Company News

Honeywell Fire Systems Group

1 Fire Lite Place, Northford, CT, 06472, USA

  • 203-484-7161

General Information:
Beth Welch
Phone: 203-484-6202
E-mail this person

Latest New Product News from
Honeywell Fire Systems Group

communication systems & equipment, computer hardware & peripherals

Multi-Mode Fiber System unifies multiple fire alarms.

August 12, 2014

Designed to join up to 16 remote fire alarm control panels together to report all systems' signals to central monitoring station, Lite-Connect allows more details to be reported on systems’ events, as opposed to traditional method of running copper signaling line circuits between buildings. Multi-mode fiber optic cable protects control panels from common ground faults and electrical surges caused by lightning. Information reported contains actual point or zone information for all event types. Read More

safety & security equipment

ECC Circuit Board enables remote, real-time mass notification.

May 1, 2014

Remote Telephone Zone Module (RTZM) provides authorized users remote access to send out emergency notifications through facility's Emergency Command Center (ECC) system via any phone. Secure system access, granted via PIN/caller-ID, and menu options ensure facility managers and security officials get emergency information and instructions to building occupants in real-time. Presence of ECC system with RTZM can provide instant alerts to occupants in specific area or throughout building. Read More

communication systems & equipment

Mass Notification System delivers scalability, compatibility.

May 7, 2013

Emergency Command Center (ECC) integrates with fire alarms and other life safety systems, serving as fully supervised system for delivering critical messages. Scalability and configurability permits customization to communication needs of any building. Listed to UL 2572 standard, ECC features interchangeable components and supports up to 8 operator consoles placed throughout building. Sending of emergency communications through system is also supported via landline or cellular phone. Read More

communication systems & equipment, safety & security equipment

Fire Fighter Telephone System supports up to 72 connections.

June 20, 2011

Farenhyt IFP-FFT supports up to 72 telephone connections and allows concurrent use of as many as 10 phones. To facilitate installation, system operates on single loop of standard wire. Fully supervised system, suited for high-rise buildings and large facilities in regions that require fire fighter telephone systems, immediately displays trouble conditions via main panel, which is also utilized to control local and remote handsets. Read More

controls & controllers, safety & security equipment

Addressable Control Panel comes with built-in communicator.

November 1, 2006

Combining capabilities of fire alarm control panel and digital alarm communicator/transmitter, Model MS-9050UD provides complete fire control system for child care, auditoriums, theaters, and restaurants. With capacity of 50 addressable devices, it offers single addressable SLC loop and 2 onboard Notification Appliance Circuits. Additional features include 2 programmable relays, one fixed trouble relay, built-in programmer, and telephone line active LEDs. Read More

communication systems & equipment

IP Communicator is designed for fire alarm panels.

October 16, 2006

Without requiring public IP address, IPDACT transmits information generated by fire alarm control panel to central station via Internet. It uses DHCP client for automatic IP address configuration and can utilize any Ethernet network connection, allowing for alarm transmissions of less than 1 sec to optimize response time. Using Contact ID format, IP communicator offers supervised line functionality and AES 512 bit data encryption. Read More

controls & controllers, safety & security equipment

Fire Alarm Control Panel includes built-in communicator.

July 21, 2006

Combining capabilities of FACP and DACT into one circuit board, addressable Model MS-9200UDLS features LiteSpeed(TM) speed Signaling Line Circuit protocol, which simultaneously polls 10 devices, enabling fully loaded panel to report incident and activate notification circuits in less than 10 sec. Panel also includes LED graphic and LCD annunciators, reverse polarity/city box transmitter, local and remote upload/download software, and remote power expansion. Read More

controls & controllers, safety & security equipment

Addressable Control Panel includes built-in communicator.

February 28, 2006

Combining capabilities of Fire Alarm Control Panel and Digital Alarm Communicator/Transmitter into one circuit board, Model MS-9050UD provides single addressable SLC loop, which meets NFPA Style 4, 6, and 7 requirements. DACT transmits system status to Central Station via public switched telephone network. With capacity of 50 addressable devices, panel includes 2 onboard Notification Appliance Circuits, 2 programmable relays, 1 fixed trouble relay, and built-in programmer. Read More

controls & controllers, safety & security equipment

Fire Alarm Conrol Panel meets UL 9th Edition requirements.

July 21, 2005

Dual-loop, addressable MS-9600LS is equipped with 18 A hr batteries, 8 A switching power supply, and LiteSpeed(TM) Signaling Line Circuit, which simultaneously polls 10 devices looking for new information at specific addresses. In under 10 sec, fully loaded panel of up to 636 devices can report incident and activate notification circuits. Devices can be wired on standard twisted and unshielded wire with distances up to 10,000 ft per loop. Read More


Software automatically performs voltage drop calculations.

May 19, 2005

Lite-Calcs(TM) v2.0 aids in developing voltage drop calculations for fire alarm control panels, Notification Appliance Circuits (NACs), and auxiliary power supplies, informing user if additional NAC power boosters are required. Offering automatic calculation, software includes database for editing, adding, and deleting parts as well as storing job information and contacts. Favorites feature lets users save and access frequently used notification appliances. Read More

communication systems & equipment, safety & security equipment, sensors, monitors & transducers

Communications Protocol offers accurate event reporting.

March 21, 2005

SmartScan is offered on company's IdentiFlex 600 Series fire control panels. It provides alarm verification per detector and is fully digital. Panel end-to-end response is reduced to less than 5 sec, and 198 devices per loop can be supported. Protocol enables loop distances up to 12,000 ft of twisted pair, parallel pair, THHN, and shielded wire types. One loop poll covers 10 devices. Read More

retail & sales equipment, test & measuring instruments

Audio Evacuation Systems include manual paging feature.

January 21, 2005

Emergency communications systems include ACC-25/50DA audio panel, which produces over 1,500 W of digital audio power, and ACC-25/50ZS zone splitter panel, which handles up to 24 separate audio circuits. Suited for schools, office buildings, and factories, they offer full supervision in active and standby conditions and provide up to 5 customizable messages. Manual paging allows first responders to provide precise evacuation directions to occupants. Read More

communication systems & equipment, safety & security equipment

Voice Evacuation Systems facilitate orderly evacuation.

December 23, 2004

Networkable Audio Evacuation Systems support up to 6 channels of digital audio, including line paging and 2-way telephone communications, plus various control functions, all operating on single pair of wires or fiber optic cables. Units provide prerecorded messages and emergency paging during life safety emergency. They are available as integrated systems within panel, as well as expansion systems in addendum to panel. Read More

controls & controllers, safety & security equipment

Fire Alarm Control Panel offers auto-programming.

August 19, 2004

Featuring surface-mount technology, Model MS-9200UD includes automatic detector test capability, drift compensation, and maintenance alert. Built-in communicator is compatible with 14 different formats, including Ademco Contact ID, allowing reporting of addressable point or software zone status without optional Digital Alarm Communication Transmitter. Additional features include remote site upload/download capability and selectable strobe synchronization. Read More

communication systems & equipment

EVAC Panel splits 50 W of audio power to 8 zones.

July 13, 2004

Model ACC-25/50ZS Audio Command Center Zone Splitter System allows user to record 5 field-programmable messages with integral microphone or from external audio source. It offers full supervision of active alarm and standby conditions, as well as amplifier outputs, field wiring, message generation, and tone generators. Model ACC-25/50ZS activates via reverse polarity or contact closure, allowing unit to stand alone or be added to fire alarm control panel. Read More

controls & controllers, safety & security equipment

Control Panel has remote programming/monitoring capabilities.

May 21, 2004

Manufactured with SMT, MS-9600 V2 addressable fire alarm control panel is offered with Digital Alarm Communicator Transmitter option that provides remote site upload/download and remote monitoring capabilities. It also lets technicians diagnose system problems remotely. Features include 14.4 kbaud modem, 2 Notification Appliance Circuits, and fire protection technologies such as Maintenance Alert, Automatic Detector Test, and Sensitivity Printout. Read More

controls & controllers

Fire-Alarm Panels control up to 30 zones.

March 19, 2004

Flex 402 and 404 control panels provide drift compensation, maintenance alert, and freeze warning as well as 3-6 A of Notification Appliance power. They also provide built-in synchronization of ANSI audible signals and ADA-compliant strobes. Flex 405 (5 zone) and Flex 410 (10-30 zone) panels utilize built-in, field-programmable Digital Alarm Communicator Transmitter and feature event history buffers with time/date stamp, and zone enable/disable capability. Read More

safety & security equipment

Software monitors up to 250 fire alarm panels.

February 17, 2004

SmartView(TM) is for use with Series 600 addressable fire alarm control panels. It presents information through graphical menu system and color display while operating over high-speed Ethernet LAN/WAN or single-user network. Each alarm or supervisory event is displayed on color-coded display or with floor plan pinpointing alarm location and point-specific information. User actions and events are logged and recorded for creation of customized reports. Read More

controls & controllers, safety & security equipment

Fire Alarm Control Panel suits small/med-sized installations.

October 20, 2003

IdentiFlex(TM) 602 analog addressable, fire alarm control panel uses SmartLink(TM) peer-to-peer protocol to connect up to 250 network nodes. SmartStart® self-programming automatically identifies and configures all system modules, circuits, and devices to default alarm mode. XP95 digital communications protocol allows set-up and compatibility with any type of wiring. Fully-digital single or dual SLCs support up to 126 analog points each for event reporting. Read More

Other Company News from
Honeywell Fire Systems Group