Mack Automation, LLC
Unit 1
Flagstaff, AZ 86004
Grippers serve as robot hands in automated motion devices.
Grippers, offered in 2- and 3-finger variations, simulate motion of human hands in parts handling applications. Mounted to any motion device or used as hands on robots, products operate on plant air and feature double acting drive motion for gripping parts externally or internally. Inlet pressure may be reduced to handle fragile parts. Fingers can be fabricated to conform to special shapes, and...
Read More »
Air Cylinders may be modified to user requirements.
Miniature Air Cylinders operate on plant air using standard valve circuits with wide choice of mounting and porting options in various materials. Cylinders are suited for production tooling, automated processes, and general-purpose industrial applications. Basic design is to US Customary specifications, but all products are offered in metric versions.
Read More »
Micro Grippers suit automation applications.
Delivering pick and place service, grippers feature blank fingers that are profiled to fit small parts. Finger sets can be exchanged without disturbing mounting setup, close with spring force, and open with plant air using valves on 3-way control circuits. Products are offered in 5 micro sizes, in 3 basic configurations, and in 4 mounting styles with choice of aluminum alloy or stainless steel...
Read More »
Air Cylinders suit space limited applications.
Unconventional Air Cylinders are offered with short strokes in sizes from 1-6 in. diameter, in all basic cylinder configurations including double-ended pistons. Fluid transfer is through O-ring seals on cylinder mounting face. Flow passages can be built into user's structure at any location where all plumbing connections are outside work zone. Design helps avoid accidental damage to supply lines...
Read More »
Motion Transfer Units have adjustable end of travel stop.
Low-profile, air-actuated motion transfer units employ pistons that are keyed internally against rotation and incorporate adjustable stop mechanism for end of stroke positioning. Basic modules operate through 4-way air valves for manual control near work station or through solenoid operated valves from remote location. Units operate in any position with motion range to 12 in. End effectors with...
Read More »
Grease Gun Rams offer outputs from 6,000 to 10,000 psi.
Miniature rams, suited for use with standard grease guns as source of pressure, offer ratings from Ã-½-4 tons and strokes of 1 in. Products may serve as solution for occasional applications requiring large linear force in small, portable package. Grease used in typical application may be recycled and reused for environmental and economic purposes by using recovery valve.
Read More »
Air Cylinders suit automation applications.
Low Profile Air Cylinders have heavy walls and threaded end caps for easy repair and seal replacement. Forty eight configurations are available in 16 mounting styles with 4 bore sizes and choice of stroke to 12 in. Units feature precision machined components, internal lube cavities, oil impregnated rod bearings, density enhanced cylinder bores, and internal shock absorbers. Port relationship is...
Read More »
Thin Disc Grippers do not mar disc face.
Available in 2- and 3-finger configurations, thin disc grippers grasp discs on outside diameter or inside hole to avoid contact with critical surfaces. Operated on plant air, pinch force can be reduced with pressure regulation to handle fragile parts made from glass or plastic. Drive mechanism offers contoured fingers to fit work pieces.
Read More »
Rotary Indexer works without servos.
Indexer provides angular rotation in small increments in either direction. It can be used in two operating modes. One mode is operation as small bench top turn table; other mode is providing rotary motion when mounted to independent motion device or robot arm. Plant air is used with simple on/off digital programming using solenoid operated four way valves and standard controllers.
Read More »
Hydraulic Actuators have threaded body mounting.
Miniature short stroke, hydraulic actuators suit installations where space is limited on jigs, fixtures, molds, general purpose tooling, and O.E.M. applications. Fluid lines and fittings are located at rear and are isolated from work area. Force output is rated from 1 to 3 tons in 5 models rated at 3,000 psi. Design offers leak-proof SAE ports and polyurethane lip seals on fine...
Read More »
Grippers serve as robot hands in automated motion devices.
Grippers, offered in 2- and 3-finger variations, simulate motion of human hands in parts handling applications. Mounted to any motion device or used as hands on robots, products operate on plant air and feature double acting drive motion for gripping parts externally or internally. Inlet pressure may be reduced to handle fragile parts. Fingers can be fabricated to conform to special shapes, and...
Read More »
Air Cylinders may be modified to user requirements.
Miniature Air Cylinders operate on plant air using standard valve circuits with wide choice of mounting and porting options in various materials. Cylinders are suited for production tooling, automated processes, and general-purpose industrial applications. Basic design is to US Customary specifications, but all products are offered in metric versions.
Read More »
Micro Grippers suit automation applications.
Delivering pick and place service, grippers feature blank fingers that are profiled to fit small parts. Finger sets can be exchanged without disturbing mounting setup, close with spring force, and open with plant air using valves on 3-way control circuits. Products are offered in 5 micro sizes, in 3 basic configurations, and in 4 mounting styles with choice of aluminum alloy or stainless steel...
Read More »
Air Cylinders suit space limited applications.
Unconventional Air Cylinders are offered with short strokes in sizes from 1-6 in. diameter, in all basic cylinder configurations including double-ended pistons. Fluid transfer is through O-ring seals on cylinder mounting face. Flow passages can be built into user's structure at any location where all plumbing connections are outside work zone. Design helps avoid accidental damage to supply lines...
Read More »
Motion Transfer Units have adjustable end of travel stop.
Low-profile, air-actuated motion transfer units employ pistons that are keyed internally against rotation and incorporate adjustable stop mechanism for end of stroke positioning. Basic modules operate through 4-way air valves for manual control near work station or through solenoid operated valves from remote location. Units operate in any position with motion range to 12 in. End effectors with...
Read More »
Grease Gun Rams offer outputs from 6,000 to 10,000 psi.
Miniature rams, suited for use with standard grease guns as source of pressure, offer ratings from Ã-½-4 tons and strokes of 1 in. Products may serve as solution for occasional applications requiring large linear force in small, portable package. Grease used in typical application may be recycled and reused for environmental and economic purposes by using recovery valve.
Read More »
Air Cylinders suit automation applications.
Low Profile Air Cylinders have heavy walls and threaded end caps for easy repair and seal replacement. Forty eight configurations are available in 16 mounting styles with 4 bore sizes and choice of stroke to 12 in. Units feature precision machined components, internal lube cavities, oil impregnated rod bearings, density enhanced cylinder bores, and internal shock absorbers. Port relationship is...
Read More »
Thin Disc Grippers do not mar disc face.
Available in 2- and 3-finger configurations, thin disc grippers grasp discs on outside diameter or inside hole to avoid contact with critical surfaces. Operated on plant air, pinch force can be reduced with pressure regulation to handle fragile parts made from glass or plastic. Drive mechanism offers contoured fingers to fit work pieces.
Read More »
Rotary Indexer works without servos.
Indexer provides angular rotation in small increments in either direction. It can be used in two operating modes. One mode is operation as small bench top turn table; other mode is providing rotary motion when mounted to independent motion device or robot arm. Plant air is used with simple on/off digital programming using solenoid operated four way valves and standard controllers.
Read More »
Hydraulic Actuators have threaded body mounting.
Miniature short stroke, hydraulic actuators suit installations where space is limited on jigs, fixtures, molds, general purpose tooling, and O.E.M. applications. Fluid lines and fittings are located at rear and are isolated from work area. Force output is rated from 1 to 3 tons in 5 models rated at 3,000 psi. Design offers leak-proof SAE ports and polyurethane lip seals on fine...
Read More »