Tools

Cermet Grade suits finishing applications.
Cutting Tool Inserts

Cermet Grade suits finishing applications.

Suited for producing high-quality surfaces in turning operations, CT5005 is designed for high-speed, high-production finishing applications with or without coolant. Uncoated grade provides sharp edge that works with smeary materials and facilitates close tolerances. Environmentally friendly, wear-resistant product contains no nickel.

Read More »
Hex Tools eliminate dropped screws.
Tools

Hex Tools eliminate dropped screws.

ProHold(TM) Tip screw-holding hex tools incorporate non-magnetic, corrosion-proof button that securely holds screws to tool at any angle. Button is located on flat of hex tool, allowing product to deliver full torque of company's Potanium® steel. Tools are available in inch and metric hex sizes from .050-3/8 in. and 1.27-10 mm and have Proguard(TM) corrosion-resistant finish.

Read More »
Tools

Plier Set is suitable for work on delicate installations.

LCS-4 gift set contains 4 LITTLE CHAMP® precision pliers: No. 30, 4 in. Flush Cutter; No. 31, 5 in. Long Nose; No. 32, 4 in. End Cutter; and No. 33, 4 in. Short Nose. Drop-forged from Solingen high-carbon steel, product is suitable for working on small components or intricate wiring. Offerings include European box joint style, induction-hardened cutting edges (60/62 HRC), leaf-spring joint...

Read More »
Coated Carbide Grades turn cast and ductile irons.
Tools

Coated Carbide Grades turn cast and ductile irons.

Grade KC9325, suited for gray cast and nodular irons, performs under interrupted cut conditions, and Grade KC9315, suited for use with ductile irons, employs coating that resists flank wear. Both grades reduce production time without any reduction in tool life. Grade KC9325 has MTCVD TiCN coating and fine grain aluminum oxide coating layer for total thickness of 16 microns, while Grade KC9315 has...

Read More »
Cable-Tie Tool is ergonomically designed.
Tools

Cable-Tie Tool is ergonomically designed.

GTH installation tool, for standard to heavy cable ties, controls tension and cutoff of cable tie during installation. Product provides consistent use over many cycles with tension adjustment for changing and confirming settings. Narrow nose allows for access within space-restricted areas.

Read More »
Cable-Tie Tool offers pushbutton operation.
Tools

Cable-Tie Tool offers pushbutton operation.

PTS installation tool, for subminiature through standard cross section cable ties, utilizes pneumatic operation to automatically tension and cut off cable ties in less than 1 sec. Ergonomic design incorporates cushioned, non-slip handle and controlled tip ejection that retains cut-off tip. Tension-adjustment knob and fine-adjustment dial confirm and change tension settings. Narrow nose provides...

Read More »
Roll Groover handles pipe sizes up to 1½ in.
Groovers

Roll Groover handles pipe sizes up to 1½ in.

Model RG1.5, for mechanical contractors and sprinkler fitters, uses body of company's 2-1 product to hold roll-grooving wheels and requires 360° rotation to groove pipe. RG1.5KIT Groover Kit, #08530, converts standard pipe cutter to roll groove 1Â-½ in. and smaller pipe. Kit #08531 is a pack of 3 groover wheels.

Read More »
Electrician's Tool aids in fixing/removing light switches.
Tools

Electrician's Tool aids in fixing/removing light switches.

SwitchGrip® aids users in fixing/removing electrical 15 A, 120 Vac light switches by holding on to single pole or 3-way switch with magnet, giving user control and stability. During installation of light switches user has control over stiff wires, and tool increases safety by keeping users' hands away from live wires and metal. Product is small enough to use with power or manual...

Read More »
End Prep Tool repairs boiler tubes.
Machinery

End Prep Tool repairs boiler tubes.

Wart MILLHOG® Right Angle ID Clamping End Prep Tool features gear drive supported by dual-opposed tapered roller bearings, separate bearing to support cutter head, and EscoLock(TM) wedge-style blade lock system. Requiring only 2 5/8 in. wide clearance to fit between boiler tubes, tool features handle with ratchet for clamping to tube ID and knurled knob to simplify positioning. Tool...

Read More »
Tools

Wafer-Handling System is SMEMA compliant.

Fully automated Adept WLM, for SMEMA compatible screen/stencil printers, supports wafer sizes up to 300 mm, including thinned wafers. Modular system can be expanded and reprogrammed for use as back-end cluster tool by adding wafer interface for reflow oven or other process tools. System supports optional wafer and lot tracking, and has 14 in. monitor and keyboard with integrated GUI. It is...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers