Tools

Electric Hammers

Impact Tools deliver 180 lb-ft max torque.

Combining impact with capabilities of ratchet, Hammerhead 2015MAX and 2025MAX feature 3/8 and Â-½ in. drive, respectively, with head-height of less than 2 in. and speeds up to 7,100 rpm. Tools include 2-position power regulator and forward/reverse collar that provides unrestricted access to change direction of tool in tight spaces. Knuckle-saver reactionless torque eliminates kickback and...

Read More »
Multi-Bit, Ratcheting Screwdriver combines ergonomics, strength.
Ratchets

Multi-Bit, Ratcheting Screwdriver combines ergonomics, strength.

Designed for electricians, 21-n-1 Twist-a-Nut(TM) has 4 most frequently used bits pre-loaded into driver shaft. Additional 12 bits are securely stored for quick access within handle. Dual interchangeable chrome-vanadium shafts are designed for driving Â-¼, 5/16, and 7/16 in. nuts, and handle also has 2 Accu-Loop(TM) wire looping holes along with Wire-Nut® ratcheting wrench formed into...

Read More »
Ball Bearings

Hubble Telescope Service Mission Featured in 'Hubble 3D' IMAX Movie Aided by Timken® Precision Bearings

CANTON, Ohio, -- In May of 2009, when the future of the Hubble space telescope was hinging on delicate repairs performed by NASA astronauts using ATK's Mini Power Tool, ATK turned to a trusted source for precision components required for the job. Now ATK and Timken play a supporting role, featured larger than life with astronauts performing the precarious spacewalk repair in the movie "Hubble...

Read More »
Tools

Marathon Compressions

LMT Onsrud LP is introducing the Marathon Compression tool series, which provides advanced cutting tool geometry and a coating that protects the cutting edge against deterioration. Below are the latest test results showing the improved performance! Location: LMT Onsrud LP Test Lab Material: Â-¾ double-sided melamine Tools Tested: 3/8" diameter Marathon Compression and ½" diameter...

Read More »
Manual Compression Crimping Tool is ergonomically designed.
Hand Crimpers

Manual Compression Crimping Tool is ergonomically designed.

While engineered to minimize handle force required to complete crimp, Sta-Kon® Comfort Crimp® Compression Tool also employs Shure-Stake® mechanism that ensures complete crimp cycle is made before tool will release to open position. Over-molded handles naturally place operator's hands in safe, strain-reducing position and also create soft cushion for fingers and palms. Also...

Read More »
Surface Treatment Equipment

Concrete Floor Systems are offered in three versions.

Combining proprietary scrubbers and Diamabrush tools, Finished Concrete Systems enhance image of facility while making floor easier to clean and maintain. Polished Concrete process hones concrete surfaces to progressively smoother, shinier, and brighter finish using diamond grit tools. With Easy-Prep, abrasive diamond grit tools can prepare concrete floors for Tennant floor coatings. Aggressive...

Read More »
Reciprocating Saw Accessories facilitate material removal.
Miscellaneous Blades

Reciprocating Saw Accessories facilitate material removal.

Compatible with all Milwaukee SAWZALL® and Hackzall® Recip Saws, Scraper Blades are available in 1½ and 3 in. sizes and are suitable for removing linoleum flooring, strong adhesives, paint, glue, thin-set, drywall mud, and rust. Blades feature induction hardened edges, corrosion-resistant coating, and chamfered corners. Grout Removal Tool, with curved cutting edge, coarse carbide grit,...

Read More »
Fin Tube Removal Tool eliminates chipping hammers and grinders.
Tools

Fin Tube Removal Tool eliminates chipping hammers and grinders.

Featuring air-powered design, MILLHOG® clamps to tube I.D., separating fin from tube and beveling tube end, all in one step. Tool has no reaction torque to user, is chatter-free, and can remove 4 in. of fin from tube in under 2 minutes. Cutter blade, made from high-grade tool steel, can be resharpened, while heavy-duty rack-and-pinion feed mechanism assures smooth operation. No cutting...

Read More »
Drilling Machinery

Six ONS Innovation Awards Nominations for Aker Solutions

19 August 2010 - The ONS Innovation Awards is one of the oil industry's most prestigious accolades. This year, six of Aker Solutions' technologies have been nominated by the ONS (Offshore Northern Seas) jury. "We provide solutions for the future with these six nominated technologies", says chief technology officer in Aker Solutions, Åsmund Bøe. "All of our innovation ability, technical...

Read More »
Process Machinery

LORD Corporation Advances Materials Development with DEK Galaxy and Wafer Transport Solution

Enjoying the materials innovation success it has realized with its first DEK Galaxy system, Cary, North Carolina-based LORD Corporation recently expanded its development capacity with the addition of a second Galaxy equipped with DEK's new Wafer Transport Solution. Our first Galaxy has proven to be an integral part of our wafer-applied underfill (WAU) materials program," explains Candice Brannen,...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers