Vision and Imaging Sensors / Detectors

Sensor Hardware enables non-contact color measurement.
Vision and Imaging Sensors / Detectors

Sensor Hardware enables non-contact color measurement.

Model MTCS-FB1 is based on True Color sensors and provides XYZ color measurements repeatable to within 1% accuracy. OEM unit provides measurement area of 30 mm, with white-light LEDs as standard light sources, and includes Bluetooth, USB, or RSxxx interfaces. Sensor signals have resolution of 12 bits at 0.1 kHz center measurement frequency, enabling triggering tolerance of 0.2 mm. Power supply, 2...

Read More »
Light/Proximity Sensor consumes 50 µA during operation.
Vision and Imaging Sensors / Detectors

Light/Proximity Sensor consumes 50 µA during operation.

Supplied in 2 x 2.1 mm transparent ODFN package, ISL29015 enables precise backlight and display brightness control while also enabling applied design to utilize proximity estimates. This ambient- and IR-light-to-digital-converter integrates IR LED driver as well as I-²C/SMBus interface. It can sense ambient light and proximity (via IR light) even under harsh lighting conditions, such as in...

Read More »
Sensors offer non-contact evaluation of welding cap quality.
Vision and Imaging Sensors / Detectors

Sensors offer non-contact evaluation of welding cap quality.

Designed to facilitate proactive maintenance, WTS10 diffuse mode sensors check quality of welding cap fronts and detects faults such as inclusions, faulty dressing, or burrs. They provide stability against discrepancies in position and angle of welding cap, check upper/lower welding caps simultaneously, and provide pre-fault indication. In addition to scratch-resistant mineral glass lens,...

Read More »
Photometric Detector suits low-level light measurement.
Vision and Imaging Sensors / Detectors

Photometric Detector suits low-level light measurement.

Model VL-6000 employs large-area silicon photodiode with precise photometric correction filter (f1' less than 5%) and front barrel housing 50 mm dia achromatic corrected lens. In combination with single- or multi-channel optometer, illuminance resolution is less than 1 microlux (50 -µlx with SNR of 50). Absolute calibration is in amperes/lux (typ sensitivity 477 nA/lx), and optional calibration...

Read More »
Vision and Imaging Sensors / Detectors

CMOS Image Sensor targets notebook webcams.

Delivering 6,800 mV/lux-sec sensitivity, Model OV7740 meets low-light sensitivity demands of notebook PC market. Sensor operates at 60 frames/sec in VGA resolution and 120 frames/sec in QVGA resolution. Featuring 4.2 micron pixel size, OV7740 provides functionality of single-chip camera in 1/5 in. optical format. It supports digital video parallel port, and provides full-frame, sub-sampled,...

Read More »
Optical Flame Detectors are explosion proof.
Vision and Imaging Sensors / Detectors

Optical Flame Detectors are explosion proof.

Designed to protect municipal/industrial waste disposal facilities, SharpEye 40/40I optical flame detectors are fitted with heated window to withstand harshest of conditions, and HART output to offer quality information during installation or maintenance. Detectors are Hazardous Area approved (FM/ATEX/IECEx/CSA) for location in zone I areas and 3rd party performance approved (EN54-10, FM, DNV)....

Read More »
Vision and Imaging Sensors / Detectors

Area Imaging Scanner reads 1D, PDF, and 2D bar codes.

Along with 1.2 megapixel camera for capturing hi-res item images, MS4980 VuQuest(TM) employs aggressive presentation-mode scanning and other features for optimal scanning quality in space-limited areas. End users can incorporate OCR, and TotalFreedom® development platform expands functionality by allowing image processing, decoding, and formatting plug-ins to be loaded directly onto unit. Also,...

Read More »
Vision and Imaging Sensors / Detectors

Kit aids in developing environmental monitoring systems.

Designed to expand PSoC® First Touch(TM) Starter Kit with CyFi(TM) Low-Power RF, CY3271-EXP1 Environmental Sensing Kit helps designers create various sensor-based systems. It includes weather station expansion board with pressure/humidity/temperature/ambient light sensors, operated and monitored simultaneously, and pigtail thermistor board for measuring temperature remotely. Sense and Control...

Read More »
Image Sensors solve complex applications without requiring PC.
Vision and Imaging Sensors / Detectors

Image Sensors solve complex applications without requiring PC.

Designed to support inspections on factory floor without PC, iVu seriesTG Image Sensors feature 752 x 480 CMOS imager and 2.7 in. LCD touch screen display with intuitive interface and configurable inspection parameters. Units offer integrated or external lighting in red, blue, green, or infrared options, as well as remote TEACH, adjustable focus lenses, onboard USB port for upload/download to USB...

Read More »
Vision and Imaging Sensors / Detectors

CMOS Image Sensor offers 13.2 Gbps pixel-rate.

Featuring 13.2 Gbps digital data throughput, 3.0 megapixel LUPA-3000 offers triggered and pipelined synchronous shutter with 485 fps frame rate and windowing capability for undistorted images and accelerated readout. Its 32, 8-bit on-chip digital LVDS outputs facilitate camera design for machine vision and holographic data storage applications. Also, dual slope capability maintains contrast...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics