Timers

WAGO Heavy-Duty Solid State Relay and Timer
Time Delay Relays

WAGO Heavy-Duty Solid State Relay and Timer

GERMANTOWN, WI - WAGO Corporation's Custom Products Division has shoehorned a 6A Solid State Relay and User-Configurable On/Off Delay Timer into a 6mm housing. Engineered for high cycle applications, 859 Series Solid State devices surpass the performance of 5mm/2A units while providing greater adaptability than 6A 11- and 22mm-wide units. Eliminating electromechanical elements, 859 Series avoids...

Read More »
Circuits

Timer IC combines low power consumption, ease of programming.

Supplied in low-profile, 8-pin, 2 x 2 mm TDFN package with exposed back-side paddle, TS3001 CMOS oscillator/timer consumes 1 Â-µA supply current at 25 kHz and operates from single 0.9-1.8 V supply. Operation is specified over -40 to +85°C range, and timer frequency is set with one resistor. Additional characteristics include frequency out period drift of 0.021%/°C, PWMOUT duty...

Read More »
Multifunction Devices operate as timers, counters, tachometers.
Counters

Multifunction Devices operate as timers, counters, tachometers.

Available in standard 1/16 DIN size, CTT series accepts voltage and non-voltage inputs from NPN, PNP, or dry contact sensors and can operate as digital counter, timer, combination timer/counter, or tachometer. Counting speeds are selectable to 10,000 cycles/sec, and double-line, 6-digit, 2-color LCDs present values and facilitate setup. While Output 1 is SPST relay and NPN transistor that operate...

Read More »
Timers

Dual Channel Timer has programmable memory.

With 1 sec resolution and 0.01% accuracy, Traceable® Flashing LED Big-Digit Dual Channel Timer allows simultaneous timing on 2 distinct channels from 99 hr, 59 min, 59 sec to 1 sec. Each channel has distinct electronic alarm and visual indicator for when zero is reached. Alarm may be turned off or will silence automatically after 1 min. The 5/8 in. high LCD digits promote readability, and...

Read More »
Marking Equipment

UPM RFID and Partners to Exhibit NFC and RFID Innovations at RFID Journal Live! 2012

UPM RFID, Tampere - UPM RFID is joining with partners Cellotape, ChronoTrack, Mid-South Marking Systems and Seeonic to present the latest NFC and RFID solutions and applications at the tenth annual RFID Journal Live! Conference, April 3-5 at Walt Disney World, Swan and Dolphin Resort in Orlando, Florida. Visitors to Booth #512 will experience: o Cellotape displaying an assortment of printed...

Read More »
Digital Timer Meets UL 294 in Conjunction with any Momentary Button
Latches

Digital Timer Meets UL 294 in Conjunction with any Momentary Button

The UL Listed Latching/Timer Module is compatible with all UL Listed momentary Stopper® Station buttons or can be used with any UL Listed access momentary button. The LT-1UL also allows a momentary button to be used in a latching mode that can be reset with a contact closure. This reliable and highly accurate device offers an auto reset feature. When installed with a normally open contact...

Read More »
Oscillators

Silicon Timer IC requires 1 resistor and 1 capacitor.

Housed in 2 x 2 mm TDFN-8 package, Model TS3002 is fully specified to operate at 1 V while consuming 1 Â-µA supply current at output frequency of 25 kHz. Single-supply CMOS oscillator/timer requires just 1 resistor and 1 capacitor to set output frequency. Operating from -40 to +85°C with FOUT Period Drift of 0.044%/°C, device is suited for portable and battery-powered equipment.

Read More »
Timers

Adjustable Alarm Timer provides 0.01% accuracy.

Featuring 1 in. high digits and microcomputer chip that allows memory to store countdown settings, Traceable® Flashing LED Alert Big-Digit Alarm Timer counts down from 99 minutes, 59 seconds to 1 second. When zero is reached, timer starts counting up to show time elapsed since alarm sounded. Adjustable alarm has 3 settings: high volume for noisy areas, low for quiet environments, and muted...

Read More »
Electric Digital Timer Now UL Listed
Relays

Electric Digital Timer Now UL Listed

The UL Listed Latching/Timer Module is compatible with all UL Listed momentary Stopper® Station buttons or can be used with any UL Listed access momentary button. The LT-1UL also allows a momentary button to be used in a latching mode that can be reset with a contact closure. This reliable and highly accurate device offers an auto reset feature. When installed with a normally open contact...

Read More »
Electrical Regulators

Fairchild Semiconductor Increases Focus on Mobile Handset Market

Long-Time Provider of Signal Path, Power Management Semiconductor Solutions Expands Mobile IP Portfolio SAN JOSE, Calif. - Fairchild Semiconductor (NYSE:FCS), long-acknowledged as a power semiconductor leader, is increasing its focus on the mobile handset market. The company is building on its success in the development of semiconductor solutions that deliver new levels of functionality to help...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics