Automation System produces cable assemblies.
Built from modular components, TransferModule 6000 includes cable transport system, transfer shuttles, transfer chain, cable loading/unloading stations, control system, and PC-based user interface. Stations can perform stripping, tinning, sealing, shield flaring, and micro-flame soldering, as well as ultrasonic and resistance welding, connector housing insertion, and electrical testing. Typical...
Read More »Cut and Strip Tool is self adjustable.
With ability to strip wires with insulation types from PVC to PTFE, cut-and-strip tool cuts stranded wires up to 8 AWG and solid wires up to 16 AWG. It removes insulation from copper/fiber optic audiovisual, data transmission, instrumentation, signal, and telephone cables up to 11 mm and insulation up to 1 mm. Other features included are replacement blade and jaw inserts, interchangeable...
Read More »Cutting/Stripping Tools accommodate wide wire/cable range.
Able to cut flexible wires up to 8 AWG and rigid wires up to 16 AWG, self-adjusting cut-and-strip tool accepts interchangeable stripping cassettes for stripping insulation types from PVC to PTFE. Also available, cable stripping tool removes insulation from copper and fiber optic audio-visual, data transmission, instrumentation, signal, and telephone cables up to 11 mm and insulation up to 1 mm....
Read More »Cable/Wire Strippers .
Including Models K90-10/2, K90-12/2, and K90-14/2, Bent-Nose NM Romex-® Strippers feature tool steel black oxide finish, precision ground stripping holes, shear type cutting blades, and Klein-Kurve-® handles. Units eliminate need to angle tool, wire, or hand, enabling precise removal of outer jacket of non-metallic cable. They strip, cut, and loop 10, 12, or 14 AWG solid wire, and cleanly shear...
Read More »In-Mold Electronics
To learn more about in-hold electronics (IMEs) and solutions offered by Eastprint, Inc., download now.
Read More »Cable Stripper offers fine adjustment.
Providing 1.0-3.65 in. OD cable range, adjustable Model WS 70 end strips outer jacket and insulating material on 46-69 kV cable. Tool is self-feeding during stripping operation and has fine adjustment feature for blade. Utilizing replaceable blades, stripper features dual handle design, which optimizes leverage during use.
Read More »Tool Kit facilitates installation of crimp style connectors.
Intended for use with Versatile linkÃ-® connectors, Installer's Tool Kit includes hand tool that can terminate fiber and strip jacket to proper length, as well as crimp tool that installs connector with consistent results every time. Blade on termination tool is mounted on gear assembly that rotates blade every time user cuts fiber for even wear. After 1,260 cuts, cutting assembly will stop...
Read More »Electric Wire Stripper requires no blade changes.
Stripping wire sizes from 36-10 AWG, Cosmic 927R wire stripper features micrometer dial for choosing stripping diameter in 0.01 mm increments, and shows selection via digital display. Portable device operates on 100 Vac, 60 VA. Rotating 4 blade stripper allows selection of full or partial pull-off lengths from 1-25 mm. Stripping head rotation and twist (or non-twist) direction is changeable from...
Read More »Wire and Cable Stripper is for small gauge wire.
Cosmic 927R Micro-Cable Stripper strips conductors from 36-10 AWG, and features controls allowing stripping diameters to be set in 0.1 mm increments. Machine is capable of stripping lengths from 1-25 mm, with partial lengths of 1 mm possible. Device features 1.5 sec maximum cycle time, and is suited for use with TeflonÃ-® insulation, rubber, and various wire and cable insulations and jackets.
Read More »Eraser's HTS Series Handheld Thermal Wire Strippers
The HTS1 and HTS2 are Handheld Thermal Wire Strippers perfect for stripping extruded wires with solid or stranded conductors. The HTS1 strips wires from 1/2 OD to 43 AWG (12.7mm - .056mm). The HTS2 strips wires from 18 AWG to 43 AWG (1.02mm - .056mm). With the adjustable heat control the element temperatures can be set up to 1100Ã-
Read More »Electrical Hand Tools suit variety of wire types.
Made of high carbon, heat-treated steel, RIDGIDÃ-® electrical hand tools line comprises 10 models for cutting, stripping, and crimping stranded copper, copper, coaxial, and fiber optic cables. Tools feature RIDG-BACK(TM) cutting blade, return-spring, and cushion-grip handles for operator comfort. Paint-filled tool graphics provide quick and long-lasting identification of all tool functions,...
Read More »Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »