Tools

Cordless Driver/Drills have compact size.
Hand Held Drills

Cordless Driver/Drills have compact size.

Compact Series of 12 and 14.4 V Cordless Driver/Drills employ Clip-Lok(TM) System and feature single-sleeve, ratcheting chuck; 2-speed motor that operates from 0-400/0-1,400 rpm and produces 390 lb-in. torque (14.4 V model); and 20-position clutch. Suited for drilling and fastening, 12 V unit has 3/8 in. capacity chuck, while 14.4 V unit has Â-½ in. capacity chuck. Reversible battery may be...

Read More »
Orbital Finishing Sander suits wood, plastics, and metals.
Tools

Orbital Finishing Sander suits wood, plastics, and metals.

Offered with rubber-coated top that deadens vibration, model Sr356, 1/3 sheet sander also incorporates 2-position side handle for operator control. Unit has no protruding parts and die-cast aluminum base plate. Sandpaper clamping system incorporates rubberized pressure pads for gripping and tensioning of sanding sheet, while auxiliary fan provides for self-contained dust collection or external...

Read More »
Tools

Wafer Handling Module suits semiconductor process tools.

Apex platform combines direct-drive AWARD wafer handling robot with SmartServo distributed controls architecture based on IEEE-1394 serial bus. It handles wafer sizes up to 300 mm, configurable with any combination of open cassette, SMIF, and FOUP loadports. SmartController provides direct interface to existing process tools via ASCII and GEM/SECS command interfaces. System supports vacuum and...

Read More »
Star Tipped Tools never drop screws.
Tools

Star Tipped Tools never drop screws.

ProHold(TM) Tip screw holding tools include star tip drivers that fit all common star head screws. Tip of each tool has non-magnetic, corrosion-proof button that holds screws to tool, thus eliminating dropped screws in hard to reach applications. Design allows each tool to deliver full torque of Potanium® steel. Tools are offered with ProGuard(TM) finish, which provides corrosion protection.

Read More »
Combination Shear/Plier cuts wire, grips, and forms leads.
Hand Shears

Combination Shear/Plier cuts wire, grips, and forms leads.

Model 475C combines full by-pass shear cutter and short nose plier into one hand tool. It is constructed from high carbon steel and has soft Xuro-Rubber(TM) cushioned hand grips and Light Touch(TM) return spring. Precise enough to grasp one human hair, product cuts up to 12 AWG copper wire. Tool is suited for various types of assembly and wire processing.

Read More »
Boiler Tube End Prep Tool fits into tight areas.
Tools

Boiler Tube End Prep Tool fits into tight areas.

Esco Mongoose MILLHOG® right angle drive ID clamping end prep tool utilizes push-pull clamp and release mechanism with attached wrenches to bevel tubes with 5/8 in. ID to 3 in. OD. Its 2/3 hp pneumatic motor generates cutting torque at the bit capable of machining stainless steel and alloyed tubing. Suitable for performing any angle of prep, tool includes dual opposed tapered roller...

Read More »
Tools

Tongs suit bending, forming, and seaming applications.

Fairmont Tongs, available in Straight and Offset versions, feature heavy-duty construction and are available with optional cushioned grips. Tongs produce uniform, precise bends in sheet steel and non-ferrous metals. Forged steel jaws and handles are zinc-plated. Jaws measure 3 in. wide and 1 1/8 in. deep and have bending marks that aid in making precise depth bends.

Read More »
Pneumatic Assembly Tool offers 3-in-1 operation.
Tools

Pneumatic Assembly Tool offers 3-in-1 operation.

Pneumatic Assembly Tool joins PEX plumbing connections, splices aircraft control cable and wire rope assemblies, and crimps electrical connectors. Powered by air pressure of 85-95 psi, unit adapts to different applications with variety of quick-change crimping jaws. Full safety, 2-finger trigger activation is easy to use with or without work gloves. Unit can be operated from left or right handed...

Read More »
Tools

Adapter Plate Kit simplifies engine removal.

EngineOut Kit helps remove engine from front engine/rear wheel vans. It comes in choice of Chevy, Chrysler, or one of 3 Ford Engine Plates. Adapter Plate bolts to front of engine where water pump has been removed. Hoist Arm installs in engine hoist and Angle Adjuster controls engine tilt. With engine held by front instead of top, user can easily lift and tilt engine as necessary for removal and...

Read More »
Pistol-Grip, 1/2 in. Drill drills large and small holes.
Hand Held Drills

Pistol-Grip, 1/2 in. Drill drills large and small holes.

Housed in ergonomic package, BE1020 provides 248 lb-in. torque and incorporates 2-speed gearbox, S-automatic safety clutch, and winding protection grid. It also features electronic carbon brush wear indicator and Vario-Tacho-Constimatic full-wave electronic speed control. Drilling capacity is 5/8 in. (steel) and 1 9/16 in. (softwood). Utilizing 8.2 A motor, product has no-load speeds rated at...

Read More »

All Topics