Tools

Tools

Electronic Angle Grinder features non-locking paddle switch.

Equipped with 12.2 A motor, 6 in. WEP14-150 Quick Angle Grinder/Cut-Off Machine delivers 1,400 W of power, 31 lb-in. torque, and no-load speed of 9,000 rpm. Vibratech side handle minimizes vibration, while deadman function maximizes user safety by turning off automatically when released or dropped. Additional features include Quick toolless wheel change system, burst-proof locking wheel guard...

Read More »
Composite Impact Wrench provides 300 lb-ft torque in reverse.
Tools

Composite Impact Wrench provides 300 lb-ft torque in reverse.

Designed with twin hammer clutch to remove stubborn fasteners, 3/8 in. Model CP7735 features 3-position regulator in forward that provides torque needed without over torquing fastener. Teasing throttle allows operator to have complete control when removing or starting fastener to prevent from stripping threads. Model CP7735 is also available in Â-½ in. version as well as quiet version that...

Read More »
Gear Grinders

Gleason Exhibits New Large Gear Production Technologies at Windpower 2010

Rochester, New York - Wind turbine gears produced by Gleason gear production machines and cutting tools supply over 50% of the world's wind energy. That percentage is expected to increase, with introduction of a host of advanced new technologies designed to improve production, quality and cost of even the very largest wind turbine gears. Visitors to the Gleason booth at Windpower 2010 can learn...

Read More »
New Increased Handle Length on Patented Ballpoint T-Handles
Tools

New Increased Handle Length on Patented Ballpoint T-Handles

Bondhus Corporation has increased the handle length on their smaller sized ballpoint T-handle tools to make them even easier to use. Bondhus' world class lineup of T-handles include Ballpoint, straight hex, Star, and ProHold® tip styles. Only Bondhus T's offer strength, comfort and enhanced grip by welding the handle to the blade, then dipping it in cushioning plastic. All tools are made...

Read More »
Brennan Offers Pre-Setting Tool for Installation Ease
Tools

Brennan Offers Pre-Setting Tool for Installation Ease

Allows pre-setting for single and double ferrule instrumentation installations Both Brennan single and double ferrule instrumentation tube fittings are sold fully assembled and ready for immediate use. In some applications, these fittings need to be installed in a cramped area or overhead where ladders must be used. In these situations, using Brennan's new pre-setting tool may be advantageous as...

Read More »
Tools

BIG Kaiser Introduces HSK Turning Tools for Mill-Turn Centers

Hoffman Estates, IL - BIG Kaiser Precision Tooling Inc. announces the expansion of its turning tool line to include HSK-T63 for Mill-Turn Centers. As popularity of these machines has increased over the years, so too have their tooling options. With this development, BIG Kaiser's extensive modular turning cartridge system now includes holders to support any MTC spindle interface. The HSK-T...

Read More »
Angle Grinding System features optional vacuum.
Surface Grinders

Angle Grinding System features optional vacuum.

Suited for grinding small areas and vertical applications, 5 in. Angle Grinder Surface Prep Kit includes WE14-125 Plus variable speed angle grinder and dust control shroud. Small angle grinder is equipped with 12.2 A motor, offering 1,400 W power, 29.2 lb-in torque, and variable, no-load speed of 7,000-10,500 rpm. When used with optional vacuum, such as Metabo ASR 2050, Surface Prep Kit helps...

Read More »
Turning Inserts promote roughing, finishing efficiency.
Tools

Turning Inserts promote roughing, finishing efficiency.

Beyond(TM) series include RU (Roughing Universal) and UP (Universal Positive) geometries in round inserts for optimal productivity in turning steel, stainless steel, cast iron, and high-temperature alloy. Engineered to promote chip control at lower cutting forces, geometries promote size control, surface finish quality, long tool life, and reduced load spikes. RU geometry suits heavy-duty...

Read More »
MHI's Room-Temperature Bonding Machine for 8-inch Wafers Begins Operation at MEMS Manufacturer in Japan
Bonders

MHI's Room-Temperature Bonding Machine for 8-inch Wafers Begins Operation at MEMS Manufacturer in Japan

Tokyo - Mitsubishi Heavy Industries, Ltd. (MHI) has delivered the first unit of the company's fully automated wafer bonding machine capable of bonding 8-inch diameter wafers - substrates of integrated circuits (IC) - at room temperature, to a domestic MEMS*1 manufacturer. The occasion marks the first time anywhere that this class of room-temperature wafer bonding machine will actually be used for...

Read More »
Sandvik Coromant's CoroTurn® HP Range of Turning Toolholders are Ideal When Using Negative Inserts
Tool Holders

Sandvik Coromant's CoroTurn® HP Range of Turning Toolholders are Ideal When Using Negative Inserts

Sandvik Coromant's accurate coolant jets of CoroTurn HP improve machining performance by delivering cutting fluid at the precise point of cut To meet rising demand for the ability to apply high pressure coolant at point-of-cut when using negative inserts, Sandvik Coromant has extended its CoroTurn® HP range of turning toolholders with integrated high pressure delivery capability. The new...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers