Features include direct-drive blower, capacities from 2400 to 5400 cfm, and 5 to 15 hp motors. Multi-pocket filter modules capture...
Read More »
Dust Collector suits low headroom installations.
Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.
Read More »
Dust Collectors provide high velocity operation.
Featuring long taper cone, Cyclone Dust Collectors are available from 2-75 hp for airflows of 1,000-14,000 cfm with 55-gal drums, hoppers, and rotary airlocks as dust storage choices. Units are suited for capturing nuisance particulate resulting from cutting, planing, shaping, routing, grinding, and polishing. Options include top or ground mounted fan, discharge silencer, after filters, motor ice...
Read More »
Dust Collector cleans in-plant air.
Vibraclean Dust Collector is available from 1,200-8,000 cfm with 3-30 hp. Dirty air enters baffled inlet, while top mounted, direct drive, backward inclined fan provides suction. Eccentric driven motorized shaker rejuvenates filters allowing dust collector to be installed outdoors. Designed to filter fine wood, metal, chemical, and pharmaceutical dust and/or provide equipment room ventilation for...
Read More »
Twin Dust Collector provides continuous duty operation.
Twin SternPulse(TM) Model SPV1225 features 12 polyester blend filter cartridges; 25 hp top-mounted, direct drive, backward inclined fan; and 95% final filters that permit air to be recirculated back to building. Combined units handle total of 10,000 cfm. Automatic filter cleaning is controlled by remote solid-state cyclic timer. Since only a few filters are cleaned at a time, remaining filters...
Read More »
Dust Collectors provide continous material discharge.
Dust collectors offer motorized rotary airlock that provides airtight seal at bottom of cyclone and continuous discharge of particulate separated from air stream. Available in 8-14 in. dia sizes, units are powered by 2 hp motor and are offered in either cast iron or welded steel construction. Remote motor controller includes pilot lights and delay timer. Cyclones are available with flow rates of...
Read More »
Dust Collector provides quiet operation.
Model DG203 shaker style unit features 3 hp direct drive built-in fan that delivers 1200 cfm at 5 in. SP. Dirty air enters top-mounted inlet, passes through inlet zone and makes 180 deg turn to reach 20 individual polyester, envelope-shaped filters. Dust can be collected in either pullout dust drawer or in 55 gal drum. Excessive dust on filters is easily dislodged by shaking filter with exterior...
Read More »
Dust Collector suits low headroom applications.
DKPB series Vibraclean low profile dust collector captures and filters fine dust and chips from sanding or cutting wood or similar materials. Shaker style dust collector includes factory-wired motorized shaker that is automatically activated upon shutdown of blower. Features include direct-drive blower, capacities from 2400 to 5400 cfm, and 5 to 15 hp motors. Multi-pocket filter modules capture...
Read More »
Dust Collector suits low headroom installations.
Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.
Read More »