Imperial Electric, A Kinetek Co.
Akron, OH 44306
Gearless AC Elevator Motor is ideal for MRL applications.
Offering max lift capacity of 4,000 lb at 500 fpm with 2:1 roping, Model 478 is suited for high-passenger traffic areas in low-rise buildings. Motor, sheaves, and brake assemblies, integrated into one compact unit, reduce dimensional requirements. Capacity will accommodate larger car size, capable of transporting disabled patient, medical personnel, and life support equipment without...
Read More »
DC Permanent Magnet Motors measure 2.5-4.4 in. in diameter.
Motors, designed for continuous or intermittent duty, are rated from 12-240 V, offer .115-2.5 hp, and operate at speeds from 900-4,500 rpm. Measuring 2.5-4.4 in. in diameter, motors range from 4-7.5 in. long and can be painted or plated depending on application. Applications include floor-care, off-road winches, pumps, gearmotors, transaxles, and stationary vibration systems.
Read More »
Scaffold Hoist hoists heavy objects onto scaffold.
ALPHA 440P delivers material to upper stages and mounts hoist to scaffolding. Main unit stays on ground, while pulley support is mounted to scaffold leg. Continuous duty hoist unit is held to ground by ballast weights, and workers have 80 ft of control cable to remove themselves from beneath load. Lifting capacity is 440 lb, and wire rope length is 260 ft. All metal hoist offers...
Read More »Brushless Motors suit motion control applications.
Series 06 synchronous, permanent magnet motors offer torque range of 63.7 to 3186 oz-in. with peak torque from 283 to 14161 oz-in. Nominal speed range is 500 to 3,000 rpm. All motors are 6-pole with magnets made from neodymium/iron/boron alloys. Stator windings are 3-phase star connections. Flange-mount motors are totally enclosed (IP44) and feature heat-treated, square aluminum alloy housings,...
Read More »
Gear Reducer works in limited space.
Series P42GP Frame Parallel Shaft Gear Reducer is suitable for light-duty applications, such as commercial floor care, lawn care, and other general-purpose products where space is limited. Made of aluminum alloy, series offers fan-cooled or TENV permanent-magnet dc motors from 12 to 48 V, operating at 180 to 360 rpm, with up to 1/2 hp rating. Offset gear reducer assembly has 10:1 gear ratio. Unit...
Read More »
Electric Pumps provide heavy-duty liquid movement.
FiR AC electric pumps are designed for commercial dishwashers, laundromats, and waste separation machines. Centrifugal pump housings and impellers are offered in polypropylene, BMC, and IEXF. Seals are available in NBR, TeflonÃ-®, or EPDM. Pump sections are mounted to asynchronous single or 3-phase induction motors designed for 50 or 60 Hz operation. Horsepower ranges from .10 to 3.6, and...
Read More »
Transaxle features wound field motor.
Model T523 DC Motor Transaxle incorporates cut steel helical gearing and splined interface between motor and transaxle. Axle shafts include oil seals that resist penetration of dirt. Transaxle features ball bearing construction, all aluminum housing, and neoprene mounting sleeves. Motors range from 12 through 48 Vdc and produce up to 2 hp. Gear ratios of 8.2:1, 11.1:1, 15.9:1, 23.2:1, and 29.4:1...
Read More »
AC Motor operates in severe environments.
Totally enclosed ac permanent split capacitor motor features clamshell housing, liquid-tight connectors, cast aluminum capacitor cover, heavy duty ball bearings, and steel shafts. Face-mount unit is available in power ratings of 1/4, 1/3, and 1/2 hp at 115 or 230 V in 50 or 60 cycle ac. Two-pole electrical design provides electrical current for both clockwise and counterclockwise directions at...
Read More »
Offset Gearmotors work in floor care products.
Low profile, parallel offset Series P56GP gearbox is mounted to 6 in. dia 1/2 hp dc motor and extends less than 8 in. from motor faceplate. Combination is suited to variety of brush-driven, commercial floor care products where space is limited, and can be adapted to other equipment such as power hose reels. Units have options of 12, 24, 36 and 48 V. They feature hardened gears, ball bearing...
Read More »
Gearmotors suit side-broom motors in floor care machines.
Right-angle MC 143 series gearmotor units offer sealed gearbox assemblies. Construction includes aluminum die-cast housings; all ball bearing design; metallic gearing with hardened, ground-steel worm; and forged-bronze gears. Units are available with 12-48 Vdc permanent-magnet motors, which deliver up to 800 in-lbs of intermittent torque. Applications include recreational vehicles with slide-out...
Read More »
Gearless AC Elevator Motor is ideal for MRL applications.
Offering max lift capacity of 4,000 lb at 500 fpm with 2:1 roping, Model 478 is suited for high-passenger traffic areas in low-rise buildings. Motor, sheaves, and brake assemblies, integrated into one compact unit, reduce dimensional requirements. Capacity will accommodate larger car size, capable of transporting disabled patient, medical personnel, and life support equipment without...
Read More »
DC Permanent Magnet Motors measure 2.5-4.4 in. in diameter.
Motors, designed for continuous or intermittent duty, are rated from 12-240 V, offer .115-2.5 hp, and operate at speeds from 900-4,500 rpm. Measuring 2.5-4.4 in. in diameter, motors range from 4-7.5 in. long and can be painted or plated depending on application. Applications include floor-care, off-road winches, pumps, gearmotors, transaxles, and stationary vibration systems.
Read More »
Scaffold Hoist hoists heavy objects onto scaffold.
ALPHA 440P delivers material to upper stages and mounts hoist to scaffolding. Main unit stays on ground, while pulley support is mounted to scaffold leg. Continuous duty hoist unit is held to ground by ballast weights, and workers have 80 ft of control cable to remove themselves from beneath load. Lifting capacity is 440 lb, and wire rope length is 260 ft. All metal hoist offers...
Read More »Brushless Motors suit motion control applications.
Series 06 synchronous, permanent magnet motors offer torque range of 63.7 to 3186 oz-in. with peak torque from 283 to 14161 oz-in. Nominal speed range is 500 to 3,000 rpm. All motors are 6-pole with magnets made from neodymium/iron/boron alloys. Stator windings are 3-phase star connections. Flange-mount motors are totally enclosed (IP44) and feature heat-treated, square aluminum alloy housings,...
Read More »
Gear Reducer works in limited space.
Series P42GP Frame Parallel Shaft Gear Reducer is suitable for light-duty applications, such as commercial floor care, lawn care, and other general-purpose products where space is limited. Made of aluminum alloy, series offers fan-cooled or TENV permanent-magnet dc motors from 12 to 48 V, operating at 180 to 360 rpm, with up to 1/2 hp rating. Offset gear reducer assembly has 10:1 gear ratio. Unit...
Read More »
Electric Pumps provide heavy-duty liquid movement.
FiR AC electric pumps are designed for commercial dishwashers, laundromats, and waste separation machines. Centrifugal pump housings and impellers are offered in polypropylene, BMC, and IEXF. Seals are available in NBR, TeflonÃ-®, or EPDM. Pump sections are mounted to asynchronous single or 3-phase induction motors designed for 50 or 60 Hz operation. Horsepower ranges from .10 to 3.6, and...
Read More »
Transaxle features wound field motor.
Model T523 DC Motor Transaxle incorporates cut steel helical gearing and splined interface between motor and transaxle. Axle shafts include oil seals that resist penetration of dirt. Transaxle features ball bearing construction, all aluminum housing, and neoprene mounting sleeves. Motors range from 12 through 48 Vdc and produce up to 2 hp. Gear ratios of 8.2:1, 11.1:1, 15.9:1, 23.2:1, and 29.4:1...
Read More »
AC Motor operates in severe environments.
Totally enclosed ac permanent split capacitor motor features clamshell housing, liquid-tight connectors, cast aluminum capacitor cover, heavy duty ball bearings, and steel shafts. Face-mount unit is available in power ratings of 1/4, 1/3, and 1/2 hp at 115 or 230 V in 50 or 60 cycle ac. Two-pole electrical design provides electrical current for both clockwise and counterclockwise directions at...
Read More »
Offset Gearmotors work in floor care products.
Low profile, parallel offset Series P56GP gearbox is mounted to 6 in. dia 1/2 hp dc motor and extends less than 8 in. from motor faceplate. Combination is suited to variety of brush-driven, commercial floor care products where space is limited, and can be adapted to other equipment such as power hose reels. Units have options of 12, 24, 36 and 48 V. They feature hardened gears, ball bearing...
Read More »
Gearmotors suit side-broom motors in floor care machines.
Right-angle MC 143 series gearmotor units offer sealed gearbox assemblies. Construction includes aluminum die-cast housings; all ball bearing design; metallic gearing with hardened, ground-steel worm; and forged-bronze gears. Units are available with 12-48 Vdc permanent-magnet motors, which deliver up to 800 in-lbs of intermittent torque. Applications include recreational vehicles with slide-out...
Read More »