Tools

Tools

Cadence Tools and Flows Achieve Production-Ready Certification for TSMC's 12FFC Process

New technologies enable chip design for emerging mid-range mobility and high-end consumer applications SAN JOSE, Calif., Sept. 11, 2017 - Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that Cadence® digital, signoff and custom/analog tools and flows have achieved v1.0 certification for TSMC's 12nm FinFET Compact (12FFC) process technology and are production ready for customers...

Read More »
GX Tiger·tec® CVD Grooving and Parting Grades come with silver flank face.
Tools

GX Tiger·tec® CVD Grooving and Parting Grades come with silver flank face.

GX Tiger·tec® Silver CVD Grooving and Parting Grades are offered in WKP13S, WKP23S and WKP33S models. These unit’s Silver CVD coating features aluminum oxide for maximum crater wear resistance and improved cutting speed. The WKP13S model is used in high alloy, bearing and carbon steels whereas WKP33S offers maximum toughness. WKP23S Universal grade is used in application ranging from...

Read More »
BT3-USB-MON Bus Monitor Tool features programmable on-board triggers.
Monitoring Systems

BT3-USB-MON Bus Monitor Tool features programmable on-board triggers.

BT3-USB-MON Bus Monitor Tool is designed to monitor and analyze MIL-STD-1553 signals. Unit consists of three tools such as 1553 visualization and recording software, 1553 monitoring hardware and scope outputs for electrical analysis. Product’s integrated differential-to-single-ended 10:1 scope offers output for each bus. Tool comes with an ability to capture 100% fully loaded bus traffic with...

Read More »
Panduit Launches BlackFin™, OSHA Compliant Battery-Powered Installation Tools
Tools

Panduit Launches BlackFin™, OSHA Compliant Battery-Powered Installation Tools

Panduit, a full solutions provider of readily available parts engineered for all aspects of designing, installing and maintaining cabling infrastructure, recently announced the new BlackFin Installation Tools that will replace the current hydraulic power tool line. This global expansion, with over 60 service locations in 41 countries, makes Panduit readily available worldwide. “I am excited to...

Read More »
Bore Gage Setting Tool is made of anodized aluminum.
Tools

Bore Gage Setting Tool is made of anodized aluminum.

Bore Gage Setting Tool is offered in 15.5 in., 45 in., and 85.8 in. sizes. Unit is used for adjusting settings of Mahr's 844 N adjustable bore gage and 844 T universal ID/OD gage. Product uses hand clamping mechanism which sets instrument in horizontal or vertical position. Suitable for lab or production floor, tool offers nominal value setting for internal and external dimensions.

Read More »
Voltclaw Multi-Gauge Tool is non-conductive to 1000V.
Tools

Voltclaw Multi-Gauge Tool is non-conductive to 1000V.

Voltclaw Multi-Gauge Tool features pull hook, sliding wire gripper and V-groove. Unit can be used for wire ranging in size from 6 to 14 gauge. Suitable for residential and commercial systems, product reaches deep inside of junction boxes, switch boxes and service panels. Tool comes with front and rear hook, which is used for small and large gauge wires respectively.

Read More »
Tools

ETB Flash-It Printer Tool can flash lifecycle at any point.

ETB Flash-It Printer Tool is compatible with HP Color LaserJet enterprise flow M880z multifunction printer models such as A2W75A and A2W76A. Unit is suitable for MPS environments. Product allows users to reuse the transfer kit beyond 120k pages. Printer tool sets the transfer kit life to 100% and helps to clear the REPLACE TRANSFER KIT message.

Read More »
Heimatec Offers Live Tools for New Haas BMT Turret
Machining Heads

Heimatec Offers Live Tools for New Haas BMT Turret

Market leader in live tooling can supply complete range of products for new Haas BMT Turret Heimatec, a market leader in live tooling for the North American machine tool industry, announced today that it has an extensive line of tooling available for the new Haas BMT turret. The line includes a variety of driven tools (axial and radial drilling & milling heads) as well as static tool holders....

Read More »
Tools

Canadian Company Ficodis Launches Cromson Tools

A line of top performing tool tailored to the 650,000 Ontarians in the manufacturing and construction industries MONTREAL, Aug. 9, 2017 - Ficodis, a leader in the industrial sector and recognized for offering customized services and solution, launches Cromson, a range of top-quality tools with optimized ergonomics to help companies be more efficient and reduce production costs. Cromson is now...

Read More »
eGrip 3D Design Tool provides online interfacing.
Tools

eGrip 3D Design Tool provides online interfacing.

Allowing users to design and create gripper fingers, eGrip 3D Design Tool offers users to choose aluminum (AlSi10Mg), stainless steel (1.4404) and polyamide 12 (PA 2200 or 2201) materials. Tool determines individual gripper fingers when workpiece data such as STEP or STL file is uploaded with optimal 3D contour. Allowing weight savings between 10 and 50 percent, unit’s aluminum and stainless...

Read More »

All Topics