Tool Boxes, Chests and Cabinets

Foam-Filled Totes will protect cargo.
Instrument / Tool / Equipment Cases

Foam-Filled Totes will protect cargo.

Rotationally molded Roto-Rugged Totes are filled with layers of 2 in. foam, and come with foam-cutting knife. Cases have telescoping handle that extends to 41 in. and stores flush in case. All have black powder coated tongue and groove valance that resists scratches, recessed military-style quarter-turn latches, ball-bearing wheels, full-length piano hinges, spring-loaded handles and padlock...

Read More »
Storage System protects tool investments.
Miscellaneous Storage Equipment

Storage System protects tool investments.

Maximum Security tool storage system comes with Remote Patrol electronic security system, which provides keyless entry and motion detector. System features Lock n' Roll drawers with non-slip liners, tubular locking system, and non-directional rubber mat. Top chest has 16,101 cubic in. capacity and measures 21 x 54 1/4 x 24 in. Roll cab has 2 sliding parts trays and one tote tray. It can...

Read More »
Tote Bags come in camouflage colors.
Bags

Tote Bags come in camouflage colors.

Camouflage Totes are constructed of rugged, tear-resistant nylon polyester imprinted with leafy camouflage pattern. Totes have zipper closures to prevent tool loss, reinforced bottoms for durability, and removable shoulder straps. Nylon-stitched and rivet reinforced for durability, totes are available in all popular sizes and shapes. BucketBag(TM) Tool Carrier, which fit over rim of standard...

Read More »
Chests and Cabinets offer sidewall post construction.
Storage Cabinets

Chests and Cabinets offer sidewall post construction.

Traxx(R) ball-bearing chests and roller cabinets have Posi-Latch(TM) drawer securing system that provides positive latch for each drawer and reduces accidental opening. Drawer liners cushion tools and suspend them off drawer bottoms. Units include heavy-duty tubular side handles, angled cover, and crossbar chest stiffener. Heavy-duty casters are installed on 60, 50, and 40 in. units.

Read More »
Top Chest adds dimensions to roll cabs.
Tool Boxes, Chests and Cabinets

Top Chest adds dimensions to roll cabs.

Made of high-strength steel, KRAH5330 Bulk Storage Top Chest is 20 in. deep, 53 in. wide and 15 in. tall. Garage style front door is equipped with 3-point locking device that secures chest and keeps door closed when unit is moved. Top Chest firmly stacks as third unit above 53 in. roll cab and top chest combination. It can be used as charging station or to stow shop-related accessories.

Read More »
Cabinet organizes metric taps, drills, and dies.
Instrument / Tool / Equipment Cases

Cabinet organizes metric taps, drills, and dies.

Metric Cabinet is 14-5/8 in. wide x 7-3/8 in. deep x 7-3/4 in. tall, and fits onto work benches, storage shelves at workstations, or tool cribs. It has 3 drawers and 27 compartments to hold metric taps, drills and dies from 2.5 x 0.45 up to 12.0 x 1.75. Each compartment is pre-labeled on drawer-pull. Cabinet is fabricated from CRCQ steel with phosphate pretreatment and powder coat finish.

Read More »
Tool Cabinets form core of machining centers.
Tool Boxes, Chests and Cabinets

Tool Cabinets form core of machining centers.

Tool storage cabinets and transporters are equipped with tool holder frames and tool holders to accommodate variety of standard-sized NC tools. Cabinet drawers and roll-out trays have 440 lb load capacity, while transporters have rigid steel frame and steel sheet side panels slotted at 1-in. intervals to accommodate trays, frames, shelves and other accessories. Fully loaded transporters and...

Read More »
Generator/Air Compressor also provides tool storage.
Electrical Power Generators

Generator/Air Compressor also provides tool storage.

Power Pack, with Kohler 5000 W, continuous-duty generator set and Ingersoll Rand 11.3 cfm @ 90 psi Air Compressor, provides power for uses such as supporting 130 A wire feed welder, air wrenches and nail guns, and emergency power needs. Locking control panel has 120V and 240V outlets. Aluminum tread-plate box, with 2.8 cu ft storage area, holds wire-feed welder, enlarged fuel tank, power tools or...

Read More »
Tool Chest rolls around on big casters.
Tool Boxes, Chests and Cabinets

Tool Chest rolls around on big casters.

Traxx tool storage combines 10-drawer chest and 13-drawer roller cart on 5 x 2 in. casters. Chest and cabinet are both 18 in. deep for maximum storage capacity. It has quick-release ball-bearing slides that allow drawers to interchange, double-bitted lock with rounded collar for security, and 4-in.-deep drawer to hold deep-well sockets and other commonly used tools. Chest dimensions are 51 in....

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics