Tools

Squeeze-Off Tools feature variety of stops.
Hand (Tool) Clamps

Squeeze-Off Tools feature variety of stops.

Supporting nominal diameters of 3-6 in. and 3-8 in., respectively, Models PES6 and PES8 compress polyethylene plastic tube/pipe to stop flow of water or gas. When used properly, pipe will return to its original shape and normal flow rates. Manual version develops clamping force by operator physically turning handle on long screw, while hydraulic version uses pump and cylinder for clamping....

Read More »
Cordless Driver-Drill weighs less than 4 lb.
Hand Held Drills

Cordless Driver-Drill weighs less than 4 lb.

Powered by 4-pole motor, Model LXFD0118V LXT Lithium-Ion Cordless Â-½ in. Driver-Drill delivers 480 lb-in. max torque and 290 lb-in. PTI torque. Unit has 16 clutch settings and 2-speed all-metal transmission for no-load speeds of 0-400 rpm on Low and 0-1,500 rpm on High. Charging on ENERGY STAR®-qualified Rapid Optimum Charger, Lithium-Ion battery reaches full charge in 30 minutes....

Read More »
Blind Threaded Insert Installer delivers consistent performance.
Tools

Blind Threaded Insert Installer delivers consistent performance.

Used where only one side of panel is accessible for hardware installation, portable ATLAS® AE938 installs steel, brass, aluminum, or stainless steel blind threaded inserts that provide strong threads in thin panel sections. Pressure-controlled setting allows for installation of same insert type into various material thicknesses without requiring adjustment, while pull-to-pressure feature...

Read More »
Tools

Makita 18V LXT Cordless Rules in off Road Racing

New videos capture three top drivers talking about Makita, winning races, and skateboards La Mirada, CA - The Lucas Oil Off Road Racing Series (LOORRS) rumbled through Glen Helen Raceway last month. One thing was loud and clear, even above the roar of 900HP race trucks: Makita 18V LXT rules in off road. Makita 18V LXT cordless tools can be found in the hands of skilled mechanics from the top...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Powered Pipe and Tube Cutter eliminates need for ratcheting.

Featuring capacity up to 1 5/8 in. OD, Model TC-40 cuts polyethylene, polypropylene, PEX, rubber hose, PVC, and CPVC. Unit features 75 W motor that drives pointed X-CEL® blade to provide square, precise cut in 4 seconds. Repeat cuts can quickly follow with use of push-button blade release. Forward and reverse blade operation is possible via single trigger on front of tool. Powered by...

Read More »
Tools

Insulated Torque Wrenches

Provides Operator Safety for High Voltage & Electrical Assembly Applications San Jose, Calif., - For life-threatening high voltage and low voltage electrical assembly applications where over-torque conditions are not tolerated and operator safety is mandatory, Mountz Inc. offers Insulated torque wrenches. Designed with non-conductive plastic insulation, the torque wrenches provide operators with...

Read More »
Machine Knives

Shrink Wrap Cutting Tool promotes job efficiency.

Combining Ring Cutter and Film Knife tools into one unit, Wrap n' Strap Knife provides safe and convenient tool with which user can cut strapping and film. One side of tool is designed to cut woven cord strap, while other is optimized for making clean, smooth, and even cuts for shrink wrap. Two additional blades are included to facilitate replacement, and tool is sized to fit snugly in back...

Read More »
Inspection Equipment

Perceptron® and Greenlee® Announce the Greenlee® FF200 FishFinder(TM) Product Launch

Plymouth, Michigan, - Perceptron, Inc. (NASDAQ:PRCP) today named Greenlee Textron Inc., a Textron Company, ("Greenlee"), as the strategic customer it signed in the electrician's market vertical and announced their first new product, the Greenlee FF200 FishFinder(TM), the first visual inspection product that incorporates a CAT IV safety-rated imager. Perceptron had previously announced during 2010...

Read More »
Cordless Impact Wrench delivers 0-3,000 ipm.
Tools

Cordless Impact Wrench delivers 0-3,000 ipm.

Powered by 12 V Lithium-Ion battery, 3/8 in. Model WT01W is equipped with 0-2,300 rpm variable speed motor that delivers 1,000 lb-in. max torque for range of fastening applications. Wrench has heat hardened steel hammer and anvil and built-in LED light to illuminate work area. Measuring 6 3/8 in. long and weighing 2.1 lb, tool includes 2 batteries, charger, and tool case. It is also available in...

Read More »
Multifunctional Rescue Tool features pocket-sized design.
Wedges

Multifunctional Rescue Tool features pocket-sized design.

Measuring 8.8 in. long and weighing 1.1 lb, No. 87 Rescue Tool features hardened cutting edges designed to shear through soft metal and standard battery cables. Narrow jaw fits into tight spaces, while tapered pry wedge helps firefighters, first responders, and EMTs open doors and windows. Additional features include gas shut-off valve slot and spanner wrench, with latter able to tighten/loosen...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers